• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2189-2196
• /
• 2009

Theoretical analysis is presented for expending of the usable frequency range of optoelectronic mixing detection in the radio over fiber network system. We define the normalized gain to evaluate the performance of the optical mixing detection, and conform the possibilities of detection for the high frequency signals beyond the cutoff frequency of a photodiode. Optical mixing detection mechanism is analyzed by solving the continuity equation for the carriers of a photodiode. The normalized gain is independent on the signal frequency and the frequency difference between the optical signal and the local signal. Also, the amplitude of the local signal and the bias voltage are needed to be optimized at the same time in order to maximize the normalized gain.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2305-2315
• /
• 2015

Frequency resource value is growing more and more with the development of the wireless communication. With the advent of the current information society comes a serious shortage of frequency resource, as the amount of supply is far from meeting its demands. Thus, cognitive radio (CR) technique is receiving more attention as a way to make use of the temporarily unoccupied frequency resource. In this paper we propose a novel out-of-band spectrum sensing and dynamic channel access scheme for frequency hopping-based cognitive radio ad-hoc networks. At the beginning of each current channel hopping time, member nodes perform spectrum sensing for the next hopping channel. Based on the proposed collision free primary detection notification, member nodes can determine whether they should execute a hopping time extension procedure of the current channel or not. When the primary detected hopping channel is re-idled, the hopping pattern recovery procedure is performed. In this paper we evaluated the performance of the proposed dynamic sensing and hopping channel extension mechanism for the various wireless network conditions. As a result, we show that the proposed method can increase channel utilization and provide reliable channel management operation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.12
• /
• pp.953-962
• /
• 2018

Recently, the Ministry of Internal Affairs and Communications of Japan has reported on a plan for the "effective use of radio waves" to be promoted in the 2020s. This includes promotion of the effective use of public frequencies, reviews of frequency allocation and transition systems, and spectrum usage fee system. Based on the proposals in this study, concrete systems for revising related laws, such as the Radio Law, will be designed and implemented. In addition, the government will jointly conduct research and development as well as verification tests in cooperation with industry, academia, and government. A plan to improve the system for the effective use of radio waves will then be devised. This study examines the policy directions of the frequency utilization system that Japan plans to use for radio waves in the 2020s. The policy directions are analyzed selectively while considering the radio waves utilization system in Korea, and implications for domestic applications are derived. Based on the research from this study, analyzing the radio policies of advanced countries, including those of England and the United States, and utilizing them to establish an effective use plan of radio waves in Korea are deemed necessary.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.9
• /
• pp.4123-4144
• /
• 2016

Vehicular Ad Hoc Networks (VANETs) utilize radio propagation models (RPMs) to predict path loss in vehicular environment. Modern urban vehicular environment contains road infrastructure units that include road tunnels, straight roads, curved roads flyovers and underpasses. Different RPMs were proposed in the past to predict path loss, but modern road infrastructure units especially flyovers and underpasses are neglected previously. Most of the existing RPMs are computationally complex and ignore some of the critical features such as impact of infrastructure units on the signal propagation and the effect of both static and moving radio obstacles on signal attenuation. Therefore, the existing RPMs are incapable of predicting path loss in flyovers and underpass accurately. This paper proposes an RPM to predict path loss for vehicular communication on flyovers and inside underpasses that considers both the static and moving radio obstacles while requiring only marginal overhead. The proposed RPM is validated based upon the field measurements in 5 GHz frequency band. A close agreement is found between the measured and predicted values of path loss.

• Journal of Integrative Natural Science
• /
• v.10 no.4
• /
• pp.216-224
• /
• 2017

In the terrain of the Korean peninsula, mountainous and flat lands are complexly distributed in small areas. Therefore, local severe weather develops and disappears in a short time due to the influence of the terrain. Particularly in the case of local severe weather with heavy wind that has the greatest influence on aviation meteorology, the scale is very small, and it occurs and disappears in a short time, so it is impossible to predict with fragmentary data alone. So, we use weather radar to detect and predict local severe weather. However, due to the development of wireless communication services and the rapid increase of wireless devices, radio wave jamming and interference problems occur. In this research, we confirmed through the cases that when the radio interference echo which is one of the non-precipitation echoes that occur during the operation of the weather radar is displayed in the image, its form and shape are shown in a long bar shape, and have a strong dBZ. We also found the cause of the interference through the radio tracking process, and solved through the frequency channel negotiation and AP output minimizing. The more wireless devices increase as information communication technology develops in the future, the more emphasized the problem of radio wave interference will be, and we must make the radio interference eliminated through the development of the radio interference cancellation algorithm.

• Journal of Communications and Networks
• /
• v.14 no.1
• /
• pp.51-62
• /
• 2012

The exponential growth in wireless services has resulted in an overly crowded spectrum. The current state of spectrum allocation indicates that most usable frequencies have already been occupied. This makes one pessimistic about the feasibility of integrating emerging wireless services such as large-scale sensor networks into the existing communication infrastructure. Cognitive radio is an emerging dynamic spectrum access technology that can be used for flexibly and efficiently achieving open spectrum sharing. Cognitive radio is an intelligent wireless communication system that is aware of its radio environment and that is capable of adapting its operation to statistical variations of the radio frequency. In ad hoc cognitive radio networks, a common control channel (CCC) is usually used for supporting transmission coordination and spectrum-related information exchange. Determining a CCC in distributed networks is a challenging research issue because the spectrum availability at each ad hoc node is quite different and dynamic due to the interference between and coexistence of primary users. In this paper, we propose a novel CCC selection protocol that is implemented in a distributed way according to the appearance patterns of primary systems and connectivity among nodes. The proposed protocol minimizes the possibility of CCC disruption by primary user activities and maximizes node connectivity when the control channel is set up. It also facilitates adaptive recovery of the control channel when the primary user is detected on that channel.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.51-56
• /
• 2017

With the rapid increase in the number of mobile terminals, demand for wireless technologies has sharply increased these days. While wireless communication provides advantages such as ease of deployment, mobility of terminals, continuity of session, and almost comparable transmission bandwidth to the wired communication, it has vulnerability to malicious radio attacks such as eavesdropping, denial of service, session hijacking, and jamming. Among a variety of methods of preventing wireless attacks, the MTD(Moving Target Defense) is the technique for improving the security capability of the defense system by constantly changing the ability of the system to be attacked. In this paper, in order to develop a resilient software defined radio communication testbed system, we present a novel MTD approach to change dynamically and randomly the radio parameters such as modulation scheme, operating frequency, packet size. The probability of successful attack on the developed MTD-based SDR communication system has been analysed in a mathematical way and verified through simulation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.2
• /
• pp.229-236
• /
• 2022

This article studied the radio station inspection method, which utilizes the 8T8R combiner to reduce 5G radio station inspection measurement times. It is a common that 5G radio station inspections measure RF (Radio Frequency) output signals, which correspond to the number of arrayed antennas individually. However, this study suggested a way to save the time spent on existing methods, by comparing measurement values of individual channels and 8T8R. As a result, it is confirmed that when the 8T8R combiner is used, not only the resulting value of radio station inspections was accurate, but also the measurement time being shortened by up to 8 times compared to existing method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.843-852
• /
• 2009

In this paper, we present design, fabrication, and measured results for a frequency upconverter for a wireless communication system of UAV(Unmanned Aerial Vehicle). The specifications of such wireless communication system requires the special features of maximum range of communication as well as deployment in UAV and repairing. The frequency upconverter operating at $5.25{\sim}5.45\;GHz$ in C-band was designed and fabricated considering such special features. The AGC function was included because the required output power should be constant for optimal system operation. The fabricated upconverter showed a constant output power of $+2{\pm}0.5\;dBm$ for the $-15{\sim}-10\;dBm$ input. Spuriouses were below -60 dBc and the adjacent leakage power was below -40 dBc. In addition, LO sources in the upconverter was implemented using the frequency synthesizer with step 1 MHz. This is for the application to the situation where multiple UAVs employed and the possible change of the permitted frequency band. The synthesizer showed a phase noise of -100 dBc/Hz at the 100 kHz frequency offset.

• Korean Journal of Optics and Photonics
• /
• v.15 no.6
• /
• pp.569-574
• /
• 2004

We stabilized the frequency and power of a CW radio-frequency-excited $CO_2$ laser on the peak of the Doppler broadened gain curve using the photoacoustic effect generated from the laser itself. The condenser microphone is installed in the radio frequency discharge chamber to detect a photoacoustic signal. The photoacoustic signal is fed to a lock-in stabilizer as a reference signal for stabilization. The frequency stability is estimated to be better then 5.4${\times}$10$^{-8}$ at the P(20) line. The stabilized output variation was reduced 9.3%, compared to 100% for a free running laser.