• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.811-816
• /
• 2000

It has been long suspected that the transition region may give rise to local pressure fluctuations and radiated sound that are different from those created by the fully-developed turbulent boundary layer at equivalent Reynolds number. Experimental investigation described in this paper concerns the characteristics of pressure fluctuations at the transition. Flush-mounted microphones and hot wires are used to measure the pressure fluctuations and local flow velocities within the boudary layer in the low noise wind tunnel. From this experimental we could observe the spatial and temporal development process of T-S wave using Wigner-Ville method and found the possibility of relation between the characteristic frequency of T-S wave and free stream velocity and the boundary layer thickness based on nondimensional pressure spectra scaled on outer variables.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.611-618
• /
• 2000

The test facility of the 1/60-scale models for the train-tunnel interactions was recently developed to investigate the effects of entry portal shapes, hood shapes and air-shafts for reducing the micro-pressure waves radiating to the surroundings of the tunnel exits by KRRI in Korea. The launching system of train model was chosen as air-gun type. In present test rig, after train model is launched, the blast wave by the driver did not enter to inside of the tunnel model. The train model is guided on the one-wire system from air-gun driver to the brake parts of test facility end. Some cases of the experiments were compared with numerical simulations to prove the test facility.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.619-624
• /
• 2000

The purpose of present study is to investigate for reducing micro pressure waves generated according to train speeds $(240km/h{\sim}380km/h)$ through tunnels with countermeasures as followings; the hood configuration in tunnel entrance. We developed hoods for tunnel of 0.5 km length in the condition of tunnel cross-section area of $107m^2$ on the slab track. According to the results the maximum micro-pressure wave is reduced by 41.2% for the slit hood installed at the entrance of the tunnel and reduced by 47.7% for the slit hood installed at the entrance of the tunnel and the $45^{\circ}$ slanted portal at the exit of the tunnel

• 대한조선학회지
• /
• 제20권2호
• /
• pp.37-42
• /
• 1983

This paper presents a procedure within the framework of linear potential theory for predicting the lateral drifting forces on a cylinder floating on the free surface of a finite depth water. The disturbance of a regular incident wave caused by the presence of the floating body is represented by the sum of the diffracted and radiated wave potentials, which are determined by using Green's theorem. The lateral drifting forces are calculated by use of momentum theorem, and the scattered waves are expressed in their asymptotic forms. The computed lateral drifting forces on a Lewis form cylinder(b/T=1.25, $\sigma$=0.95) for water depth to draft ratio of 5.0 are compared with the Kyozuka's experimental results for a deep water, and found to be in good agreement. The water depth effects on drifting forces of the same model are also calculated.

• ETRI Journal
• /
• 제40권1호
• /
• pp.89-100
• /
• 2018

Millimeter wave communication is one of the main disruptive technologies in upcoming 5G mobile networks. One of the first candidate applications, which will be commercially ready by 2020, is wireless backhaul links or wireless last mile communication. This paper provides an analysis of this use-case from radio engineering and implementation perspectives. Furthermore, preliminary experimental results are shown for a proof-of-concept wireless backhaul solution developed within the EU-KR 5GCHAMPION project, which will be showcased during the 2018 Winter Olympic Games in Korea. In this paper, we verify system level calculations and a theoretical link budget analysis with conductive and radiated over-the-air measurements. The results indicate that the implemented radio solution is able to achieve the target key performance indicator, namely, a 2.5 Gbps data rate on average, over a range of up to 200 m.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.121-125
• /
• 2003

Micromixer plays an important role in Bio-MEMS or ${\mu}-TAS$. Mixing is generally generated by turbulence and interdiffusion of two fluids. Because of low Reynolds number(Re << 2000) in ${\mu}-channel$, it is difficult to generate turbulence, so mixing mainly depends on interdiffusion. Thus long channel distance is required to mix two different fluids. To reduce the channel length required for mixing, we propose the a new active ${\mu}-mixer$ that two fluids are effectively mixed in ${\mu}-channel$ by the ultrasonic wave which is generated by PZT. The ultrasonic wave is radiated into a chamber in the cross-section directional direction to interface with the two fluids. The two fluids are positioned one on top of the other. Mixing state is measured by the changing of color due to the reaction of NaOH and phenolphtalein.

• 센서학회지
• /
• 제25권1호
• /
• pp.46-50
• /
• 2016

During KSTAR plasma experiments, torsional $Alfv\acute{e}n$ waves in the frequency of few GHz or below were detected. To understand this plasma waves during the crash of MHD instabilities, an RF spectrometer has been developed for detection of the radiated RF signals in the KSTAR Tokamak. It has the capability of broadband RF spectral measurement (50 ~ 400 MHz). To detect the broadband RF signals which are radiated from the KSTAR systems, a broadband antenna is the key feature of the RF spectrometer. In this paper, a broadband bowtie antenna for detection of $Alfv\acute{e}n$-waves in the KSTAR Tokamak is presented. Planar-type bowtie antenna is designed and fabricated on an FR4 substrate with thickness of 1.6 mm. The antenna consists of bowtie shaped balanced radiators and broadband planar balun. The antenna is designed to have an input impedance of 50 Ohm, and a taper-shaped balun is adopted for field and impedance matching between 50 Ohm transmission line to 110 Ohm feeding network of balanced radiators. The implemented antenna provides around -3 to 3 dBi of gain for the whole frequency band. The VSWR of the bowtie antenna is less than 12:1 over the frequency bandwidth of 50 to 2000 MHz.

• 비파괴검사학회지
• /
• 제24권1호
• /
• pp.1-7
• /
• 2004

[ $1.71{\mu}m$ ] 범위의 표면 거칠기를 가진 철 시편에 대해 물속에서 후방산란된 초음파의 입사각 의존성(프로파일)이 측정되었다. 거칠기가 도색에 의해 숨겨졌을 때 수직 프로파일은 거칠기에 대한 분별력이 사라졌으나 레일리 각 근처에서의 후방산란 프로파일은 거칠기 의존성을 여전히 보여주었다. 레일리 각에서 직접 복사된 프로파일 세기는 거칠기와 비례하였고 코너에서 반사되어 되돌아오는 표면파로부터의 후방복사의 세기는 거칠기와 반비례하였다. 도색 처리된 시편에서 0.03 파장 이하의 직접 후방복사에서도 선형성이 관찰되었고 주기적 거칠기에 의해 발생한 비정상 저면 다중반사 현상이 사라졌다.

• 대한의용생체공학회:의공학회지
• /
• 제34권2호
• /
• pp.73-79
• /
• 2013

Purpose: The purposes of this study were to measure the dose distribution of Photodynamic therapy(PDT) laser with 635 nm wavelength using GafChromic film. Method & Result: We made each output 300 J by changing mW and sec using the laser beam radiation mode such as C.W(Continuous Wave) mode, Pulse mode and Burst Pulse mode and measured the does at 0 mm and 5 mm of distance from optic fiber catheter end to the film, and at 5 mm distance by changing the angle of the end of the optic fiber catheter as $0^{\circ}$ and $0.5^{\circ}$. The radiated film was scanned and OD(Optical Density) was compared. And two-dimensional isodose curves were obtained and the consistency of shapes was compared. It was confirmed that there was consistency between optic density and the dose radiated on the film when we radiated GafChromic film by changing distance and angle of 300 J output in each radiation mode coordinating mW and sec. Conclusion: In this study, we could identify the stability according to changes in laser beam modes, changes in output according to distance, changes in uniformity according to angle, and beam profiles using GafChromic film, and we could also get two-dimensional isodose curve. It was found that small change in the distance and angle that is made when optic fiber catheter was contacted on the treatment area did not make big effects on the output of beam and the uniformity of dose, and it was also found that GafChromic film could be utilized for the purpose of QA of PDT laser beam.

• 전기전자학회논문지
• /
• 제17권1호
• /
• pp.10-15
• /
• 2013

정상적인 불꽃 점화 시스템과 관통형 세라믹 콘덴서를 부가한 불꽃 점화 시스템에서 복사되는 전자파의 전력 스펙트럼의 측정 데이터를 분석한 결과 관통형 세라믹 콘덴서를 부가한 불꽃 점화 시스템에서 복사되는 전자파는 정상적인 불꽃 점화 시스템에서 복사되는 전자파 보다 약하고, 스펙트럼 밀도 또한 소하였다. 이것은 불꽃 점화 시스템에서 복사되는 불요 전자파를 관통형 세라믹 콘덴서가 감소시키는 것이라고 할 수 있으며, 고압의 펄스를 발생하는 점화 코일은 고주파를 발생하는 무선 주파 발진기라고 할 수 있다.