• Journal of Positioning, Navigation, and Timing
• /
• v.5 no.2
• /
• pp.59-66
• /
• 2016

The International GNSS Service (IGS) provides the IGS-Real Time Service (IGS-RTS) corrections that can be used in stand-alone positioning in real time. In this study, the positioning accuracy before and after the application of the corrections to broadcast ephemeris by applying the IGS-RTS corrections at code pseudo-range based stand-alone positioning was compared with positioning result using precise ephemeris. The analysis result on IGS-RTS corrections showed that orbit error and clock error were 0.05 m and 0.5 ns compared to precise ephemeris and accuracy improved by about 8.5% compared to the broadcast ephemeris-applied result when the IGS-RTS was applied to positioning. Furthermore, regionally dispersed five observatories were selected to analyze the effect of external environments on positioning accuracy and positioning errors according to location and time were compared as well as the number of visible satellites and position dilution of precision by observatory were analyzed to verify a correlation with positioning error.

• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.4
• /
• pp.209-214
• /
• 2019

Precise point positioning (PPP) requires precise orbit and clock products. International GNSS service (IGS) real-time service (RTS) data can be used in real-time for PPP, but it may not be possible to receive these corrections for a short time due to internet or hardware failure. In addition, the time required for IGS to combine RTS data from each analysis center results in a delay of about 30 seconds for the RTS data. Short-term orbit prediction can be possible because it includes the rate of correction, but the clock correction only provides bias. Thus, a short-term prediction model is needed to preidict RTS clock corrections. In this paper, we used a long short-term memory (LSTM) network to predict RTS clock correction for three minutes. The prediction accuracy of the LSTM was compared with that of the polynomial model. After applying the predicted clock corrections to the broadcast ephemeris, we performed PPP and analyzed the positioning accuracy. The LSTM network predicted the clock correction within 2 cm error, and the PPP accuracy is almost the same as received RTS data.

• Journal of Advanced Navigation Technology
• /
• v.20 no.5
• /
• pp.425-432
• /
• 2016

When user estimates user's position, GPS positions can be obtained from the navigation message transmitted from the GPS. However, the broadcast ephemeris cannot be used in the applications required high-level accuracies because it can cause errors of several meters. To correct satellite positions and clocks, user can use RTS corrections provided by IGS. In this paper, the accuracy of broadcast and RTS corrections are analyzed by comparing with the IGS final for 3-months. The RTS errors are analyzed for each user's locations and satellite blocks. The correlations between errors and shadow condition, and solar and geomagnetic activities are analyzed. The latency is applied to the RTS corrections, and these are extrapolated by polynomial. Then, the extrapolated RTS are compared with true RTS. The single-day performances of the PPP by broadcast ephemeris and RTS corrected ephemeris are analyzed. As a result, RTS 3D orbit and clock errors are 1/20 and 1/3 less than broadcast ephemeris errors. 3D positioning error of the RTS is 1/5 less than that of broadcast ephemeris.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.533-539
• /
• 2020

Real-time service (RTS) provided by IGS provides correction for GNSS orbit and clock via internet, so it is widely used in fields that require real-time precise positioning. However, the RTS signal may be lost due to an unstable Internet environment. When signal disconnection occurs, signal prediction can be performed using polynomial models. However, the RTS changes rapidly after the GNSS navigation message issue of data (IOD) changes, so it is difficult to predict when signal loss occurs at that point. In this study, we proposed an algorithm to generate continuous RTS correction information by applying the difference in navigation trajectory according to IOD change. The use of this algorithm can improve the accuracy of RTS prediction at IOD changes. After performing optimization studies to improve RTS prediction performance, the predicted RTS trajectory information was applied to precision positioning (PPP). Compared to the conventional method, the position error is significantly reduced, and the error increase along with the signal loss interval increase is reduced.

• Journal of Advanced Navigation Technology
• /
• v.19 no.3
• /
• pp.199-206
• /
• 2015

For real-time precise positioning, IGS provides ephemeris predictions (IGS ultra-rapid, IGU) and real-time ephemeris estimates (real-time service, RTS). Due to the RTS data latency, which ranges from 5 s to 30 s, a short-term prediction process is necessary before applying the RTS corrections. In this paper, the real-time performance of the RTS correction and IGU prediction are compared. The RTS correction availability for the GPS satellites observed in Korea is computed as 99.3%. The RTS correction is applied to broadcast ephemeris to verify the accuracy of the RTS correction. The 3D orbit RMS error of the RTS correction is 0.043 m. Prediction of the RTS correction is modeled as a polynomial, and then the predicted value is compared with the IGU prediction value. The RTS orbit prediction accuracy is nearly equivalent to the IGU prediction, but RTS clock prediction performance is 0.13 m better than the IGU prediction.