• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2044-2049
• /
• 2007

In order to predict the thermal radiation induced from alumina particle cloud in the plume of solid propellant motor, view factor method is applied to space shuttle SRB and the result is compared with that of monte carlo method. For this purpose, radiative characteristics, such as particle cloud temperature distribution, effective emissivity or emissive power of particle cloud are studied. In the case of effective emissivity, inverse wavelength method is applied and plume reduction characteristic length is used for emissive power distribution. As a result, thermal radiation using view factor method gives more conservative results than that using monte carlo method. So it can be used for preliminary design of thermal protection system.

• 한국전산유체공학회지
• /
• 제19권1호
• /
• pp.1-6
• /
• 2014

Since experiments on the actual operational status are said to be very impractical because of their economic and repeatability problems, it is difficult to understand the thermal profiles of aerospace or military equipments. Thus, the CFD codes with considering the radiation heat transfer are used to compensate the defect. In case, analyzing the radiation exchanges between the object surfaces are very important. Because the temperature and the IR signal distributions of the object surface are significantly affected by the radiative heat transfer. To achieve accurate thermal radiation exchange between surfaces, it is important to calculate the radiation view factor precisely. Finer subdivision of meshes can be used to increase the accuracy of radiation view factor, but if the mesh is subdivided infinitely, the time required for calculation increases significantly and thus decreasing the efficiency. If the subdivision is not sufficient, assurance of accuracy is not guaranteed. In this paper, optimal mesh subdivision method using the solid angle has been successfully tested and found to be useful in increasing the efficiency of calculating the shape factors.

• 대한기계학회논문집B
• /
• 제22권7호
• /
• pp.905-914
• /
• 1998

View factor determination is very important in thermal analysis problems with surface radiation but it is very difficult to determine view factors for complex geometries. Exact calculation of view factors for crystal growth furnace is essential due to not only its high surface temperature but the radiation shield, complicated heating system. In this study, view factor calculation algorithm is introduced and applied to cylindrical crystal growth furnace. This algorithm is based on the Hemi-Cube Algorithm and the results obtained with this algorithm show good agreements with those of analytical solution. As an application of this algorithm, temperature profiles and heating value distributions for various furnaces are calculated and the shape criteria for better furnace are suggested.

• 한국주거학회논문집
• /
• 제11권4호
• /
• pp.77-84
• /
• 2000

The purpose of this paper is to find a visible project area for an average six year old Korean child in radiant enclosures having standing pose. The results using this method will be necessary to find effective radiation area, effective radiation area factor, form factor, and mean radiant temperature for an average six years old Korean child consists of 3012 triangles. The methods to find visible project area of an average six years old Korean at arbitrary view point will be presented. The visible project area for Korean child is needed for evaluating thermal comfort for six years old Korean child. The biggest visible project area of an average six years old Korean is $\textrm{cm}^2$$2.061.0\textrm{cm}^2$ at the view point of alfa 0.0 degree and beta 0.0 degree, and the smallest visible real area of an average six years old Korean is $567.1\textrm{cm}^2$ at the view point of alfa 15.0 degree and beta 90.0 degree.

• 대기
• /
• 제29권5호
• /
• pp.537-550
• /
• 2019

To analyze the observation environment of solar radiation stations operated by the Korea Meteorological Administration (KMA), we analyzed the skyline, Sky View Factor (SVF), and solar radiation due to the surrounding topography and artificial structures using a Digital Elevation Model (DEM), 3D camera, and solar radiation model. Solar energy shielding of 25 km around the station was analyzed using 10 m resolution DEM data and the skyline elevation and SVF were analyzed by the surrounding environment using the image captured by the 3D camera. The solar radiation model was used to assess the contribution of the environment to solar radiation. Because the skyline elevation retrieved from the DEM is different from the actual environment, it is compared with the results obtained from the 3D camera. From the skyline and SVF calculations, it was observed that some stations were shielded by the surrounding environment at sunrise and sunset. The topographic effect of 3D camera is therefore more than 20 times higher than that of DEM throughout the year for monthly accumulated solar radiation. Due to relatively low solar radiation in winter, the solar radiation shielding is large in winter. Also, for the annual accumulated solar radiation, the difference of the global solar radiation calculated using the 3D camera was 176.70 MJ (solar radiation with 7 days; suppose daily accumulated solar radiation 26 MJ) on an average and a maximum of 439.90 MJ (solar radiation with 17.5 days).

• 한국항공우주학회지
• /
• 제45권8호
• /
• pp.678-685
• /
• 2017

지구관측위성에 탑재되는 자료처리/저장장치 방열판은 장비의 주기적인 고발열, 배치, 장착성 등 설계 특성으로 인해 쉴드가 장착된 홈 형태를 갖는다. 홈 형태 방열판의 영향성과 쉴드 방열판의 열성능을 확인하기 위해, 평판 방열판을 기준으로 홈 형태의 방열판과 쉴드 방열판을 비교하여 열진공 시험을 실시하였다. 시험결과를 바탕으로 view factor에 의한 열교환과 방열판의 온도를 이론해석적으로 분석하여 열 설계 성능비교의 타당성을 입증하였다.

• 한국항공우주학회지
• /
• 제43권12호
• /
• pp.1079-1088
• /
• 2015

본 연구는 한국항공우주연구원에서 개발한 위성종합설계 SW 내의 복사계수 계산 프로그램의 병렬화 및 성능향상에 대해 논의한다. 복사계수는 복사열전달이 포함된 인공위성의 열해석을 수행하기 위한 필수적인 전초 단계로서 그 자체적인 계산량 또한 상당하다. 특히 위성 궤도상 시간에 따라 태양전지판과 본체의 상대변위가 변하기에 시간 별 독립적인 복사계수의 계산이 필요하다. 본 논문은 복사형상계수 병렬화 방법과 그 성능, KD-Tree 기반 차폐 탐색 알고리즘 및 태양전지판과 본체의 상대변위 변화에 따른 부분 복사형상계수 행렬 갱신이라고 지칭하는 계산량 저감 기법에 대해 논한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.278-283
• /
• 2003

Analysis has been carried out to investigate the temperature variation and the uniformity of the temperature distribution of the glass panel by infrared radiant heating. Halogen lamps are used to heat the panel and located near the top and bottom of the rectangular chamber. The thermal energy is transfered only by radiation and the radiation exchange occurs only on the solid surfaces and is considered by using the view factor. The results show that the uniformity of the temperature distribution of the panel is improved but the time for heating increases as the wall reflectivity is large. The temperature difference reaches a maximum in the early stage of the heating process and then decreases until it reaches the uniform steady-state value.

• 한국의학물리학회지:의학물리
• /
• 제28권4호
• /
• pp.190-196
• /
• 2017

For the $ViewRay^{(R)}$ system (ViewRay Inc., Cleveland, OH, USA) which is representative of magnetic resonance (MR) guided radiotherapy machine, it is important to evaluate effectiveness of AAPM's TG-51 protocol and the effect of the magnetic field on absolute dosimetry. In order to measure the absolute dose, MR-compatible chamber and water phantom system manufactured in this study were used. The materials of the water phantom system were plastic of polymethyl methacrylate (PMMA) and non-ferrous materials. Due to the inherent feature of the $ViewRay^{(R)}$, all Co-60 sources are not located at gantry angle of $0^{\circ}$ while being located at gantry angle of $90^{\circ}$. For this reason, absolute dosimetry was performed based on the measurements in solid water phantom (SWP) and water which determine the SWP to water correction factor. For evaluation of output constancy with gantry angle, measurements were made with ionization chamber inserted in cylindrical water-equivalent phantom. For measured doses in water, the values of dose deviation according to a reference dose of 200 cGy for Head 1, Head 2 and Head 3 were -0.27%, -0.45% and -0.22%, respectively. For measured doses in SWP, the values of dose deviation according to a reference dose of 200 cGy for Head 1, Head 2 and Head 3 were -1.91%, -2.07% and -1.84%, respectively. All values of dose measured in SWP tended to be less than those measured in water by -1.63%. With the reference gantry angles of $0^{\circ}$ and $90^{\circ}$, the maximum values of deviation for Head 1, Head 2 and Head 3 were 0.48%, 1.06% and 0.40%, respectively. The measurement agreement is within the range of results obtainable for conventional treatment machines. The low strength of the magnetic field does not affect dose measurements. Using the SWP to water correction factor, absolute doses for $ViewRay^{(R)}$ system can be measured.

• 설비공학논문집
• /
• 제11권6호
• /
• pp.709-715
• /
• 1999

To optimize a heating and cooling system, we need an exact solution lot radiant heat transfer in any form of room or building. This paper describes the solution method of view factor by the area weighted average and graphical method to calculate the radiant heat exchange or daylighting level in any form of room or building. This study shows that the area weighted average and graphical methods have many points of merits(calculation speed, correctness and calculation capability in an arbitrary form of room shapes etc.) compared with existing methods