• 제목/요약/키워드: RWL

검색결과 21건 처리시간 0.026초

NIOSH Guideline의 국내 산업 적용 적합성에 관한 연구

  • 이관석;전영호;박희석;김윤철
    • 대한인간공학회:학술대회논문집
    • /
    • 대한인간공학회 1994년도 춘계학술대회논문집
    • /
    • pp.105-105
    • /
    • 1994
  • 신체 부위를 이용한 Manual Materials handling(MMH) 작업시 무리한 작업하중의 취급으로 인하 여 많은 사고 또는 요통이 발생하기 때문에 작업자의 능력에 맞는 적정 하중에 대한 연구가 필요 하다. MMH작업의 적정하중에관한 연구는 미국 등의 나라에서는 많이 이루어져 왔으나 우리나라에서 는 연구되어 있지 않다. 미국의 경우 NIOSH Guideline을 만들어 MMH시 작업지침으로 활용하고 있으 나 이 지침을 그대로 우리나라에 적용하기에는 신체조건이 달라 우리나라 고유의 연구가 필요하겠다. 적정하중의 연구에는 많은 시간과 경비가 필요하기 때문에 외국의 경우 심리 육체적방법(Psychophysical Method)을 사용하여 시간과 경비를 줄이고도 실제 8시간 작업시의 결과와 비슷한 결과를 얻었다. 본 연구에서는 MMH작업의 적정 하중결정에 있어서 심리육체적 방법을 사용하여 한국인 작업자에 대한 하중과 HIOSH Guideline의 RWL값과의 비교를 하였다. 학생군과 실제 작업자군의 피실험자에 대하여 심리육체적 방법을 적용하여 들기작업을 실험하였다. 6가지 들기 작업을 20분 동안 실시하여 피실험자들이 자신에게 적합하다고 생각하는 적정하중을 측정하였다. 그 결과, 학생군은 RWL값보다 평균 2.5배를, 작업자군은 3.4 배를 적정하중으로 정하였다. 따라서 HIOSH Guideline을 적용한 RWL값은 우리나라 작업자에게는 많은 여유가 있는 하중임을 보여 주었다.

  • PDF

인력물자취급의 권장안전하중에 대한 생리학적 고찰 (Physiological viewpoint of the recommended safe weights of load for manual materials handling tasks)

  • 김홍기
    • 대한인간공학회지
    • /
    • 제16권3호
    • /
    • pp.23-36
    • /
    • 1997
  • The objective of this study was to make a comparison of the oxygen consumption rates during the lifting activities and the physiological criteria of the recommended weights of RWL, AL, and MPL by NIOSH Guideline. The physical Work Capacity (PWC) based on the bicycle ergometer was 2562.71ml/min, and the one based on the treadmill was 2874.89ml/min for the college male students of Korea. Lifting activities with four different lifting frequencies(2, 5, 8, 11 lifts/min) for one lifting range from floor to 76cm height were studied. The oxygen consumption rates and the heart rates were measured or recorded while subjects were lifting the weight of RWL, AL, and MPL. The heart rates and the oxygen consumption rates increased as the frequency increased from 2 to lifts/min. However, those slightly decreased at the frequency of 11 lifts/ min. The measured oxygen consumption rates were ranging from 2.3% to 29.6% higher than the physiological criteria 620, 700, and 1000ml/min, respectively, of the RWL, AL, and MPL for all the lifting frequencies (5, 8, 11 lift/min) except 2 lifts/min. It si suggested that the physiological criteria of NIOSH Guideline should be based on the lifting PWC, which can consider the type of lifting activity and the frequency of the task, rather than using the PWC by ergometer or treadmill. The measured oxygen consumption rates were ranging from 13.26% to 40.11% higher than the values estimated using the models by Garg and Kim. From these findings it is suggested that the NIOSH Equation should not be directly applied to Korean without resonable modifications.

  • PDF

들기작업 시 몸통각도와 상완각도가 작업부담에 미치는 영향에 관한 연구 (A Study of the Effects of the Trunk Angles and the Upper Ann Angles on Workloads in the Lifting Work)

  • 장성록;박형구
    • 한국안전학회지
    • /
    • 제24권2호
    • /
    • pp.69-75
    • /
    • 2009
  • It is well-known that lifting capacity of a worker is influenced by body posture during the task. When a task analyst make use of RULA and REBA Trunk and upper arm angles are recorded in a separate item. It means that the interaction between the angles of two body segments may be ignored in a final score. The NLE(NIOSH Lifting Equation) has been used to supplement this problem. However, there is no study to validate the result of RWL (Recommended Workload Limit) under the existence of interactions between trunk and upper arm angles. The goal of this study was to assess the effect of the interaction between trunk and upper arm angles. Three responses, including NMVC(normalized maximum voluntary contraction), RWL(Recommended Weight Limit) and subjective judgment in psychophysical method (Borg's scale), were recorded according to the combinations of three trunk angles and nine upper arm angles. The results showed that lifting capacity is highly influenced by interaction of two body segments(trunk and upper arm). It means that the task workload has to be analyzed along with the interaction of trunk angles and upper arm angles when the task analyst assesses potential risk factors on the postures. This study may be able to be a fundamental study to develop an assessment method for lifting task analyses according to body postures.

Change of Physical, Psychological Status through Rapid Weight Loss in National Judo Athletes

  • Kim, Hyun Chul;Park, Ki Jun;Bae, Moon Jung;Kim, Yang Rae
    • 국제물리치료학회지
    • /
    • 제9권4호
    • /
    • pp.1669-1675
    • /
    • 2018
  • The present study aimed to investigate rapid weight loss (RWL) and consequent physical and psychological challenges among judo athletes at the national athlete training center in 2017. The following results were obtained. Judo athletes used weight loss methods such as "gradually reduce meal portion," "skip meals," "limit water intake," "wear sweat suit for training," and "use sauna," and had physical and mental distress from such unhealthy weight management practices. Information about weight loss was obtained from "colleagues or senior athletes," "Internet," and "head coach or coach," and not experts such as nutritionists or physicians. Thus, athletes are recommended to employ healthy weight control methods based on advice from experts, such as nutritionists and physicians.

평화의 댐 흥수지체 효과에 따른 화천댐 계통 이수 능력의 증대에 대한 검정 (Identification of Expanding the Usability of the Water Resources in Hwacheon Dam System Due to the Flood Surcharging Effects of Peace Dam)

  • 유주환;박창근;조효섭
    • 한국수자원학회논문집
    • /
    • 제34권6호
    • /
    • pp.617-625
    • /
    • 2001
  • 수공 방어용으로 건설된 평화의 댐은 화천댐과 연계되어 있고 배수 터널과 함께 1단계 준공 상태로서 화천댐 상류에 위치하여 댐 하류에 홍수지체 효과를 갖는다. 따라서 본 연구에서는 현 평화의 댐의 활용방안을 연구할 목적으로 화천댐 시스템 조작을 수행하여 평화의 댐 홍수조절효과와 화천댐의 홍수기 제한수위 등을 검토하고 평가하였다. 그리고 이 결과를 분석하여 화천댐 계통의 이수 증대 방안을 제시하였다. 이를 위해서 우선 저수지 조작 기준과 모형을 설정한 다음 저수지 조작의 최적화를 수행하였다. 이 결과를 바탕으로 최적치에 대한 실적치의 상대적인 값으로 조정계수를 평가하였다. 그리고 화천댐 제한수위의 몇가지 대안에 대하여 최적 저수지 조작을 수행하여 제한수위 적정 수준을 제시하고 경제적인 편익 또한 평가하였다.

  • PDF

자생식물로부터 내건성 식물의 최적인자 선발과 생육특성 (Selection Indices to Identify Drought-tolerance and Growth Characteristics of the Selected Korean Native Plants)

  • 임현정;송현진;정미진;서영롱;김학곤;박동진;양우형;김용덕;최명석
    • 농업생명과학연구
    • /
    • 제50권2호
    • /
    • pp.73-82
    • /
    • 2016
  • 본 연구에서는 내건성 식물 선발을 위한 최적 인자를 구명하고, 이들 내건성 식물들의 생장특성을 조사하였다. 건조저항인자에 대한 나머지 건조저항일(RD), 엽면적(LD), 단위증산량(UTR), 상대함수량(RWC), 상대수분손실량(RWL), 엽면적(LA), 기공수(SN) 및 기공면적(SA) 등 6개 인자들을 비교한 결과 상대수분손실량과 단위증산량이 건조저항일에 많은 영향을 주는 것으로 나타났다. PCA분석 결과 SA, LA, RD는 한그룹으로 RWC와 SN은 다른 한 그룹으로 구분되었고, UTR은 SA, LA와, RWL은 RWC와 SN과 음의 상관을 보였다. 상기 결과를 종합하여 느릅나무, 도깨비바늘, 뚝갈, 매듭풀, 새, 더위지기, 맑은대쑥, 독말풀, 긴담배풀, 소리쟁이, 비수리, 장구채, 개기장, 도깨비가지를 내건성 식물 종으로 선발하였고, 이들에 대한 생장시험을 수행하였다. 절토사면지에서 내건성 식물의 줄기생장은 식물 종간에 약간의 차이를 보였는데, 줄기생장과 잎의 수는 느릅나무를 제외하고 폿트에서는 차이를 보이지 않았다. 그러나 절토사면지에서 내건성 식물 뿌리 생장과 T/R율은 폿트생장과 큰 차이를 보였고, 특히 T/R율은 폿트묘보다 월등히 낮았다. 이 결과로 보아 선발된 내건성 식물은 절토사면지와 같이 척박한 토양에서도 잘 적응할 것으로 나타나 내건성 식물의 육종 등에 이용될 수 있을 것으로 판단된다.

정신물리학적 접근방법을 이용한 들기작업의 작업하중 평가에 관한 연구 (A Psychophysical Approach on the Assessment of Lifting Loads)

  • 박현진;옥민우;장성록
    • 한국안전학회지
    • /
    • 제27권4호
    • /
    • pp.96-100
    • /
    • 2012
  • Low back pain (LBP) is a major issue in modern industrialized society which is mainly caused by manual material handling (MMH) tasks. The objective of this study was to provide scientific data for establishing work standard for Korean workers throughout the laboratory experiment including some specific lifting tasks. Thirty male college students were recruited as participants. The maximum voluntary contraction (MVC), recommended weight limit (RWL), and psychophysical safety weight using Borg's CR-10 scale were studied. Results showed that the RWL was 8.4% MVC higher than the proposed psychophysical safety weight. Based on this result, it is suggested that the NIOSH lifting equation (NLE) should not be directly applied to Korean without reasonable modifications. The ratio of psychophysical safety weight to MVC was ranged from 20.1 to 26.4%. It is expected that use of the methodology in this study may provide better expectation of the work ability of Korean for reducing lower back pains caused by MMH.

저전력 OTP Memory IP 설계 및 측정 (Design of low-power OTP memory IP and its measurement)

  • 김정호;장지혜;김려연;하판봉;김영희
    • 한국정보통신학회논문지
    • /
    • 제14권11호
    • /
    • pp.2541-2547
    • /
    • 2010
  • 본 논문에서는 대기 상태에서 저전력 eFuse OTP 메모리 IP틀 구현하기 위해 속도가 문제가 되지 않는 반복되는 블록 회로에서 1.2V 로직 트랜지스터 대신 누설 (off-leakage) 전류가작은 3.3V의 MV (Medium Voltage) 트랜지스터로 대체하는 설계기술을 제안하였다. 그리고 읽기 모드에서 RWL (Read Word-Line)과 BL의 기생하는 커패시턴스를 줄여 동작전류 소모를 줄이는 듀얼 포트 (Dual-Port) eFuse 셀을 사용하였다. 프로그램 전압에 대한 eFuse에 인가되는 프로그램 파워를 모의실험하기 위한 등가회로를 제안하였다. 하이닉스 90나노 CMOS 이미지 센서 공정을 이용하여 설계된 512비트 eFuse OTP 메모리 IP의 레이아웃 크기는 $342{\mu}m{\times}236{\mu}m$이며, 5V의 프로그램 전압에서 42개의 샘플을 측정한 결과 프로그램 수율은 97.6%로 양호한 특성을 얻었다. 그리고 최소 동작 전원 전압은 0.9V로 양호하게 측정되었다.

$0.18{\mu}m$ Generic 공정 기반의 8비트 eFuse OTP Memory 설계 (Design of an eFuse OTP Memory of 8bits Based on a Generic Process)

  • 장지혜;김광일;전황곤;하판봉;김영희
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2011년도 춘계학술대회
    • /
    • pp.687-691
    • /
    • 2011
  • 본 논문에서는 아날로그 트리밍용으로 사용되는 $0.18{\mu}m$ generic 공정 기반의 EM(Electro-Migration)과 eFuse의 저항 변동을 고려한 8bit eFuse OTP (One-Time Programmable) 메모리를 설계하였다. eFuse OTP 메모리는 eFuse에 인가되는 program power를 증가시키기 위해 external program voltage를 사용하였으며, 프로그램되지 않은 cell에 흐르는 read current를 낮추기 위해 RWL (Read Word-Line) activation 이전에 BL을 VSS로 precharging하는 방식과 read NMOS transistor를 최적화 설계하였다. 그리고 프로그램된 eFuse 저항의 변동을 고려한 variable pull-up load를 갖는 sensing margin test 회로를 설계하였다. 한편 eFuse link의 length를 split하여 eFuse OTP의 프로그램 수율 (program yield)을 높였다.

  • PDF

PMIC용 32bit eFuse OTP 설계 (Design of a 32-Bit eFuse OTP Memory for PMICs)

  • 김민성;윤건수;장지혜;김려연;하판봉;김영희
    • 한국정보통신학회논문지
    • /
    • 제15권10호
    • /
    • pp.2209-2216
    • /
    • 2011
  • 본 논문에서는 Magnachip $0.18{\mu}m$ 공정을 이용하여 PMIC용 32bit eFuse OTP IP를 설계하였다. eFuse 링크 아래에 N-Well을 두어 프로그램시 eFuse 링크와 p-기판의 VSS가 단락되는 문제점을 해결하였다. 그리고 디코딩된 WERP (WL Enable for Read or Program) 신호가 eFuse OTP 메모리로 바로 입력되는 경우 듀얼 포트 eFuse OTP 메모리 셀의 RWL (Read Word-Line)과 WWL (Write Word-Line)을 선택적으로 활성화해 주는 WL 구동회로를 제안하였다. 또한 BL 프리차징 회로에서 delay chain을 제거하여 제어회로의 레이아웃 면적을 줄였다. 메모리 테스트 장비를 이용하여 제작된 94개의 샘플 die를 측정한 결과 5.5V의 프로그램 전압에서 100%의 수율을 얻었다.