• 전기학회논문지
• /
• 제65권10호
• /
• pp.1727-1730
• /
• 2016

Magnetic resonance imaging has a potential to produce clear anatomical as well as functional images of human body. However, the ability to diagnose is limited by signal to noise ratio (SNR) and the resolution of current medical systems. To remove the challenges prevalent due to the use of high field scanners, dedicated radio frequency coils are used. Transverse electromagnetic coils have an advantage of providing homogeneous magnetic field throughout the region but with low signal to noise ratio while surface coils have an advantage of providing higher signal to noise ratio but with low homogeneity. This research combines both the advantage into one by utilizing transmit only transverse electromagnetic radio frequency coils (8 channel) along with receive only surface coils (by varying the number) for better imaging of brain. A 7 Tesla 32-channel close fitting helmet shaped phased-array surface coils along with the combination of 8 channel transmit only transverse electromagnetic coils provided good homogeneity as well as significant SNR improvements throughout the human brain.

• 한국전자파학회논문지
• /
• 제23권8호
• /
• pp.1010-1013
• /
• 2012

정 자장($B_0$)의 세기가 7 T(Tesla) 고자기장 MRI(Magnetic Resonance Imaging) 시스템은 정 자장의 세기가 1.5 T 또는 3 T MRI 시스템에 비하여 인가된 RF(Radio Frequency) 필드의 높은 불균질성을 보여준다. 이러한 문제점를 극복하기 위한 한 방법으로써, 관심 영역에서의 RF 자장이 균일하도록 RF 코일의 각 요소로 들어가는 최적화된 전류의 크기와 위상 값을 얻기 위해서 convex 최적화 방법이 사용된다. 이러한 방법을 7 T MRI 시스템에 다양한 RF 코일에 적용하여 각각의 $B_1^+$ 필드 값을 비교하여 그 성능을 파악하였다.

• 전기학회논문지
• /
• 제64권3호
• /
• pp.429-432
• /
• 2015

Radio Frequency (RF) coils in Magnetic Resonance Imaging (MRI) systems interact with a patient's tissues, resulting in the absorption of RF energy by the tissues. The presence of an electrically conducting medical implant may concentrate the RF energy and causes tissue heating near the implant devices. Here we present a novel design for a medical lead to reduce this undesired heating. Specific Absorption Rate (SAR), an indicator of heating, was calculated. Remcom XFdtd software was used to calculate the peak SAR distribution (1g and 10 g) in a realistic model of the human body. The model contained a medical lead that was exposed to RF magnetic fields at 64 MHz (1.5 T MRI), 128 MHz (3 T MRI) and 300 MHz (7 T MRI) using a model of an MR birdcage body coil. Our results demonstrate that, our proposed design of adding nails to the medical lead can significantly reduce the SAR for different MRI systems.

• Investigative Magnetic Resonance Imaging
• /
• 제24권2호
• /
• pp.67-75
• /
• 2020

When a patient takes an MRI scan, the patient has a risk of unexpected injuries due to the intensive electromagnetic (EM) field. Among the injuries, the tissue heating by the time-varying EM field is one of the main issues. Since an implanted artificial structure with a conductive material aggravates the heating effect, lots of studies have been conducted to investigate the effect around the implants. In this review article, a mechanism of RF heating around the implants and related studies are comprehensively investigated.

• 전기학회논문지
• /
• 제65권12호
• /
• pp.2019-2022
• /
• 2016

In the presence of an electrically conducting medical lead, radio frequency (RF) coils in magnetic resonance imaging (MRI) systems may concentrate the RF energy and cause tissue heating near the lead. A novel design for a medical lead to reduce this heating by introducing pins in the lead is presented. Peak 10 g specific absorption rate (SAR) in heart tissue, an indicator of heating, was calculated and compared for both conventional (Medtronic) lead design and our proposed design. Remcom XFdtd software was used to calculate the peak SAR distribution in a realistic model of the human body. The model contained a medical lead that was exposed to RF magnetic fields at 64 MHz (1.5 T), 128 MHz (3 T) and 300 MHz (7 T) using a model of an MR birdcage body coil. The proposed design of adding pins to the medical lead can significantly reduce the heating from different MRI systems.

• 한국전자파학회논문지
• /
• 제18권6호
• /
• pp.648-655
• /
• 2007

본 논문에서는 유도결합을 이용한 RFID 시스템에서 주변의 RF 잡음의 영향을 감소할 수 있는 이중 코일 안테나를 새로이 제안하고 실험하였다. 이중 코일 안테나는 동일한 구조의 코일 2개가 직렬로 연결되어 있으며 두 코일에 유도되는 잡음 전압의 크기가 같고 극성이 반대가 되어 서로 상쇄되도록 고안된 구조이다. RFID 리더에 이중 코일 안테나를 사용한 경우에 단일 코일 안테나에 비하여 RF 유도 잡음이 약 15 dB 감소하였다.

• 한국전자파학회논문지
• /
• 제19권6호
• /
• pp.603-611
• /
• 2008

본 논문에서는 유도 결합을 이용한 RFID 시스템에서 주변의 RF 잡음의 영향을 감소할 수 있는 다중 코일 안테나를 새로이 제안하고 실험하였다. 다중 코일 안테나는 1개의 중심 코일과 그 주변에 4개의 보조 코일이 등거리에 배치되어 구성되며, 이들을 직렬로 연결하여 중심 코일과 보조 코일에 유도되는 전압이 서로 상쇄되도록 설계된 구조이다. 다중 코일 안테나를 사용한 경우에 단일 코일 안테나에 비하여 유도 잡음이 약 30 dB 감소하였으며, 잡음의 공간적 분포가 급격히 변화하는 환경에서도 유도 잡음의 소거 효과가 매우 높아 이중 코일에 비하여 유도 잡음이 약 16 dB 감소하였다.

• 전기학회논문지
• /
• 제62권8호
• /
• pp.1120-1124
• /
• 2013

Our objective of this study was to reduce radio frequency coil (RF) control time at 3 T MRI systems. A compressed method is proposed with a convex optimization and pseudo-inverse method in multi-channel RF coils. After applying the proposed methods, fields are homogenized with less field data. Even with 80% compression, the fields are well homogenized and localized, indicating that mapping requires only 20% of the original data. Detailed values are compared between each compressed result in and outside the region of interest at 3 T.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권1호
• /
• pp.23-27
• /
• 2018

As the wireless power transfer (WPT) technology based on strongly resonance coupled method realizes large power charging without any wires through the air, there are advantages compared with the wired counterparts, such as convenient, safety and fearless transmission of power. From this reason, the WPT systems have started to be applied to the wireless charging for various power applications such as train, underwater ship, electric vehicle. This study aims for the effect and characteristics of different inserted resonance coil between Tx and Rx coils for charging system of superconducting magnetic levitation (MAGLEV) train. The transfer efficiency and effect are evaluated with helix type, rectangular type copper resonance coil, and HTS resonance coil under bulb and HTS magnet load, respectively. The input power is adapted with radio frequency (RF) power of 370 kHz below 500 W.

• 조명전기설비학회논문지
• /
• 제23권7호
• /
• pp.8-13
• /
• 2009

Plasma enhanced chemical vapor deposition (PECVD) is commonly used for Carbon nanotubes (CNTs) fabrication, and the process can easily be applied to industrial production lines. In this works, we developed novel magnetized radio frequency PECVD system for one line process of CNTs fabrication for charge storable electrode application. The system incorporates aspects of physical and chemical vapor deposition using capacitive coupled RF plasma and magnetic confinement coils. Using this magnetized RF-PECVD system, we firstly deposited Fe layer (about 200[nm]) on Si substrate by sputter method at the temperature of 300[$^{\circ}$] and hence prepared CNTs on the Fe catalyst layer and investigated fundamental properties by scanning electron microscopy (SEM) and Raman spectroscopy (RS). High-density, aligned CNTs can be grown on Fe/Si substrates at the temperature of 600[$^{\circ}$] or less.