• 한국산학기술학회논문지
• /
• 제16권6호
• /
• pp.4125-4130
• /
• 2015

본 논문은 생체신호 (체온, 혈압, 맥박 등)를 측정하는 웨어러블 (Wearable) 디바이스에 장착된 인체 부착용 방사패턴 재구성 안테나의 통신성능 비교에 관한 논문이다. 제안된 안테나의 동작주파수는 블루투스 (Bluetooth) 통신 대역의 2.4 - 2.5 GHz 이며, 안테나의 최대이득은 1.96 dBi 이다. 제안된 안테나는 두 개의 RF 스위치 (PIN diode)를 이용하여 서로 반대방향의 빔을 생성하여 전자기파 신호를 효율적으로 송수신 한다. 또한 제안된 안테나는 탑 로딩(Top Loading)을 이용 세 가지의 각도 변경 ($30^{\circ}$, $90^{\circ}$, $150^{\circ}$)을 통해 각 방사패턴의 지향성 변화를 조사 하였다. 본 논문에서는 방사패턴 재구성 안테나를 통해 전파 간섭이 없는 전자파 차페실의 이상적인 전파환경과 실제 전파간섭이 존재 (Universal Software Radio Peripheral, USRP)하는 스마트 하우스 내에서 웨어러블 디바이스 안테나의 신호대 집음비 (Signal-to-Noise Ratio, SNR) 및 비트 에러율 (Bit Error Rate, BER) 성능 측정을 진행하였다. 두 경우의 측정 비교 시 SNR은 평균적으로 5 dB의 성능저하를 보이며, BER은 최대 10배 증가하여 수신 에러율 (Error rate of receiving signal)이 높아지는 것을 확인하였으며, 본 논문에서 측정한 SNR과 BER의 측정 결과로 전자파기기의 방해전파로 인한 성능저하를 수치상으로 예측 하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2494-2499
• /
• 2007

Self-blast circuit breakers utilize the energy dissipated by the arc itself to create the required conditions for arc quenching during the current zero. The high-current simulation provides information about the mixing process of the hot PTFE cloud with $SF_6$ gas which is difficult to access for measurement. But it is also hard to simulate flow phenomenon because the flow in interrupter with high current, $SF_6$-PTFE mixture vapor and complex physical behavior including radiation, calculation of electric field. Using a commercial computational fluid dynamics(CFD) package, the conservation equation for the gas and temperature, velocity and electric fields within breaker can be solved. Results show good agreement between the predicted and measured pressure rise in the thermal chamber.

• 한국태양에너지학회 논문집
• /
• 제32권spc3호
• /
• pp.207-212
• /
• 2012

It is important to produce the high-temperature and high-pressure air for the concentrated solar power system using the combined cycle. In this paper, we designed two types of tubular receivers to heat up the compressed air and provided their preliminary experimental results for performance evaluation and further improvements. The developed receivers are in a square cavity shape surrounded by flow conduits for easy scale-up and radiation loss reduction. The two receivers were tested with 5 bar air in the KIER solar furnace and evaluated in terms of the outlet temperature and the efficiency.

• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1343-1348
• /
• 2014

A cholesterol-bridge-naphthopyran dyad (NP-MCB) was designed and synthesized. NP-MCB can readily self-assemble into gels under ultrasound-radiation in several organic solvents and the formed gels easily transfer to solution by heat. This reversible process can be repeated many times. Scanning Electron Microscopy results showed that the morphologies of all formed xerogels in different solvents have fibrillar microstructure. The gels formation was due to energy and pressure afforded by the ultrasonic process, resulting in formation of molecular hydrogen bonding and molecular aggregation. NP-MCB displayed the normal photochromism both in solution and gel states. The kinetic results confirm that the colored merocyanine in gels show a slower fading speed than that in solution due to the compact aggregation of NP-MCB molecules in gels. The xerogel film formed in polar gelling solvent had large surface wettability than that in nonpolar gelling solvent.

• Nuclear Engineering and Technology
• /
• 제52권9호
• /
• pp.2034-2040
• /
• 2020

The gas evolution from mixtures consisting of 0.2 M solution of N,N,N',N'-tetra-n-octyldiglycolamide (TODGA) in n-alcohol (n-decanol or n-nonanol) with Isopar-M diluent was investigated during thermal oxidation. The effect of ionizing radiation on their thermal stability has been studied. It has been determined that the volume of gaseous thermolysis products increases by 260% in the case of n-nonanol and 80% in the case of n-decanol compared to non-irradiated solutions. It has been shown that the gas evolution rate and gas volume increase when the irradiated mixture saturated with nitric acid is heated. However, there are no prerequisites for the development of autocatalytic oxidation.

• 한국해양공학회지
• /
• 제11권2호
• /
• pp.91-99
• /
• 1997

This paper presents theoretical formulations and numerical computations for predicting first-and second-order hydrodynamic force on a ship advvancing in waves. The theoretical formulation leads to linearized radiation and diffration problems solving the three-dimensional Green function integral equations over the mean wetted body surface. Green function representing a translating and pulsating source potantial for infinite water depth is used. In order to solve integral equations for three dimentional flows using Green function efficiently, the Hoff's method is adopted for numerical calculation of the Green function. Based on the first-order solution, the mean seconder-order forces and moments are obtained by directly integrating second-order pressure over the mean wetted body surface. The calculated items are carried out for analyzing the seakeeping characteristics of Series 60. The calculated items are hydrodynamic coefficients, wave exciting forces, frequency response functions and addd resistance in waves.

• 소음진동
• /
• 제7권6호
• /
• pp.975-984
• /
• 1997

A direct boundary element method (DBEM) is developed for thin bodies whose surfaces are rigid or compliant. The Helmholtz integral equation and its normal derivative integral equation are adoped simultaneously to calculate the pressure on both sides of the thin body, instead of the jump values across it, to account for the different surface conditions of each side. Unlike the usual assumption, the normal velocity is assumed to be discontinuous across the thin body. In this approach, only the neutral surface of the thin body has to be discretized. The method is validated by comparison with analytic and/or numerical results for acoustic scattering and radiation from several surface conditions of the thin body; the surfaces are rigid when stationary or vibrating, and part of the interior surface is lined with a sound-absoring material.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1060-1065
• /
• 2007

This paper summarizes a design procedure of radiated noise from engine blocks of marine engines. This air-borne noise is one of the significant noise contributors including the aeroacoustic noise due to intake and exhaust and the re-radiation due to structure-borne noise. Excitation forces by engine operations are evaluated taking into account the power generation mechanism from the burning process to the subsequence motion of internal parts; piston, connecting rod, and crank shaft. The acoustic transfer vector method is incorporated to effectively simulate the radiated noise field under the various operation conditions. A contribution analysis for the various excitations to the radiated noise is conducted. It is found that the firing pressure is the main source of the radiated noise, and so the structure of the cylinder can be modified to significantly reduce the radiated noise from the engine block.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.1455-1459
• /
• 2006

우리나라 수자원 관리에서 여름 유량은 이수 및 치수 측면에서 매우 중요한 역할을 한다. 이러한 점에서 여름유량의 예측 가능성을 검토하는 것은 수자원 관리에 유연성을 주는 동시에 상대적으로 위험도를 저감시킬 수 있는 역할을 할 수 있다. 따라서 본 연구의 목적은 여름 계절 유량을 대상으로 기상인자와의 상관성 분석을 통해 유량 예측을 위한 수문기상정보(hydroclimatics)를 전 지구적으로 검토하고 최종적으로 불확실성을 고려할 수 있는 Ensemble예측을 실시하고자 한다. Ensemble예측은 설정 가능한 입력 자료를 통하여 다수의 출력자료를 얻는 방법론으로서 불확실성이 큰 기상 및 수문기상자료 분석에 주로 이용되고 있다. 본 연구에서는 해수면온도(sea surface temperature), 해수면기압(sea level pressure)과 방출장파복사에너지(outgoing longwave radiation)를 주요 기상인자로 고려하였으며 예측모형으로서는 Cross Ensemble(out of bagging)방법에 근거한 Support Vector Machine 모형을 이용하였다. 분석결과 주요 기상인자와 50%이상의 상관관계를 보이고 있으며 다소 합리적인 예측 결과를 제시하여 주고 있어 수자원관리를 위한 보조수단으로 이용이 가능할 것으로 사료된다.

• 한국연소학회지
• /
• 제4권1호
• /
• pp.59-65
• /
• 1999

Ignition of $NH_3-O_2-Ar$ mixtures have been studied behind reflected shock waves over the temperature range of 1600-2300 K and the pressures in the range of 1.1-1.6 atm. The pressure profile and the radiation emitted behind the shock waves have been monitored to give empirical correlations between ignition delay times and the mixture concentrations with the experimental conditions. On the basis of this data, several kinetic mechanisms proposed for ammonia oxidation at high temperatures have been tested. The ignition delay times obtained from the mechanism proposed by Miller and Smook were in good agreement with our experimental results.