• 한국환경과학회지
• /
• 제8권3호
• /
• pp.293-297
• /
• 1999

Based on the monthly weather report of Korea Meteorological Administration (KMA) and daily sea surface temperature (SST) in Incheon harbor of National Fisheries Research and Development Institute, heat budget in Incheon coastal area was estimated. The temperature differences between the sea surface and near bottom were nearly within 1$^{\circ}C$. This indicate the mixing from the sea surface and the bottom. The net heat flux through the sea surface and the advection through the inner and outer bay was affected uniformly to the water body in Incheon coastal area. The net heat flux was about 110W/$m^2$ in maximum value on May, about -80W/$m^2$ in minimum on January. The net heat flux through the sea surface from the solar radiation was about 2.35$\times$${10}^5$W during the year. This heat flux flew out the bay through the advection by the same flux.

• 대한설비공학회지:설비저널
• /
• 제16권2호
• /
• pp.194-203
• /
• 1987

A numerical study has been conducted on the combined radiation-natural convection heat transfer characteristics in a square cavity with a selectively transparent wall. The fluid in the cavity is assumed to be transparent to the thermal radiation. The effect of the wall emissivity is mainly considered in view of the temperature and flow fields. The comparison of the radiative heat flux and conductive heat flux variations along the isothermal wall is presented as well. The results show that the Nusselt number distribution is fairly uniform due to the com-pensative interaction of the radiation and convection heat transfer.

• 한국환경과학회지
• /
• 제16권2호
• /
• pp.233-239
• /
• 2007

In the coastal wetland the mud is consist of fine particles, which means that it is characterized by small gap, and heat transfer is obstructed since moisture is found between the gaps. The relationship between net radiation ($R_N$) and soil heat flux($H_G$) shows a counterclockwise hysteresis cycle, which refer to a time lag behind in the maximal soil heat fluxes. The albedo is independent of seasonal variation of the vegetation canopy which plays very important roles to store and control the heat in the atmospheric surface layer.

• 대한기계학회논문집B
• /
• 제26권11호
• /
• pp.1503-1512
• /
• 2002

From the view of the environmental protection against the use of fossil fuels, a great of efforts have been exerted to find an alternative energy source. Hydrogen may become an alternative However the product species of the hydrogen flame is only $H_2O$, which emits only non-luminous radiation so the radiation from it is much smaller than that for a hydrocarbon flame. In this study, the authors designed and fabricated a laboratory scale test furnace to study thermal characteristics of hydrogen-air diffusion flame. In addition. the effects of addition of reacting as welt as non-reacting solid particles were experimentally investigated. Among the total heat flux to the wall, about 75 % was occupied by radiation while 25% by convection. When the aluminum oxide (Al$_2$O$_3$) particles were added, the radiative heat flux was reduced due to heat blockage effects. On the other hand, the total as well as the radiative heat flux was increased when the carbon particles were seeded, since the overall temperature increased. The effects of swirl and excess air ratio were also examined.

• 한국환경과학회지
• /
• 제9권2호
• /
• pp.109-114
• /
• 2000

The purpose of the present study is to develope the estimation scheme for sensible heat flux by semi-empirical approach using routine meteorological data such as solar radiation and air temperature. To compare observed sensible heat flux with estimated sensible heat flux, the sensible heat fluxes were measured by three dimensional sonic anemometer-thermometer. The field observation was performed during 1 year from December 1, 1995 to November 30, 1996 on a rice paddy field in Chunchon basin. The heat fluxes were measured at a heights of 5m and mean meteorological variables were obtained at two levels, 2.5m(or 1.5m) and 10m. Since condition of rice paddy field such as, wetness of the field, roughness length, vary widely, we devided annual data to 5 periods. Comparing with two sensible heat fluxes, the results showed that the correlation coefficients were more than 0.86. Thus, we can conclude that the estimation method of sensible heat fluxes using routine meteorological data is practical and reliable enough.

• 한국지구과학회지
• /
• 제25권2호
• /
• pp.87-93
• /
• 2004

구름이 평지위의 난류속의 변화에 미치는 영향을 연구하기 위하여 스페인 빌라프리아 공항에 설치된 9 m 기상관측탑에서 얻은 역학 및 열역학 자료를 경도법으로 분석하였다. 일몰에 따른 표면 냉각은 표층 풍속을 감소시켰다. 현열속과 운동량속은 열역학적 인자 보다는 역학적 인자에 따라 증가하였고, 현열속은 열적인 조건에 영향을 받지 않았다. 구름이 존재하는 경우 전천일사량이 현열속 변화를 주도하지 못했고 대기 표층은 오히려 바람의 강도에 영향을 받았다.

• 한국해양학회지
• /
• 제30권2호
• /
• pp.91-115
• /
• 1995

동해에서의 해양-대기 열교환량을 1961년부터 1990년까지의 선상관측자료와 1976 년부터 1985년까지의 일본기상처 부표자료를 이용하여 구하였다. 그리고 이 결과와 해 양상층부 200m 내의 열용량의 계절변화로부터 해양내부의 열유동량을 계산하였다. 겨 울에는 유입되는 단과복사량과 방출되는 장파오복사량의 크기가 비슷해 복사에 의한 열방출량은 적지만 열속과 자멸속이 강하여 전 해역에서 대기로 많은 열량을 방출한 다. 유효열방출량의 공간적인 변화폭은 100 Wm/SUP -2/이상이며, 최대의 열방출량은 쓰가루해협 부근에서 일어나고 대한해협과 울릉분지역등 남부역이 높은 방출량이 나타 난다. 특히 남서 해역의 강한 열방출이 겨울에 동해 중층균실수의 형성에 영향을 주는 것으로 보인다. 여름에는 강한 태양복사와 낮은 난류속의 영향으로 전해역에서 120~ 140 Wm/SUP -2/의 비슷한 크기로 해양이 가열된다. 해양내부의 열유동은 일본연안에서 양의 값을 나타내 여름의 강한 대마난류에 의한 열량의 유입을 보이며, 그 크기는 해 면을 통해 흡수한 열량보다 커서 여름에는 대마난류에 의한 열유입이 중요함을 보여준 다. 한국연안에서는 음의 값으로 수온이 낮은 북한 한류계수의 남하를 나타낸다. 봄과 가을은 3월과 100월에 각각 최소, 최대를 나타낸다. 유효열교환량의 연변화폭은 남서 해역의 경우 약 580 Wm/SUP -2/이다. 해표면을 통한 연평균 유효열교환량은 모든 해역 에서 음의 값으로 대기중으로 열량을 방출하며, 그 크기는 쓰가루해협부근에서 -130 Wm/SUP -2/로 강하고 대한해협과 울릉분지역에서도 이웃하는 해역보다 많은 열량을 방 출한다. 위도 35$^{\circ}$~39$^{\circ}$N 사이에서의 공간적인 연평균값의 크기는 단파복사량, 자멸 속, 장파복사, 열속의 크기로 각각 129, -90, -58, -32Wm/SUP -2/으로 유효열교환량은 -51W/SUP -2이다.

• 대기
• /
• 제18권4호
• /
• pp.429-439
• /
• 2008

The lower-stratospheric polar temperature in winter and spring for both hemispheres is investigated based on the NCEP/NCAR 50-year reanalysis data with respect to the strength of the stratospheric eddy heat flux. Both the polar temperature and the eddy heat flux show significant variation on the decadal and year-to-year time scales except during the Southern Hemisphere winter. The year-to-year variation in the polar temperature is mainly determined by the eddy heat flux convergence. The eddy heat flux convergence is compared with the diabatic heating rate obtained from a two-dimensional model. Radiative heating caused by absorption of solar radiation is comparable to the heating caused by the eddy heat flux convergence in the Southern Hemisphere. The effect of ozone depletion on diabatic heating has been found to be secondary in the Northern Hemisphere, even in March 1997 when the record depletion of ozone took place.

• 한국군사과학기술학회지
• /
• 제25권4호
• /
• pp.355-363
• /
• 2022

Development of supersonic flying vehicle is one of the most latest issue in modern military technology. Specifically, structural integrity of supersonic flying vehicle can be verified by high temperature structural test. High temperature structural test is required to consider thermal load caused by aerodynamic heating while applying structural load simultaneously. Tubular quartz lamps are generally used to generate thermal load by emitting infrared radiation. In this study, modified heat flux model of tubular quartz lamp is proposed based on existing model. Parameters of the proposed model are optimized upon measured heat flux in three dimensions. Finally, thermal load of plate specimen is designed by the heat flux model. In conclusion, it is possible to predict heat flux applied on plate specimen and desired thermal load of high temperature structural test can be obtained.

• 한국태양에너지학회 논문집
• /
• 제35권3호
• /
• pp.65-71
• /
• 2015

A solar thermal simulator is suitable for indoor experiments of solar receivers and reactors when solar insolation and weather conditions are not favorable. Moreover, due to the easy control of electric power input, the solar thermal simulator allows the adjustment of power input incident on solar receivers and reactors and thus the implementation of accurate experiments. We manufactured a solar simulator, which is comprised of three sets of a xenon lamp and an elliptical reflector. In order to serve as a test facility, optical characterization of the solar simulator via radiation heat flux measurement is a critical prerequisite. We applied the flux mapping method to measuring the heat flux distribution of the three lamps. We presented the measurement results in terms of the heat flux distribution, the peak heat flux, the power distribution, the maximum power, and the efficiency for electric power conversion into radiation power. Characterization results show that our solar simulator provides the peak heat flux of $3,019kW/m^2$, the maximum power of 16.9 kW, and the conversion efficiency of 45%, additionally with a 10% operation margin for output increase.