• 한국연소학회지
• /
• 제5권1호
• /
• pp.91-98
• /
• 2000

We investigated a uniform temperature zone, produced by double flame structure of a co flow CH4/air partially premixed flame, to be used as a temperature calibration source for laser diagnostics. A broadband N2 CARS(coherent anti-Stokes Raman spectroscopy) system with a modeless laser was used for temperature measurement. When the stoichiometric ratio was 1.5, we found the uniform temperature zone in radial direction of the flame of which the averaged temperature was 2110 K with standard deviation 24 K. In the stoichiometric ratio range between 2.0 and 2.5, we found very stable temperature-varying zones in vertical direction at the center of the flame. The size of the zone was approximately 15 mm and it covered a temperature range from 300 K to 1900 K. We also suggest that this zone can be used as a calibration source for 2-D PLIF(planar laser induced flurescence) temperature measurement.

• 대한인간공학회지
• /
• 제27권3호
• /
• pp.33-41
• /
• 2008

The goal of this study was to compare wrist posture, muscular loads and perceived comfort among wearable wrist rest (WR), general wrist rest(GR), no wrist rest(NR) during keyboard and mouse use. Thirteen subjects performed text editing task in three test conditions: wearable wrist rest(WR), general wrist rest(GR), no wrist rest(NR). During text editing task, the right wrist posture was recorded by an electrogoniometer and the muscle activity in upper trapezius, anterior deltoid, extensor digitorum, extensor carpi ulnaris were recorded by electromyography. After all of the tests, the subjects rated perceived comfort. Working with wearable wrist rest(WR), compared to no wrist rest(NR) and general wrist rest(GR), decreased wrist radial/ulnar deviation and also decreased muscle activity in upper trapezius and anterior deltoid. At the same time, in work with wearable wrist rest(WR), the subjects rated more comfort at 5 of 8 body locations(shoulder, upper arm, wrist, hand, body).

• 한국기계가공학회지
• /
• 제18권10호
• /
• pp.75-82
• /
• 2019

Few studies have been conducted regarding theoretical turning force modelling while considering cutting constant. In this paper, a new cutting force modelling technique was suggested which considers the specific cutting force coefficients for turning. The specific cutting force is the multiplication of the cutting force coefficient and uncut chip thickness. This parameter was used for experimental modelling and prediction of theoretical cutting force. These coefficients, which can be obtained by fitting measured average forces in several conditions, were used for the formulation of three theoretical cutting forces for turning. The cutting force mechanism was verified in this research and its results were compared with each of the experimental and theoretical forces. The deviation of force was incurred by a small amount in this model and the predicted force considering feed rate, nose radius, and radial depth shows a physical behavior in main force, normal force, and feeding force, respectively. Therefore, this modelling technique can be used to effectively predict three turning forces with different tool geometries considering cutting force coefficients.

• 한국전자파학회논문지
• /
• 제23권2호
• /
• pp.213-219
• /
• 2012

최근 이동 통신 서비스의 증가로 인해 인류는 다양한 전자파에 동시 노출되어 있다. 그러나 전자파의 인체 영향 연구는 주로 단일 주파수에 대해서 행해졌다. 본 논문에서는 다중 주파수의 전자파를 동시에 노출시킬 수 있는 세포 실험 장치를 제작하였다. 세포 실험 장치는 836.5 MHz 주파수의 CDMA(Code Division Multiple Access) 및 1,950 MHz의 WCDMA(Wideband Code Division Multiple Access) 주파수의 신호를 동시에 발생시킬 수 있도록 광대역 특성을 갖는 radial transmission line 형으로 구성하였다. 변조된 신호는 증폭기, 디지털 감쇄기, RF 결합기를 통하여 원추형 안테나로 전달된다. SAR(Specific Absorption Rate)값은 광학 온도 프로브를 이용하여 petri dish 내 9개 지점에 대하여 3회 측정한 평균값을 이용하여 측정하였다. 측정된 안테나의 반사 손실은 -15dB 이하였고, 단위 입력 전력당 SAR 평균과 표준 편차는 CDMA 주파수에서 $0.105{\pm}0.019$ W/kg, WCDMA 주파수에서 $0.262{\pm}0.055$ W/kg이었다.

• 공업화학
• /
• 제9권6호
• /
• pp.852-856
• /
• 1998

유동층 연소로에서 압력 요동의 통계적 처리 방법을 이용하여 충전물질의 유동층 거동에 대한 영향을 분석하였다. 실험은 내경이 6.7cm인 유동화 장치에서 수행하였고, 실험변수는 입자크기 및 분포, 유동화가스, 유동층의 aspect ratio(L/D), 충전물 등이다. 충전물질은 스크린 충전물질을 사용하였고, 압력 요동 특성은 차압 전달기로 측정하였다. 측정 압력 요동 특성치는 평균값과 표준편차, power spectral밀도 합수의 주진동수 등이다. 압력요동의 표준 편차는 압력 측정 tap의 반경 방향에 거의 영향을 받지 않았으며, 압력 측정 tap의 축방향에서는 충전물이 없는 경우 가스분산판 약 4.5cm 이상에서는 거의 일정하다. 충전물의 크기가 증가할수록 주진동수는 감소하는 경향이 나타났으며, 충전물의 양이 10% 부근에서 주진동수가 가장 큰 변화값을 나타내었다. 압력 요동의 표준 편차는 유동층 연소로의 거동을 해석하고 유동화 현상을 설명하는데 효과적이며, 압력 요동의 특성들은 충전물질에 많은 영향을 받았다.

• 한국항해항만학회지
• /
• 제39권6호
• /
• pp.507-514
• /
• 2015

본 연구는 항만 물류배후단지에 입주하여 운영하는 입주업체들의 효율성을 분석하는 것을 연구의 목적으로 하였다. 인천항과 부산신항 항만 물류배후단지 13개 입주기업을 효율성 분석대상으로 하였으며, 투입변수는 투자액, 면적, 종업원 수를 사용하였고, 산출변수는 물동량과 매출액을 선정하였다. 효율성 분석방법으로는 전통적인 CCR 모형과 BCC 모형을 적용하고 이들의 한계점을 극복하기 위해 초효율성 모형과 Super-SBM 모형을 적용하였다. 초효율성 모형의 분석결과, 평균값은 0.777, 표준편차는 0.541로 나타나 각 기업 간 효율성 점수 차이는 33% 정도 존재하는 것으로 분석되었다. Super-SBM 모형의 분석결과, 평균값은 0.649, 표준편차는 0.489로 초효율성 모형에서 여분을 고려할 경우 기업 간 효율성 점수 평균이 약 13% 정도 감소한 것으로 나타났다. 이러한 감소의 의미는 비방사형 여분이 존재하는 DMU의 효율성 점수하락이 평균 13% 정도 됨을 의미한다. 투입요소의 비효율성 분석결과 면적 -33%, 투자액 -33%에 비해 종업원 수의 비효율성이 -45%로 가장 큰 것으로 분석되었다.

• 대한인간공학회지
• /
• 제24권3호
• /
• pp.11-27
• /
• 2005

The objectives of this study are to analyze representative wrist postures while using hand tools and parts at general assembly processes, to evaluate perceived discomfort on the wrist when external loads are present, and to suggest an evaluation and prediction model of perceived discomfort. Sixteen subjects participated in an experiment to appraise perceived discomfort. Three types of the wrist postures with five levels of non-neutralities were analyzed when five levels of external load were applied to each posture. The ANOVA results showed that the perceived discomfort of wrist postures was significantly affected by both the wrist posture and external load (p$<$0.001). It was also shown that some of the interactions between external loads and the wrist postures(Flexion/$Extension^*$Load, Flexion/$Extension^*$supination/pronation, ulnar/radial $deviation^*$supination/pronation) were significant(p$<$0.001). The result implies that a new posture classification scheme for workload assessment methods may be needed to reflect such effects of external load and wrist posture. A regression model of perceived discomfort was developed with respect to wrist posture and external load from the experimental data. A subsequent experiment revealed that the correlation coefficient between the predicted values of perceived discomfort from the model and the actual values obtained from the experiment was about 0.98. It is expected that the results help to properly estimate the body stress resulting from worker's postures and external loads and can be used as a valuable design guideline to analyze potential hazard of musculoskeletal diseases in industry.

• Journal of Acupuncture Research
• /
• 제30권5호
• /
• pp.203-209
• /
• 2013

Objectives : The purpose of this study is to report the clinical effects of Korean medical treatment for Kienb$\ddot{o}$ck's disease. Methods : The patient was treated using acupuncture, electroacupuncture, herbal medicine, pharmacopuncture treatment, and other treatments including moxibustion, physical rehabilitation for 6 weeks. And we evaluated the patient through verbal rating scale(VRS), disability of the arm, shoulder and hand(DASH), range of motion(ROM). Results : After treatment, VRS is changed from 7 to 3, DASH is changed from 37.93 to 20.69. And ROM is changed from $60^{\circ}$ to $70^{\circ}$ in wrist flexion, and from $10^{\circ}$ to $15^{\circ}$ in radial deviation. Conclusion : These results suggest that Korean medical treatment is effective to the patient complaining pain and dysfunction.

• 한국전문물리치료학회지
• /
• 제11권4호
• /
• pp.7-17
• /
• 2004

Individuals who propel wheelchairs have a high prevalence of upper extremity injuries (i.e., carpal tunnel syndrome, elbow/shoulder tendonitis, impingement syndrome). Musculoskeletal injuries can result from overuse or incorrect use of manual wheelchairs, and can hinder rehabilitation efforts. To better understand the mechanisms of upper extremity injuries, this study investigates the motion of the wrist during wheelchair propulsion. This study also examines changes in the variables that occur with fatiguing wheelchair propulsion to determine how the time parameters of wheelchair propulsion and the state of fatigue influence the risk of injury. A two dimensional (2-D) analysis of wrist movement during the wheelchair stroke was performed. Twenty subjects propelled a wheelchair handrim on a motor-driven treadmill at two different velocities (50, 70 m/min). The results of this study were as follows; The difference in time parameters of wheelchair propulsion (cadence, cycle time, push time, recovery time, and PSP ratio) at two different velocities was statistically significant. The wrist kinematic characteristics had statistically significant differences at two different velocities, but wrist radial deviation and elbow flexion/extension had no statistically significant differences. There were statistically significant differences in relation to fatigue in the time parameter of wheelchair propulsion (70 m/min) between initial 1 minute and final 1 minute. The wrist kinematic characteristics between the initial 1 minute and final 1 minute in relation to fatigue had statistically significant differences but the wrist flexion-extension (50 m/min) had no statistically significant differences. According to the results, the risk of musculoskeletal injuries is increased by fatigue from wheelchair propulsion. To prevent musculoskeletal injuries, wheelchair users should train in a muscle endurance program and consider wearing a splinting/grove. Moreover, wheelchair users need education on propulsion posture, suitable joint position, and proper recovery patterns of propulsion.

• 한국운동역학회지
• /
• 제23권4호
• /
• pp.295-306
• /
• 2013

The purpose of this study was to provide high school male shot putters training methods of gliding and delivery motion through comparative analysis of kinematic characteristics. To accomplish this purpose, three dimensional motion analysis was performed for the subjects(PKC, KKH, YDL) who participated in high school male shot putter competition on 92nd (2011), 93rd (2013) National Sports Festival. The subjects were filmed by four Sony HXR-MC2000 video cameras with 60 fields/s. The three-dimensional kinematic data of the glide, conversion and delivery phase were obtained by Kwon3d 3.1 version. The data of the shoulder rotational angles and projection angles were calculated with Matlab R2009a. The following conclusions had been made. With the analysis of the gliding and stance length ratio, the gliding length was shorter at the TG than the SG with short-long technique but the gliding and stance length ratio was 46.8:53.2% respectively. The deviation of the shots trajectory from APSS(Athlete-plus-shot-system) revealed that the PKC showed similar to "n-a-b-c-I" of skilled S-shape type, KKH and YDL showed "n-a-d-f-I'" of unskilled type. Furthermore, they showed smaller radial distance from the central axis of the APSS and the shots were away from the linear trajectory. From this characteristics, The PKC who performed more TG than SG had shorter glide with S-shape of APSS(skilled type) showed the better record than others with technical skill. But KKH and YDL had bigger glide ratio with "n-a-d-f-I'" of unskilled type and improved their records with technical factor. The projection factor had an effect on the record directly. Because PKC maintained more lower glide and transition posture with momentum transfer through COG's rapid horizontal velocity respectively the subject possessed the characteristics of high horizontal and vertical velocity with large turning radius from shot putter to APSS.