• Tribology and Lubricants
• /
• 제22권4호
• /
• pp.211-217
• /
• 2006

Ring and groove wear may not be a problem in most current automotive engines. However, a small change in ring face and groove geometry can significantly affect the lubrication characteristics and ring axial motion. This in turn can cause to change inter-ring pressure, blow-by and oil consumption in an engine. Therefore, by predicting the wear of piston ring face, ring groove and cylinder bore altogether, the changed ring end gap and the changed volume of gas reservoir can be calculated. Then the excessive oil consumption can be predicted. Being based on the calculation of gas flow amount by the theory of piston ring dynamics and gas flow, and the calculation of oil film thickness and friction force by the analysis of piston ring lubrication, the calculation theory of oil amount through top ring gap into combustion chamber will be set. This is estimated as engine oil consumption. Furthermore, the wear theories of ring, groove and cylinder bore are included. Then the each amount of wear is to be obtained. The changed oil consumption caused by the new end gap and the new volume of oil reservoir around second land, can be calculated at some engine running interval. Meanwhile, the wear amount and oil consumption occurred during engine durability cycle are compared with the calculated values. Next, the calculated amount of oil consumption and wear are compared with the guideline of each part's wear and oil consumption. So, the timing of part repair and engine life cycle can be predicted in advance without performing engine durability test. The wear data of rings and grooves are obtained from three engines before and after engine durability test. The calculated wear data of each part are turn out to be at the lower bound of aver-aged test values or a little below.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.274-277
• /
• 2012

In this paper, we proposes the design of laundry system for low power and smart management. The low power system configures the network with the RF communication module that turn on/off periodically, power consumption less than operating the module all the time without it toggles. The smart management is RFID Laundry Management System (LMS), in order to provide high services, low operation costs and better monitoring. The proposed system consists of RFID tag, wireless RFID hanger and MFC software. To compare with other existing RFID system, our system was developed as a web application. Therefore, customer can check their cloth status through web page or smartphone devices. RFID reader was designed on hanger to make our system enables reliable running effectively. Some results on the performance of an implementation are presented.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권6호
• /
• pp.2979-2995
• /
• 2017

In recent years, there has been an increasing number of studies focused on identifying a set of spreaders to maximize the influence of spreading in complex networks. Although the k-core decomposition can effectively identify the single most influential spreader, selecting a group of nodes that has the largest k-core value as the seeds cannot increase the performance of the influence maximization because the propagation sphere of this group of nodes is overlapped. To overcome this limitation, we propose a neighborhood coreness cover and discount heuristic algorithm named "NCCDH" to identify a set of influential and decentralized seeds. Using this method, a node in the high-order shell with the largest neighborhood coreness and an uncovered status will be selected as the seed in each turn. In addition, the neighbors within the same shell layer of this seed will be covered, and the neighborhood coreness of the neighbors outside the shell layer will be discounted in the subsequent round. The experimental results show that with increases in the spreading probability, the NCCDH outperforms other algorithms in terms of the affected scale and spreading speed under the Susceptible-Infected-Recovered (SIR) and Susceptible-Infected (SI) models. Furthermore, this approach has a superior running time.

• 한국콘텐츠학회논문지
• /
• 제15권7호
• /
• pp.138-147
• /
• 2015

광고정책은 새로운 방송사업자가 등장할 때마다 광고 유형별 진입장벽을 만들어 안정적인 성장 기반을 제공하는 방식으로 변해왔다. 하지만 지속적인 광고시장 위축은 광고 유형별 진입장벽을 제거할 수밖에 없는 상황을 초래하고 있다. 광고 유형별 진입장벽 해체는 제작주체들로 하여금 광고 획득을 위한 과잉 경쟁 상황에 빠져들게 함으로써 제작비를 상승시키는 악순환 과정을 유발한다. 자유경쟁 시장 상황에서 발생하는 문제를 해결하는 방법은 냉혹한 시장 원리에 방송 제작산업을 개방해두는 것이다. 시장에 존재하는 제작주체들의 적절한 수를 결정하는 것은 시장 자체의 기능이다. 따라서 경쟁에서 도태되는 제작주체들은 시장에서 퇴출되는 체계를 구축해야 한다. 또한 궁극적으로 수신료 기반의 공영방송은 광고를 금지하는 방향의 정책적 대안 마련이 필요하다.

• 수산해양기술연구
• /
• 제30권4호
• /
• pp.312-319
• /
• 1994

Recently, with the rapid development in the industries such as an iron mill and chemical plants, there is enlarged by the use of the piping. Sepecially, the piping connected with a fluid, if it is increase the speed of running fluid, ought to generate cavitation phenomenon with unbalanced pressure. So, the cavitation phenomenon cause serious damage of the piping, because it generate erosion and corrosion in the piping. In this study, the steel pipe piping water (SPPW) and SPPW on weldment were tested by using of cavitation-erosion test apparatus with nozzle and were investigated under the marine environment of liquid. (specific resistance : 25 $Omega$. cm) The main results obtained are as follows : 1) The total weight loss and weight loss rate of affected zone of weldment by corrosion-erosion in the sea water are more increased than that of base metal. 2) The electrode potential by corrosion-erosion in the sea water becomes less noble than that of base metal, and current density is more increased. 3) As time goes by, the total weight loss and weight loss rate by cavitation erosion-corrosion in air-liquid 2 phase flow become more increased then those in only liquid solution. but these values turn to be decreased.

• 제어로봇시스템학회논문지
• /
• 제7권5호
• /
• pp.420-426
• /
• 2001

In this paper, we introduce a case study of developing a miniature humanoid robot that has 16 degrees of freedom and is able to perform statically stable walking. The developed humanoid robot is 37cm tall and weighs 1,200g. RC servo motors are used as actuators. The robot can walk forward and turn to any direction on an even surface. It equipped with a small digital camera, so it can transmit vision data to a remote host computer via wireless modem. The robot can be operated in two modes: One is a remote-controlled mode, in which the robot behaves according to the command given by a human operator through the user-interface program running on a remote host computer, the other is a stand-alone mode, in which the robot behaves autonomously according the pre-programmed strategy. The user-interface program also contains a robot graphic simulator that is used to produce and verify the robot\`s gait motion. In our walking algorithm, the ankle joint is mainly used for balancing the robot. The experimental results shows that the developed robot can perform statically stable walking on an even surface.

• Membrane and Water Treatment
• /
• 제5권1호
• /
• pp.1-14
• /
• 2014

A pilot-scale hybrid membrane bioreactor (HMBR) for real municipal wastewater treatment was developed by adding biofilm carriers into a conventional membrane bioreactor, distribution and dynamic changes of the extracellular polymeric substances (EPS) and their roles in membrane fouling were investigated. The results showed that the concentrations of loosely bond EPS (LB-EPS) and tightly bond EPS (TB-EPS) in activated sludge, carrier biofilm and sludge cake layer have been increased significantly with the running time of HMBR, during operation of the HMBR, EPS demonstrated positive correlations with membrane fouling. Compared to TB-EPS, LB-EPS showed more significant correlations with sludge physical properties and specific resistance to filtration (SRF) in HMBR, and thus demonstrated that LP-EPS have a stronger potential of fouling than TB-EPS. It was also found that a lower organic loading in HMBR could result a significant increase in EPS concentration, which would in turn influence membrane fouling in HMBR. This critical investigation would contribute towards a better understanding of the behavior, composition and fouling potential of EPS in HMBR operation.

• 혜화의학회지
• /
• 제19권2호
• /
• pp.1-12
• /
• 2011

21th century is a era of new pandemic. We are facing a new challenge and need a new way of approach. But eastern medicine and western medicine is clinging to their own way and have no intention to hear other one's opinion. Before the invention of the vaccination, smallpox has always been a major problem. Intellectuals in every country tried their best to find the treatment for the smallpox, and for Europian, didn't hesitate to borrow some knowledge of the pagon. Romans adopted the Galens concept, running away from the epidemic lesion. Christianity made smallpox Saints, and later adopted Razes heat therapy. But in the 17th century, these methods didn't turn out well, so they needed a new way of approach. By this movement, they had adopted the Chinese inoculation concept and invented a vaccination, By studying the effort of the Europian intellectuals who had tried their best to find the treatment for the smallpox until 17th century, we might get a glimps of wisdom which they had shown us. By this paper we can feel the passion to learn new techniques and their open mind and courage, which might be also needed in the 21th century, era of new pandemic.

• Fashion, Industry and Education
• /
• 제15권1호
• /
• pp.1-11
• /
• 2017

The proliferation of social media has given rise to the new consumer group, namely, social consumers. This study identified the distinct characteristics of social consumers (i.e., online social search, online social navigation, online social connection) and examined the impacts of social consumer attributes on the engagement with fashion brands via brands' SNSs (BSNSs). A sample of 141 U.S. consumers who had browsed and/or participated in a fashion brand's BSNS (i.e., the Facebook page for fashion brands) was used to examine hypothesized relationships. The analyses involved running a confirmatory factor analysis and a structural equation modeling. The result indicates that the impacts of the social consumer attributes on the benefits of BSNSs (i.e., experiential and functional benefits) as perceived by consumers were significant, except the link between online social connection and functional benefits. In addition, consumers' existing relationship with a brand served as a moderating variable, strengthening the impacts of social consumer attributes on BSNS benefits. The perceived benefits of BSNSs positively affected perceived relationship investment which in turn influenced brand loyalty. Practical marketing suggestions are provided for fashion brands.

• 수산해양기술연구
• /
• 제34권1호
• /
• pp.62-66
• /
• 1998

The maneuverabilities of the training ship M.S. HEUIMANGBONG were studied, based on the data obtained from her Z test. The results obtained were summerized as follows: 1. The maneuvering indices K' and T'of the M.S. HEUIMANGBONG were 0.542, 1.305 at 10$^{\circ}$Z Test and 0.433, 1.351 at 20$^{\circ}$Z test and 0.442, 1.388 at 30$^{\circ}$Z test respectively. The above calculated values K', T' showed that her maneuverabilities were more effective when her rudder was used to small angle than to large angle. 2. As the overshoot angles of the starbord side of the M.S. HEUIMANGBONG were larger than those of port side at 10$^{\circ}$, 20$^{\circ}$and 30$^{\circ}$Z test, her maneuverabilities in port turning were found to be higher than in starbord turning. 3. The running distance of a turn at her 10$^{\circ}$Z test was about 9.9 times her own length and she was considered to have a good maneuverabilities synthetically