• 한국운동역학회지
• /
• 제19권4호
• /
• pp.663-669
• /
• 2009

본 연구의 목적은 런닝 턴 동작시 많은 정확한 턴을 위한 방법으로 발의 움직임을 역학적으로 분석하기 위함이다. 런닝 턴 동작에 대한 많은 역학적인 요인들 중 정확한 턴을 위해서는 감속이 발생되고 이런 감속은 진행하고자 하는 방향으로 턴을 할 수 있게 해준다. 턴이 시작되는 시점인 발의 회전각과 이로 발생되는 몸통의 각을 3차원 영상분석과 지면반력 분석을 하였다. 따라서, 여러 매개변수들 중 수직축(z축)에서 발의 총 회전각($\theta_f$)/몸통 총 회전각($\theta_d$)= 발의 효과($\varepsilon$)로 단순화 시켜 간단한 방정식을 만들어서 설명했으며, 자료 산출을 위해 평균 속력 4.5m/s에서 진행 방향 $0^{\circ}$, $30^{\circ}$, $60^{\circ}$ 턴에 대한 분석을 통해 턴의 각이 커지면 커질수록 입각기 시간, 발 변위, 좌 우힘이 증가했음을 알 수 있었다.

• Structural Engineering and Mechanics
• /
• 제76권2호
• /
• pp.207-222
• /
• 2020

Due to the rugged terrain, metro lines in mountain city across numerous wide rivers and deep valleys, resulting in instability of high-pier bridge and insecurity of metro train subjected to fluctuating crosswind. To ensure the safe operation in metro lines in mountain cities, running safety of the metro train over the high-pier bridge under crosswind is analyzed in this paper. Firstly, the dynamic model of the wind-train-bridge (WTB) system is built, in which the speed-up effect of crosswind is fully considered. On the basis of time domain analysis, the basic characteristics of the WTB system with high-pier are analyzed. Afterwards, the dynamic responses varies with train speed and wind speed are calculated, and the safety zone of metro train over a high-pier bridge subjected to fluctuating crosswind in mountain city is determined. The results indicate that, fluctuating crosswind triggers drastic vibration to the metro train and high-pier bridges, which in turn causes running instability of the train. For this reason, the corresponding safety zone for metro train running on the high-pier is proposed, and the metro traffic on the high-pier bridge should be closed as the mean wind speed of standard height reaches 9 m/s (15.6 m/s for the train).

• 한국항해항만학회지
• /
• 제40권6호
• /
• pp.353-360
• /
• 2016

IMO는 선박의 조종성능과 복원성능에 관한 국제적 기준 마련에 노력해 왔다. 이러한 움직임은 해상에서의 선박 안전 향상에 기여하였으며, 선박 연구자가 수행하는 학술적 연구의 방향에도 영향을 미쳤다. 기존의 수행된 선박 조종성능과 조종성능 연구는 각각 그 분야에서 독립적으로 수행되어 왔다. 두 분야의 상호 관계에 관한 연구는 미비한 실정이다. 이에 본 논문에서는 선박의 조종성능과 복원성능의 상호 관계를 정량적으로 규명하고자 기초적인 실험 연구를 수행하였다. 각 두 항목을 나타내는 지표로 복원성능은 GM 변화를 사용 하였고, 선박의 조종성능은 선회성능을 선택하여 이 두 지표의 상호관계에 관해 정량적인 분석을 시도하였다. 이를 위하여 자유 항주 모형선을 이용한 선회 실험을 실시하고, GM변화에 따른 선회 반경 및 선회 중 발생하는 최대 횡경사 각도의 변화를 분석 하였다. 실험 결과 GM에 따른 선회 반경 감소 및 초기 횡경사 증가의 경향이 서로 다르게 나타났다. 이를 이용하여, GM 감소에 따른 선회반경 및 초기 횡경사 변화 예측을 위한 개략적인 경향 추정식을 제안 하였다. 선박은 운항 중 예상하지 못한 원인으로 갑작스럽게 GM이 감소 할 수 있다. 본 논문에서 얻은 실험 결과는 GM감소량에 따른 선박의 선회반경 및 조타에 의한 횡경사 각도 변화 크기를 개략적으로 추정하기 위한 기초 자료로 활용 될 수 있을 것으로 기대된다.

• Wind and Structures
• /
• 제29권5호
• /
• pp.299-312
• /
• 2019

Due to the rugged terrain, metro lines in mountain city across numerous wide rivers and deep valleys, resulting in instability of high-pier bridge and insecurity of metro train under crosswind. Compared with the conditions of no-wind, crosswind triggers severer vibration of the dynamic system; compared with the short-pier viaduct, the high-pier viaduct has worse stability under crosswind. For these reasons, the running safety of the metro vehicle traveling on a high-pier viaduct under crosswind is analyzed to ensure the safe operation in metro lines in mountain cities. In this paper, a dynamic model of the metro vehicle-track-bridge system under crosswind is established, in which crosswind loads model considering the condition of wind zone are built. After that, the evaluation indices and the calculation parameters have been selected, moreover, the basic characteristics of the dynamic system with high-pier under crosswind are analyzed. On this basis, the response varies with vehicle speed and wind speed are calculated, then the corresponding safety zone is determined. The results indicate that, crosswind triggers drastic vibration to the metro vehicle and high-pier viaduct, which in turn causes running instability of the vehicle. The corresponding safety zone for metro vehicle traveling on the high-pier is proposed, and the metro traffic on the high-pier bridge under crosswind should not exceed the corresponding limited vehicle speed to ensure the running safety.

• Asia Marketing Journal
• /
• 제15권2호
• /
• pp.117-132
• /
• 2013

Recent developments in embodied cognition suggest that people process environmental information by using their bodily state and mental simulation. The focus of embodiment theory is that cognitive processing is based on the interaction among the body, the mind, and the world. Based on embodied theories of cognition, the authors predict that when the representation of marathon running is activated, bodily feedback such as tiredness and thirst will occur because mental simulation of marathon running contains sensorimotor representation of marathon running. As a result, it is predicted that participants primed with marathon runner will have more desire to have products that enable thirsty-quenching. Specifically, this research proposes that consumers' tendency to adopt the perspective of others influences embodied cognition, since perspective taking leads people to assimilate their own self-judgments and behaviors toward the cognitive representations of others. An experiment reveals that both perceptual and cognitive perspective taking tendencies moderate how participants respond to the contextual cues. The effect of perspective taking is moderated by whether participants are prompted to adopt a first-person view or a third-person view. In detail, among the high perspective takers, those in the marathon-first-person condition drink more the mineral water than those in the marathon-third-person condition, who in turn drink more the mineral water than those in the control condition. Among the low perceptual perspective takers, however, there are no significant differences in the amount of mineral water intake. This research delivers important insights for advertising messages. When being exposed to an advertisement, high perspective taking consumers may be more engaged in the advertised message than low perspective taking consumers, which in turn high (vs. low) perspective taking consumers' tendency to respond behaviorally consistent with the message may be higher. Based on the findings of this research, if the message induces the high perspective taking consumers to have a first- (vs. third-) person view, this effect may be stronger. Moreover, if the advertising message contains behaviors, such as using the target product, inducing consumers to mimic the behaviors seems to bring more behavioral responses which marketers intend.

• 한국운동역학회지
• /
• 제24권3호
• /
• pp.201-207
• /
• 2014

This study investigated the center of mass and lower extremity kinematic patterns between carved and basic paralell turn during alpine skiing. Six experienced skiers (age: $20.67{\pm}4.72yrs$, body mass: $72.67{\pm}7.15kg$, height: $171.00{\pm}5.51cm$) participated in this study. Each skier were asked to perform carved and basic paralell turn on a $22.95^{\circ}$ groomed slope. Each turn was divided into the initiation phase, steering phase 1 and 2. The results of this study show that the carved turn spent significantly less running time than basic paralell turn at all three phases (p<.05). Also vertical displacement of the center of mass was significantly greater in carved turn at all three phases, whereas inward leaning angle of the center of mass was significantly greater in carved turn at the steering phase 1 and 2 (p<.05). Bilateral knee and hip joint angle were significantly greater in basic paralell turn at the initiation phase and the steering phase 2 (p<.05). On the other hand, left knee and hip joint angle were significantly greater in basic paralell turn at the steering phase 1 (p<.05). In order to perform successful carved turn, we suggest that skiers should coordinate bilateral knee and hip joint angles to adjust the center of mass, depending on three ski turn phases.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.737-739
• /
• 2015

In this paper, a novel method of sensorless control scheme is proposed to apply on a single phase hybrid SRM used in high speed operation. The proposed method utilizes beneficially permanent magnet field whose performance is motor parameter independent to estimate the rotor position. Also, the current slope is adopted to complete the sensorless control when the motor running with heavy torque at high speed condition. Through this approach, the adjustable turn on/off position can be achieved without prior knowledge of inductance profile which is always employed by many sensorless schemes. And this paper may offer an available method to do the sensorless control in hybrid SRM used for high speed running.

• 한국전자거래학회:학술대회논문집
• /
• 한국전자거래학회 2003년도 종합학술대회 논문집
• /
• pp.84-89
• /
• 2003

For running various construction processing information and technological information, it is supplied by Construction CALS/EC systems properly during whole facilities life cycle. So it is urgently necessary to change Regional Construction 8t Management Office (RCMO) equipment construction administration business to electron processing system (CALS/EC). From construction work plan to completion, a present storage documents system is unsystematic. Therefore, it needs management system to store documents and to read in turn documents properly. This research suggest that it is to connect with various information systems and Construction CALS/EC for RCMO which is running public construction field. So it can be driven systematic and effective administration system about public construction business by Web-based present construction situation information system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.507-509
• /
• 2015

In this paper, a novel method of sensorless control scheme is proposed to apply on a single phase hybrid SRM used in high speed operation. The proposed method utilizes beneficially permanent magnet field whose performance is motor parameter independent to estimate the rotor position. Also, the current slope is adopted to complete the sensorless control when the motor running with heavy torque at high speed condition. Through this approach, the adjustable turn on/off position can be achieved without prior knowledge of inductance profile which is always employed by many sensorless schemes. And this paper may offer an available method to do the sensorless control in hybrid SRM used for high speed running.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.3226-3236
• /
• 2011

In this paper, with the background features on which measuring the transverse left-right and up -down vibration of wheel, bogie and body by wireless measurement system, performance evaluation systems which can assess the running behavior of high speed trains based on UIC code 518-OR and evaluate the ride comfort of them based on ISO code 2631 and UIC code 513 were developed. The characteristics of dynamic vibration are generally analyzed by an acceleration of a car body of high speed train and the acceleration can be applied to evaluation of running safety. In this paper, also matching system of distance from tachometer and vibration from accelerometer was programmed in development software, and the SD card embedded system which prevent to loss of data in wireless measurement was mounted on this system. Finally the software perform to analysis with filtering and statistical post-process in the unit sections and zones and focus on developing the capability monitoring in the main control center. For the verification of this system, the running behavior and safety factor were analyzed based on field measured data of the Cheonjun-gunnum-sun turn out point in the new KTX railway.