• 한국공작기계학회논문집
• /
• 제10권5호
• /
• pp.17-24
• /
• 2001

Recently, the requirements for high precision and efficiency machining are gradually increased to raise international competitiveness at the industrial fields of die and molds. This trend had made effects on the industrial fields in Korea and which needs fur studying of high precision and efficiency machining. This study is to investigate the effects of the non-out of end mill in the external cylindrical machining operated by solid carbide end mills with Al-alloy in high speed machining center relating to high spindle revolution and frost fred per minute on the dimensional precision, roundness of workpiece. From the results of experimentations followings are obtained; when Al-alloy is processed by the external cylindrical cutting of end milling through the high speed revolution, if the spindle revolution is higher relating to radial depth of cut, feed per tooth in very lower situation, finally, productivity can be raised because high precision and quality products are machined high efficiently.

• Wind and Structures
• /
• 제15권1호
• /
• pp.65-86
• /
• 2012

Over the last decade substantial improvements have been made in our ability to observe the tropical cyclone boundary layer. Low-level wind speed maxima have been frequently observed in Global Positioning System dropwindsonde (GPS sonde) profiles. Data from GPS sondes and coastal Doppler radars were employed to evaluate the characteristics of tropical cyclone vertical wind profiles in open ocean conditions and at landfall. Changes to the mean vertical wind profile were observed azimuthally and with decreasing radial distance toward the cyclone center. Wind profiles within the hurricane boundary layer exhibited a logarithmic increase with height up to the depth of the wind maximum.

• 한국정밀공학회지
• /
• 제14권2호
• /
• pp.169-177
• /
• 1997

In this study, investigated are the effects of tool rake angles and the change of cutting conditions on the specific cutting pressure in face milling. The cutting force in face milling is predicted from the double cutting edge model in3-dimensional cutting. Conventional specific cutting pressure model is modified by considering the variation of tool rake angles. Effectiveness of the modified cutting force model is verified by the experiments using special face milling cutters with different cutter pockets and various rake angles. From the comparison of the presented model and the specific cutting pressure, it is shown that the axial force can be predicted by the tangential force, radial force and geometric conditions. Also, the rela- tionship between specific cutting pressure and cutting conditions including feedrate, cutting velocity and depth of cut is studied.

• 천문학회보
• /
• 제46권2호
• /
• pp.52.4-52.4
• /
• 2021

The 7-dimensional Telescope (7DT) is an innovative multiple telescope system that can perform a rapid identification of optical counterparts of gravitational-wave (GW) sources and a wide variety of other astronomical projects. This telescope is being developed as a part of the recently approved National Challenge program, the GW Universe project, with a full operation planned at the end of 2023. The word 7-dimension stands for x, y, z positions, the radial velocity, the time, the wavelength, and the flux of astronomical sources, implying the telescope's capability of performing time-series wide-field, IFU-type spectroscopic observations. The 7DT is composed of about twenty 0.5-m wide-field telescopes, and it can obtain spectral-imaging data at 40 different wavelengths to the depth of 20 AB mag with 3 min exposure for a given epoch. In this talk, we will introduce the telescope system, and outline its scientific capabilities with an emphasis on multi-messenger astronomy and a few other key science topics.

• Journal of Radiation Protection and Research
• /
• 제43권1호
• /
• pp.10-19
• /
• 2018

Background: Monte Carlo (MC) simulation is the most accurate for calculating radiation dose distribution and determining patient dose. In MC simulations of the therapeutic accelerator, the characteristics of the initial electron must be precisely determined in order to achieve accurate simulations. However, It has been computation-, labor-, and time-intensive to predict the beam characteristics through predominantly empirical approach. The aim of this study was to analyze the relationships between electron beam parameters and dose distribution, with the goal of simplifying the MC commissioning process. Materials and Methods: The Varian Clinac 2300 IX machine was modeled with the Geant4 MC-toolkit. The percent depth dose (PDD) and lateral beam profiles were assessed according to initial electron beam parameters of mean energy, radial intensity distribution, and energy distribution. Results and Discussion: The PDD values increased on average by 4.36% when the mean energy increased from 5.6 MeV to 6.4 MeV. The PDD was also increased by 2.77% when the energy spread increased from 0 MeV to 1.019 MeV. In the lateral dose profile, increasing the beam radial width from 0 mm to 4 mm at the full width at half maximum resulted in a dose decrease of 8.42% on the average. The profile also decreased by 4.81% when the mean energy was increased from 5.6 MeV to 6.4 MeV. Of all tested parameters, electron mean energy had the greatest influence on dose distribution. The PDD and profile were calculated using parameters optimized and compared with the golden beam data. The maximum dose difference was assessed as less than 2%. Conclusion: The relationship between the initial electron and treatment beam quality investigated in this study can be used in Monte Carlo commissioning of medical linear accelerator model.

• 터널과지하공간
• /
• 제32권4호
• /
• pp.243-253
• /
• 2022

본 연구에서는 회전식 절삭시험기를 활용하여 TBE (Tunnel Boring Extender)의 굴착효율을 평가하였다. 회전식절삭시험에서 TBE에 의한 굴착과정을 모사하기 위하여 중앙부가 선행 굴착되어 있는 중공형의 암석모사시험체를 모르타르를 이용하여 제작하였다. 회전식 절삭시험기에 설치된 언더커팅 디스크(undercutting disc cutter, UDC)를 이용하여 나선궤적을 따라 암석을 절삭함으로써 TBE에 의한 굴착과정을 모사하였으며, 언더커팅 디스크의 절삭조건을 변화시켜가며 절삭조건들이 커터작용력 및 비에너지에 미치는 영향을 살펴보았다. 시험결과로부터 UDC의 커터작용력은 반경압입깊이와 수직압입깊이가 증가함에 따라 선형적으로 증가하는 경향을 확인할 수 있었으며, 세 방향의 작용력 중 수직력의 비중이 매우 크게 나타났다. 반면 비에너지는 반경방향과 수직방향 압입깊이에 따라 지속적으로 감소하는 경향을 나타내었고, 특히 두 압입깊이의 비에 따라 비에너지가 최소화되는 지점이 나타날 것으로 판단되었다.

• 대한토목학회논문집
• /
• 제38권4호
• /
• pp.555-565
• /
• 2018

최근 임시 지보, 보강 및 지하수 차수와 같은 다양한 지질공학분야에서 차수 및 지반보강 공법으로 인공동결공법(artificial ground freezing method)이 적용되고 있다. 인공동결공법은 지중에 매설된 동결관 내로 냉매를 순환시켜 대상 지반에 차수벽 및 지지체의 역할을 할 수 있는 동결벽체(frozen wall)를 형성한다. 본 연구에서는 해성 점토지반(marine clay)에 대한 인공동결공법 현장실증시험을 수행함으로서 인공동결공법에 따른 해성 점토지반에서의 동결속도(freezing rate)를 평가하였다. 현장실증시험은 지중에 3.2m 깊이로 매설된 동결관 내로 초저온 냉매인 액화질소를 순환시키는 방법으로 단일공 시험과 동결벽체 형성 시험을 수행하였다. 자동밸브를 통해 유출되는 액화질소의 온도를 일정하게 유지시켰으며, 동결과정에서 동결관 외벽 및 지중의 온도변화를 측정하였다. 시험결과, 단일공 시험은 부피가 약 $2.12m^3$인 원기둥 모양의 동결체를 형성하는데 총 3.5일 동안 약 11.9ton의 액화질소가 소요되었고, 동결벽체 형성 시험은 부피 약 $7.04m^3$의 동결벽체를 형성하는데 총 4.1일 동안 약 18ton의 액화질소가 소요된 것으로 산정되었다. 임의의 깊이에서 동결면적이 동결반경의 제곱에 비례하기 때문에 동결반경이 증가할수록 방사방향 1차원 동결속도가 감소하였고, 이를 바탕으로 방사방향 1차원 동결속도 예측식을 제시하였다.

• 지질공학
• /
• 제26권3호
• /
• pp.331-337
• /
• 2016

농업용 방사상 집수정은 한국농어촌공사에서 1983년 경북 상주시 이안면에 지하댐 건설과 함께 최초로 설치하였으며, 지금까지 총 98개소의 농업용 방사상 집수정을 관리하고 있다. 이중 20개소는 농업용으로 건설된 5개의 지하댐 상류지역에 설치되었으며, 나머지 78개소는 지하댐 설치와 관계없이 설치되었다. 농업용 방사상 집수정은 대부분 1980년~1990년대 개발되었으며, 83개소는 설치한지 20년 이상 경과된 시설이다. 방사상 집수정의 집수 우물통은 일반적으로 내경 3.5 m, 심도 10 m 이내이며, 수평집수관은 65 mm 구경으로 30 m까지 천공한 후 PVC 집수관을 설치하였으며, 집수정 별로 9~28개 설치되어 있다. 집수정설치지점과 하천과의 이격 거리는 10~1,200 m이며, 최대양수량은 2,000~10,000 m³/day 이다. 방사상 집수정은 개발후 물리·화학적 원인에 의한 공막힘 현상 등으로, 취수량이 감소하여 효율이 저하되는 문제점이 있다. 본 연구에서는 30년이상 경과된 방사상 집수정의 수평집수관에 대하여 서징과 고압세척을 실시하고, 양수시험 및 TV검층을 실시하여 우물세척에 의한 수평집수관 폐색제거 효과를 분석하였다. 우물세척후 비양수량은 67% 증가하였으며, TV검층결과 집수우물통에서 가까울수록 수평집수관 스트레너의 막힘(Clogging) 정도가 심한 것을 확인하였다. 본 연구결과를 활용하여 방사상 집수정에 대한 모니터링과 우물 효율 개선방안을 수립하고, 주기적인 사후관리를 통해 방사상 집수정의 지속가능한 이용을 도모 할 수 있을 것으로 사료된다.

• 한국한의학연구원논문집
• /
• 제14권3호
• /
• pp.121-126
• /
• 2008

Pulse diagnosis refers to the process of diagnosing a patient by feeling an artery on the wrist based on the shape that the pulse take s while the hold-down pressure increase. The styloid process artery on the wrist is usually felt, and the pulse is taken on Chon, Gwan and Cheok using three fingers. This study is to examine the structural difference in the location of pulse diagnosis by measuring and analyzing blood diameter, blood depth, and blood flow velocity of the location of pulse diagnosis by using ultrasonic wave (VOLUSION730 PRO, GE Medical, U.S.A). This study also attempted to grasp whether the characteristics of blood vessels differ depending on Body Mass Index (BMI) and analyzed their correlation with Oriental medical pulse diagnosis. The male subjects without cardiovascular diseases were divided into the normal BMI group, the underweight group and the overweight group and 10 people of each group were measured, Blood depth, blood diameter and blood flow velocity at the location of pulse diagnosis (Chon, Gwan, Cheok) of the wrists of left and right hands were measured and the pulse wave was measured by using pulse diagnosis instrument (3-D Mac, DaeyoMedi, Korea).The results of this study showed that the characteristics of blood vessels differ depending on the degrees of obesity, and the characteristics of floating pulse and sinking pulse of Oriental medical pulses were related to the degrees of obesity. This shows that the characteristics of the blood vessels of subjects and BMI information are the major indicators for diagnosis and are the matters that must always be considered when developing the algorithm of pulse diagnosis.

• Radiation Oncology Journal
• /
• 제2권2호
• /
• pp.271-280
• /
• 1984

The peripheral dose, defined as the dose outside therapeutic photon fields, which is responsible for the functional damage of the critical organs, fetus, and radiation. induced carcinogenesis, has been investigated for $^{60}Co\;\gamma$ ray and 10 MV Xray. It was measured by silicon diode controlled by semiautomated water phantom without any shielding or with lead plate of HVL thickness put horizontally or vertically to shield stray radiations. Authors could obtain following results. 1. The peripheral dose was larger than $0.7\%$ of central axis maximum dose even at 20cm distance from field margin. That is clinically significant, so it should be reduced. 2. Even for square fields of 10 MV Xray, radial peripheral dose distribution did not coincide with transverse distribution, because of the position of collimator jaws. 3. Between surface and $d_m$, the peripheral dose distributions show a pattern of the dose distribution of electron beams and the maximum doss was approximately proportional to the length of a side of square field. 4. The peripheral doses depended on radiation quality, field size, distance from field margin and depth in water. Distance from field margin was the most important factor. 5. Except for near surface, the peripheral dose from phantom was approximately equal to that from therapy unit. 6. To reduce the surface dose outside fields, therapist should shield stray radiations from therapy unit by lead plate of at least one HVL for 10 MV X-ray and by bolus equivalent to tissue of 0.5cm thickness for $^{60}Co$. 7. To reduce the dose at depth deeper than $d_m$, it is desirable to shield stray radiations from therapy unit by lead.