• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.9
• /
• pp.59-64
• /
• 2011

Ultra wideband radars attract considerable attention as a short range automotive radar because of its high range resolution. Radar signal reflected from a target often contains unwanted echoes called as clutter, so the detection of target is difficult due to clutter echoes. Therefore, it is important to investigate the radar detector for better detecting from the reflected signals. In this paper, the optimal detector is obtained for various mean and variance value in log-normal clutter environment. The types of non-coherent detectors used are square law detector, linear detector, and logarithmic detector. The performances of detectors are compared in log normal clutter environment and the suitable detector is determined for automotive short range radar application.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.12
• /
• pp.1292-1299
• /
• 2014

Weather radar systems can provide weather information of the ground, sea, and air in extensive spatial coverage in near real time. However, it becomes problematic when ground clutter signal exists around precipitation because strong signals of ground can cause a false precipitation report. A large percentage of land coverage of Korea consists of mountainous regions where ground clutter needs to be mitigated for more accurate prediction. Thus, it is considered necessary to introduce a new suitable ground clutter removal technique specifically adequate for Korea. In this paper, the C-Map(Clutter Map) method using raw radar signals is proposed for removing ground clutter using a terrain-adaptive clutter map. A clutter map is generated using raw radar signals(I/Q) of clear days, then it is subtracted from received radar signals in frequency domain. The proposed method is applied to the radar data acquired from Sobaeksan rain radar and the result shows that the clutter rejection ratio is about 91.17 %.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.6
• /
• pp.433-440
• /
• 2018

A radar receives reflected signals from various objects to detect a target. Undesired object, called clutter, as well as the target generates reflected signals. The clutter radar cross section(RCS) is dependent on many factors, which are the antenna pattern, distance between the radar and the target, and the height of the target and the radar. Herein, surface clutter RCS for ground-based radar is analyzed, and the effect of the surface clutter RCS on the received signal is investigated.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.7
• /
• pp.730-736
• /
• 2013

Time-domain clutter generation model for airborne pulse doppler phase-array radar is presented. Time-domain surface clutter signal is generated assuming earth of a sphere and considering geometry of a clutter patch, and generation of sub-array clutter signal is presented. The generated sub-array clutter signal can be used by simulation input signal in various radar applications of DBF(Digital Beamforming), ABF(Adaptive Beamforming), Stap(Space-Time Adaptive Processing) and etc.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.1
• /
• pp.89-96
• /
• 2013

This paper presents an improved clutter signal removal algorithm using Singular Value Decomposition(SVD). For indoor positioning system using IR-UWB Radar, the target signal is extracted from received signal. We use clutter signal removal algorithm using SVD for target signal extraction. Clutter signal removal algorithm using SVD has the advantage of operation but the disadvantage of high computational complexity. In this paper, we propose a method to improve computational complexity. As the experimental results, it is confirmed that the method presented in this paper improve the computational complexity of clutter removal algorithm using SVD.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.6
• /
• pp.140-146
• /
• 1989

In many situations, radar targets are embedded in a clutter environment and clutter rejection is required. The clutter is unwanted radar echoes and may arise owing to reflections from ground and weather disturbances and statistical properties of the clutter vary with range and azimuth as well as time. That is, adaptive signal processing is required. In this paper, a clutter suppression algorithm based on the clutter whitening filter (WF) and doppler filter bank(DFB) is described which provides improved performance compared with conventional nonadaptive clutter suppression algorithm that is the cascaded moving target indicator (MTI) and (DFB). The clutter whitening filter algorithm is based on the Burg's maximum entropy method.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.3 s.18
• /
• pp.93-100
• /
• 2004

In this paper, we describe the design, fabrication, and test results of a W-band FMCW radar for the metal target detection under the ground clutter environment. In order to detect metal targets on the ground, we used a single cassegrain antenna with the beamwidth of $1.45^{\circ}$ which forms pencil-beam footprint on the ground. A log envelope detector was applied to improve radar performance in the severe ground clutter known as Weibull and log normal clutter. The designed FMCW radar can acquire altitude information from the ground clutter with $\sigma_0=-23dB$ at the height of 160m. The fabricated W-band FMCW radar transmits 11 dBm power and the dynamic range of the receiver is from -106dBm to -30dBm. The performances of the fabricated sensors were tested out in the fields and detected a car target of 200m apart on the grass.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.10
• /
• pp.1386-1391
• /
• 2018

The radar in the moving platform is interfered by the mainlobe clutter as well as the altitude clutter that is received from sidelobe. The altitude clutter is relatively short range compared to mainlobe clutter and therefore enters the radar with a strong signal. As these clutters are major reason making the probability of false alarm high, it is required to suppress both altitude clutter and mainlobe clutter. In this paper, It is proposed the clutter suppression method consisted of two pulse canceller to suppress the clutters being two frequency area in moving platform. It is analyzed the correlation of output signals according to the use of pulse canceller and provided the structure of staggered pulse canceller considered the correlation. Finally, it shows that altitude clutter and mainlobe clutter are suppressed by proposed staggered pulse canceller using the simulation.

• Journal of the Korea Society for Simulation
• /
• v.27 no.4
• /
• pp.61-68
• /
• 2018

This paper deals with ground clutter model for FOD (foreign object debris) surveillance FMCW (frequency modulated continuous waveform) radar. In the FOD surveillance radar, it has received not only the signals reflected by FOD, but also the clutters of the surface of the runway and the grassland simultaneously. However, to detect the FOD, the clutter rejection algorithm is necessary because the RCS (radar cross section) of FOD is nearly same to RCS of the grassland. In addition, it is difficult to apply the MTI (moving target indicator) algorithm as the clutter rejection algorithm because both the FOD and the clutter coexist stationarily. Hence, to remove the stationary clutter, it is crucial to accurately generate clutter map considering the surface of road. In this paper, in order to generate the clutter map, the respective beat signal at every range bin is generated in the case of only the surface without FOD, and then the beat signal accumulated 100 times. And also, Weibull distribution is applied to the RCS value to take the scattering distribution of clutter into consideration. The simulation results show that FOD can be well detected by applying the generated clutter map to the FOD FMCW radar.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.3 no.2
• /
• pp.66-78
• /
• 1992

Available data for the radar clutter, and the empirical and the theoretical models for the radar clutter have been collected and analyzed. Data sets and models from the remote sensing field have been studied extensively. Although the grazing angles used in remote sensing is larger than the angles normally encountered in radar clutter application, remote sensing field has the merit of abundance of data in much more detailed target classes. The remote sensing model is also superior to the normally used clutter models in the sense that each target class has its own model, rather than being generally characterized by assumed roughness parameters.