• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.2
• /
• pp.133-138
• /
• 2003

In this paper, we analyzed a two-branch polarization diversity at a mobile station in NLOS environment when a base station transmits a circularly polarized wave. In order to calculate the correlation coefficient considering the XPD(cross polarization discrimination) between the received signals for the two diversity branches, a simple theoretical model of circular polarization diversity is adopted. From the analysis results, it can be seen that the XPD of circularly polarized wave is less than vertically polarized wave about 6~7 dB in measurement results. And also, it is clearly seen that the correlation coefficient of circular polarization diversity evaluated by the XPD is less than that of vertical polarization diversity.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.1 no.1
• /
• pp.19-31
• /
• 2007

RFID tag is detected by an RFID antenna and information is read from the tag detected, by an RFID reader. RFID tag detection by an RFID reader is very important at the deployment stage. Tag detection is influenced by factors such as tag direction on a target object, speed of a conveyer moving the object, and the contents of an object. The water content of the object absorbs radio waves at high frequencies, typically approximately 900 MHz, resulting in unstable tag signal power. Currently, finding the best conditions for factors influencing the tag detection requires very time consuming work at deployment. Thus, a quick and simple RFID tag detection scheme is needed to improve the current time consuming trial-and-error experimental method. This paper proposes a back-propagation learning-based RFID tag detection prediction scheme, which is intelligent and has the advantages of ease of use and time/cost savings. The results of simulation with the proposed scheme demonstrate a high prediction accuracy for tag detection on a water content, which is comparable with the current method in terms of time/cost savings.

• Nuclear Engineering and Technology
• /
• v.37 no.5
• /
• pp.447-456
• /
• 2005

Laser driven accelerators promise to provide an alternative to conventional accelerator technology. They rely on the excitation of large amplitude density waves in a plasma by the photon pressure of an intense laser. The density oscillations in which electrons and ions are separated, result in extremely large longitudinal electric fields that can be several orders of magnitude larger than those that are used in today's radio-frequency accelerators. Whereas this principle had been demonstrated experimentally for nearly two decades, it was not until 2004 that the production of high quality electron beams around 100 MeV was demonstrated. Analysis, aided by particle-in-cell simulations, as well as experiments with various plasma lengths and densities, indicate that tailoring the length of the accelerator, together with loading of the accelerating structure with beam, are the keys to production of mono-energetic electron beams. Increasing the energy towards a GeV and beyond will require reducing the plasma density and design criteria are discussed for an optimized accelerator module. The current progress and future directions are summarized through comparison with conventional accelerators, highlighting the unique short and long term prospects for intense radiation sources and high energy accelerators based on laser-drivenplasma accelerators.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1209-1214
• /
• 2011

Photoacoustics has been broadly studied in biomedicine, for both human and small animal tissues. Photoacoustics uniquely combines the absorption contrast of light or radio frequency waves with ultrasound resolution. Moreover, it is non-ionizing and non-invasive, and is the fastest growing new biomedical method, with clinical applications on the way. This paper provides a brief recap of recent developments in photoacoustics in biomedicine, from basic principles to applications. The emphasized areas include the new imaging modalities as well as translational research topics. A primary PA application in biomedicine is photoacoustic tomography (PAT). The past decade has seen fast developments in both theoretical reconstruction algorithms and innovative imaging techniques, and PAT has been implemented in imaging different tissues, from centimeter-large breast tumors to several micrometer-large single red blood cels (RBC). PAT now provides structural, functional and molecular imaging. Overall, PA techniques for biomedicine are maturing. They have been widely used to study both animal and human tissues. Recently, more and more research focuses on clinical applications. Commercialized PA systems are expected to be available in the near future, and wide clinical PA applications are foreseen.

• Structural Engineering and Mechanics
• /
• v.17 no.3_4
• /
• pp.331-346
• /
• 2004

A new sensor system is proposed for measuring damage indexes. The damage index is a physical value that is well correlated to a critical damage in a device or a structure. The mechanism proposed here utilizes elastic buckling of a thin wire and does not require any external power supply for memorizing the index. The mechanisms to detect peak strain, peak displacement, peak acceleration and cumulative deformation as examples of damage indexes are presented. Furthermore, passive and active wireless data retrieval mechanisms using electromagnetic induction are proposed. The passive wireless system is achieved by forming a closed LC circuit to oscillate at its natural frequency. The active wireless sensor can transmit the data much further than the passive system at the sacrifice of slightly complicated electric circuit for the sensor. For wireless data retrieval, no wire is needed for the sensor to supply electrical power. For the active system, electrical power is supplied to the sensor by radio waves emitted from the retrieval system. Thus, external power supply is only needed for the retrieval system when the retrieval becomes necessary. Theoretical and experimental studies to show excellent performance of the proposed sensor are presented. Finally, a prototype damage index sensor installed into a 7 storey base-isolated building is explained.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.153-156
• /
• 2000

The remarkable progress of electronics and radio communications technology has made our life abundant. On the other hand, the countermeasure of EMC becomes more important socially according to the increased use of electromagnetic waves. It had been required that the absorbing ability of an electromagnetic wave absorber is more than 20 dB, the bandwidth of which is required through 30 MHz to 1,000 MHz for satisfying the international standard about an anechoic chamber for EMI/EMS measurement. From November of 1998, however, the CISPR11 has accepted the extended frequency band from 30 MHz to 18 GHz in the bandwidth of EMI measurement. In this paper, we proposed the cutting com-shaped type satisfying the above requirments and carried out broadband design using the equivalent material constants method. Moreover, we have fabricated it and compared its characteristics with simulated one.

• Journal of Applied Reliability
• /
• v.14 no.2
• /
• pp.97-102
• /
• 2014

Radar is an object-detection system that uses radio waves to determine the range, altitude, direction, or speed of objects. High power amplifier Module is the most critical part of the high-power radar transmitter systems. It can be used to detect aircraft, ships, spacecraft, guided missiles, motor vehicles, weather formations, and terrain. Research related to radar has been conducted in various fields according to improvement of the communication technology. But only performance-originated technology development has been dashed; study concerning environment duality and safety concerning reliability are still insufficient. In general, radar module is exposed to the outside, on the means of moving or fixed in a certain place. It should be guaranteed sufficient immunity for a variety of environmental stresses that can occur in the outdoor. HALT is a great process used for quickly finding failure mechanisms in a hardware design and product. By applying various kinds and extreme level of stresses, we can find the operating limits of products. In thesis, we conducted HALT test of the high power amplifier modules which used in military and automotive radar. After the test, we analyzed environmental weaknesses of high power amplifier modules using conventional construction data.

• IEIE Transactions on Smart Processing and Computing
• /
• v.6 no.4
• /
• pp.299-304
• /
• 2017

A wireless passive sensor network is a network consisting of sink nodes, sensor nodes, and radio frequency (RF) sources, where an RF source transfers energy to sensor nodes by radiating RF waves, and a sensor node transmits data by consuming the received energy. Against theoretical expectations, a wireless passive sensor network suffers from many practical difficulties: scarcity of energy, non-simultaneity of energy reception and data transmission, and inefficiency in allocating time resources. Perceiving such difficulties, we propose a simple contending-type medium access control (MAC) scheme for many sensor nodes to deliver packets to a sink node. Then, we derive an approximate expression for the network-wide throughput attained by the proposed MAC scheme. Also, we present an approximate expression for the optimal partition, which maximizes the saturated network-wide throughput. Numerical examples confirm that each of the approximate expressions yields a highly precise value for network-wide throughput and finds an exactly optimal partition.

• Journal of IKEEE
• /
• v.1 no.1 s.1
• /
• pp.73-82
• /
• 1997

In this paper we analyzed, using Markov modeling, the performance of CSMA/CD over the wireless channel which is characterized by near-far effect, shadowing and Rayleigh fading. The analysis shows that throughput of CSMA/CD is degraded by channel error. However, if capture effect which arises from the randomness of power level of received signal due to the fading phenomena of electromagnetic waves is taken into consideration, the system performance is much improved and the system stability is also made better.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.35.1-35.1
• /
• 2018

Shock waves have been observed in the outskirts of galaxy clusters. They are commonly interpreted as being driven by mergers of sub-clumps, so are called "merger shocks". We here report a study of the properties of merger shocks in merging galaxy clusters with cosmological hydrodynamic simulations. As a representative case, we describe the case where sub-clusters with mass ratio ~ 2 go through an almost head-on, binary-like merger. Because of the turbulent nature of hierarchical clustering, shock surfaces are not uniform, but composed of parts with different Mach numbers. As merger shocks expand from the core to the outskirts, the average Mach number, < $M_s$ >, increases. The shocks propagating along the merger axis could be observed as X-ray shocks and/or radio relics. The kinetic energy through the shocks peaks at ~ 1 Gyr after shock launching, or at ~ 1 - 2 Mpc from the core. The most energetic shocks are found to have the kinetic-energy weighted Mach number, < $M_s$ > $_{\phi}{\simeq}2-3$, and the CR-energy weighted Mach number, < $M_s$ > $_{CR}{\simeq}3-4$. We then discuss the observational implications of our results.