• Radiation Oncology Journal
• /
• 제4권2호
• /
• pp.173-177
• /
• 1986

온열요법이 암환자치료에 있어 온열요법 단독 또는 방사선치료나 일부 항암화학요법제와 병행할 때 그 효과가 상승되고 있음은 최근 잘 알려진 사실이다. 가톨릭의대부속 강남성모병원 방사선치료실에서는 온열요법의 동물실험과 더 나아가 임상응용을 목적으로 가정용 전자레인지를 개조하여 극초단파유도관을 제작, 부착시킴으로서, 실험 및 종양부위에 2,450MHz 극초단파를 조사할 수 있는 장치를 제작하였다. 아울러 이 온열치료장치가 온열치료기로서의 적합성을 알아보기 위하여 본 실험을 실시하였다. 실험을 위한 phantom으로, 고기덩어리와 한천을 이용하였으며, 마우스하지에 발생시킨 Sarcom-180고형종양을 또한 이용하여, 이 온열치료기의 전압변동에 따른 온도분포 변화를 측정하였다. 한편 실험동물종양에서는 종양조직내 온도가 주위 정상조직보다 $1\~3^{\circ}C$ 높은 것을 확인할 수 있었다.

• Journal of Radiation Protection and Research
• /
• 제23권1호
• /
• pp.17-23
• /
• 1998

자주달개비 4430 클론에 있어서 $^{252}Cf$ 중성자에 의해 유발되는 유전자 돌연변이의 선량반응 관계를 확립함과 동시에 TSH 분홍돌연변이를 유발함에 있어서 X-선에 대비한 중성자의 생물학적 효과비를 산출하였다. 돌연변이의 분석은 공시재료의 방사선조사 후 4주 이상 이뤄졌으며 최대변이율을 보이는 조사후 6일부터 13일까지의 분석결과로부터 돌연변이빈도를 산출하였다 가용한 실험범위 내에서 중성자 선량의 증가에 따라 돌연변이빈도의 선형적 증가 양상을 나타내었다. X-선에 비교하여 산출한 중성자의 RBE값은 3.1에서 6.8의 범위를 보였으며 이러한 값은 일반적으로 인지되고 있는 중성자의 RBE값에 비해 상당히 낮은 값이다.

• 한국항공우주학회지
• /
• 제47권2호
• /
• pp.122-129
• /
• 2019

액체로켓 연소실 내부 벽면에서의 열전달은 대류, 복사 및 전도를 모두 고려해야 하기 때문에, 정확한 열전달량을 예측하기에는 어려움이 있다. 이에 현재 주로 상용 해석 프로그램을 사용할 경우가 많은데, 이 경우에는 복잡한 입력 작업과 상당한 계산 시간이 소요된다는 문제가 있다. 따라서 본 연구에서는 초기 기초 설계 단계에서 간편하게 사용할 수 있는 1차원 열 해석 기법을 정립하였으며, 정립된 1차원 열 해석기법을 통해 본 연구실에서 개발한 스팀제너레이터의 연소실 냉각채널을 설계하였다. 연소 실험 결과, 1차원 열 해석 기법을 통해 예측된 냉각수의 온도 증가량은 실험결과와 약 8.5%의 차이를 보임을 확인하였다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제42권3호
• /
• pp.223-229
• /
• 2019

In order to reduce the radiation exposure dose of the patient and to obtain accurate diagnosis results, the quality control of the diagnostic radiation generator must be conducted periodically In particular, bone density test equipment could be influenced by many factors, and it is far more important because inaccurate measurement would eventually affect the result value. However, the cross-correction phantom of DXA equipment is poorly penetrated due to lack of awareness of the industry and the high cost. Therefore, this study developed a BMD phantom using a 3D printer and Korean BMD phantom with low cost by cross analyzing Korean BMD value from The Korean National Health and Nutrition Examination Survey and evaluated it. The L1, L2, and L3 BMD values of phantoms produced with the 3D printer were measured to be $0.887{\pm}0.006g/cm^2$, $0.927{\pm}0.006g/cm^2$, and $0.960{\pm}0.005g/cm^2$, at 215 mm height and $0.882{\pm}0.011g/cm^2$, $0.914{\pm}0.005g/cm^2$, $0.933{\pm}0.008g/cm^2$ at 155 mm height displaying statistically significant relevance. The result suggests that a proper quality control and cross calibration of DXA device be possible and expected to be an essential data for various medical phantom manufacture development using 3D printer.

• 대한방사선기술학회지:방사선기술과학
• /
• 제45권3호
• /
• pp.255-262
• /
• 2022

In this study, by analyzing the examination time for each procedure, the appropriate workload of radiologic technologist is analyzed based on the actual examination time in the current clinical setting by comparing with the examination time in the radiology field setting of the health insurance review and assessment service. In addition, this result is introduced into the calculation of relate value units; it was attempted to provide accurate and objective evidence in the field of radiology. From May 2020 to December 2021, the study retrospectively investigated the examination times recorded in the electronic medical record and picture archiving and communication system at 5 tertiary general hospitals and 1 general hospital. The total of 16 examination parts are applied in this study, including the head, sinuses, chest, ribs, abdomen, pelvis, cervical, thoracic, lumbar, shoulder, elbow, wrist, hip, femur, knee, and ankle. The minimum number of images that could be obtained per radiation generator was 3.6 images for one hour, and the maximum was 6.4 images. When 50% median of procedure time is calculated, the minimum number of images that could be obtained was 16.7 images and maximum was 35.3 images; in addition, minimum examination time is 1.7 minutes, and maximum time is 3.6 minutes. In conclusion, it is judged that there will be insufficient explanation time for basic infection instructions such as hand hygiene during the examinations in current clinical practice. It is believed that radiologic technologists will contribute to providing higher-quality of radiation examination services to the public by complying with guidelines for work and setting appropriate workload on their own.

• 한국전자파학회논문지
• /
• 제19권11호
• /
• pp.1185-1192
• /
• 2008

본 논문에서는 고전압 스위치와 팻 다이폴 안테나로 구성되는 광대역 LC 오실레이터를 설계 및 제작하고 방사 특성에 관해 분석하였다. 제안된 광대역 LC 오실레이터는 Marx generator를 고전압 펄스 전원 장치로 사용하며 지향성을 높이기 위해 $90^{\circ}$ 코너 리플렉터를 사용한다. 시뮬레이션 및 측정 파형을 분석한 결과, 팻 다이폴을 연결하지 않은 고전압 스위치는 수신 전력을 기준으로 약 9%(${\lambda}_1=0.7\;m$)의 3 dB 대역폭을 가지며, 고전압 스위치와 팻 다이폴 안테나로 구성되는 LC 오실레이터는 약 30%(${\lambda}_2=1\;m$)의 대역폭을 가진다. 결과적으로 팻 다이폴 안테나가 방사 전력뿐만 아니라 동작 주파수 및 대역폭에 영향을 미치는 것을 확인할 수 있었다. 본 논문의 연구 내용은 고전압 스위치와 팻 다이폴 안테나로 구성되는 광대역 LC 오실레이터 설계 시 동작 주파수와 방사 전력을 결정하는데 있어서 매우 유용할 것으로 판단된다.

• 대한핵의학회지
• /
• 제3권1호
• /
• pp.73-82
• /
• 1969

The newly developed diagnostic method with application of $^{113}Sn-^{113m}In$ cow system ($^{113}Sn:\;T\frac{1}{2}$ 118 days, $^{113m}In:\;T\frac{1}{2}$ 1.7 hrs, 390 Kev, Single ${\gamma}$) has the remarkable advantages such as increased diagnostic ability by single large dose administration of $^{113m}In$ with no subsequent radiation hazard and shortened examining time. We reformed the research of following scope with the use of developed $^{113}Sn-^{113m}In$ cow (25 mCi) generator: The sizes of particles produced under various conditions were investigated, and possibility for application to the scannings of various organs such as brain, liver, lung, bone marrow and blood pool etc. were studied. Results: $^{113m}InCl_3$ solution eluted from diluted HCl solution (pH 1.5) passed through $^{113}Sn-^{113m}In$ generator, and there can be produced various sized particles of colloidal indium. And there observed the state of distribution of $^{113m}In$ in each organ which showed many differences according to the particle sizes of colloidal indium. The results are stated as follows: 1. The adjustment of pH is the most important factor in making the desirable particle size of colloidal indium. The colloid for blood pool showed the highest level as 7.1%/gm blood, at pH 1.7, the colloid of pH 3.5 for liver scanning showed the highest level, 88.4%, in the liver, the colloid pH 6 showed the highest level, 3.1%, in the spleen, and the colloid of pH 11.0 showed the highest level, 85.3%/gm, in the lung. 2. The colloid for liver scanning made with NaCl-NaOH system showed the highest liver uptake at pH 7.2, and at either higher or lower pH than 7.2 showed decrease of liver uptake more or less. 3. The activity of $^{113m}In$ eluted through $^{113}Sn-^{113m}In$ generator indicated over 90% in the initial 4 ml, and particularly 88.1%-86.0% in the initial 2 ml. 4. The incubation time, tempertaure and mechanical irritation related to colloid formation and coating of colloid were not the definite condition of influence.

• 시스템엔지니어링학술지
• /
• 제12권1호
• /
• pp.89-103
• /
• 2016

Due to safety of the plant, it became very clear the importance of study occurrence reactor coolant system (RCS) issues specially the primary water stress corrosion cracking (PWSCC). The Systems Engineering (SE) approach is characterized by the application of a structured engineering methodology for the design of a complex system or component. Robotic devices have been used for internal inspection, maintenance and performing remote welding and inspection in high-radiation areas. In this paper, PWSCC overview and inlay and over lay welding methodology introduced, concept of robotic device that can be inserted into the piping via Steam Generator (SG) main way to access to primary piping of pressurized water reactor (PWR) is developed based on SE methodology. A 3D model of the inspection system was developed along with the APR1400 (Advanced Power Reactor)reactor coolant systems (RCS) and internals with virtual 3D simulation of the operation for visualization to prove the validity of the concept.

• 전기학회논문지
• /
• 제64권2호
• /
• pp.222-227
• /
• 2015

This paper presents the optimal energy generation systems for economical EVs(Electric Vehicles) charging stations located in an island area. The system includes grid electricity, diesel generator and renewable energy sources of wind turbines and PV(Photovoltaic) panels. The independent generation system is designed with data resources such as annual average wind speed, solar radiation and the grid electricity price by calculating system cost under different structures. This sensitive analysis on the varying data resources allows for the configuration of the most economical generation system for charging stations by comparing initial capital, operating cost, NPC(Net Present Cost) and COE(Cost of Energy). Depending on the increase of the grid cost, the NPC variation of the most economical system which includes renewable energy generations and grid electricity can be smaller than those of other generation systems.

• Journal of Mechanical Science and Technology
• /
• 제17권9호
• /
• pp.1380-1387
• /
• 2003

When a cold HPSI (High pressure Safety Injection) fluid associated with an overcooling transient, such as SGTR (Steam Generator Tube Rupture), MSLB (Main Steam Line Break) etc., enters the cold legs of a stagnated primary coolant loop, thermal stratification phenomena will arise due to incomplete mixing. If the stratified flow enters the downcomer of the reactor pressure vessel, severe thermal stresses are created in a radiation embrittled vessel wall by local overcooling. As general thermal-hydraulic system analysis codes cannot properly predict the thermal stratification phenomena, RG 1.154 requires that a detailed thermal-mixing analysis of PTS (pressurized Thermal Shock) evaluation be performed. Also. previous PTS studies have assumed that the thermal stratification phenomena generated in the stagnated loop side of a partially stagnated primary coolant loop are neutralized in the vessel downcomer by the strong flow from the unstagnated loop. On the basis of these reasons, this paper focuses on the development of a 3-dimensional thermal-mixing analysis model using PHOENICS code which can be applied to both partial and total loop stagnated cases. In addition, this paper verifies the fact that, for partial loop stagnated cases, the cold plume generated in the vessel downcomer due to the thermal stratification phenomena of the stagnated loop is almost neutralized by the strong flow of the unstagnated loop but is not fully eliminated.