• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.63.1-63.1
• /
• 2020

We investigate the effect of recent star formation (RSF) on the α-elements-to-iron ratio ([α/Fe]) estimation for galaxies. Measuring galactic [α/Fe] is a powerful tool to pinpointing the timescale of chemical evolution and star formation. Our working hypothesis is that, with increasing stellar surface temperature, absorption equivalent width (EW) of α-elements decreases faster than that of Fe-peak elements, and thus RSF will lower the line ratio of EW(α)/EW(Fe). Moreover, young stars outshine, effectively lowering EW(α)/EW(Fe) of integrated light of RSF galaxies. Here we test our hypothesis using SDSS (optical spectrophotometric), GALEX (UV photometric) and IllustrisTNG datasets, and show that, if RSF is not considered thoroughly, EW(α)/EW(Fe) lowered by RSF can be routinely misinterpreted as low [α/Fe]. We discuss possible implications of the result in the context of the conventional [α/Fe]-mass relation of galaxies.

• Analytical Science and Technology
• /
• v.31 no.6
• /
• pp.240-246
• /
• 2018

The present study analyzed standard samples of three types of aluminum matrix certified reference materials (CRM) using GD-MS. Calibration curves were constructed for 13 elements (Mg, Si, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Ga, Sn, and Pb), with the slope representing the relative sensitivity factor (RSF). The x- and y-axes of the calibration curve represented ion beam ratio (IBR) and the authenticated value of the standard sample, respectively. In order to evaluate precision and linearity of the calibration curve, RSD and the coefficient of determination were calculated. Curve RSD for every element reflected high precision (within 10 %). For most elements, the coefficient of determination was ${\geq}0.99$, indicating excellent linearity. However, vanadium, nickel, and gallium curves exhibited relatively low linearity (0.90~0.95), likely due to their narrow concentration ranges. Standard RSF was calculated using the slope of the curve generated for three types of CRM. Despite vanadium, nickel, and gallium exhibiting low coefficients of determination, their standard RSF resembled that of the three types of CRM. Therefore, the RSF method may be used for element quantitation. Standard iron matrix samples were analyzed to verify the applicability of the aluminum matrix standard RSF, as well as to calculate the RSD-estimated error of the measured value relative to the actual standard value. Six elements (Al, Si, V, Cr, Mn, and Ni) exhibited an RSD of approximately 30 %, while the RSD of Cu was 77 %. In general, Cu isotopes are subject to interference: $^{63}Cu$ to $^{54}Fe^{2+}-^{36}Ar$ and $^{65}Cu$ to $^{56}Fe-Al^{3+}$ interference. Thus, the influence of these impurities may have contributed to the high RSD value observed for Cu. To reliably identify copper, the resolution should be set at ${\geq}8000$. However, high resolutions are inappropriate for analyzing trace elements, as it lowers ion permeability. In conclusion, quantitation of even relatively low amounts of six elements (Al, Si, V, Cr, Mn, and Ni) is possible using this method.

• Preventive Nutrition and Food Science
• /
• v.17 no.1
• /
• pp.36-45
• /
• 2012

To produce novel cheese-like fermented soybean, the solid-state fermentation of roasted soybean flour (RSF) was performed using 1.0% inoculum Bacillus subtilis HA and Lactobacillus plantarum, with the initial 60% substrate moisture for 10 hr at $42^{\circ}$, resulting in pH 6.5, 0.82% acidity, 3.5% mucilage, 14.3 unit/g protease activity, 7.6 unit/g fibrinolytic activity, 216 mg% tyrosine content and $1.7{\times}10^{10}$ CFU/g of viable cell counts. After the second lactic acid fermentation with 10~30% skim milk powder, the fermented RSF resulted in an increase in acidity with 1.64~1.99%, tyrosine content with 246~308 mg% and protease activity in the range of 5.2~17.5 unit/g and 0.966 water activity. Viable cell counts as probiotics indicated $1.6{\times}10^8$ CFU/g of B. subtilis and $7.3{\times}10^{10}$ CFU/g of L. plantarum. The firmness of the first fermented RSF with 2,491 $g{\cdot}{\o}mm^{-1}$ greatly decreased to 1,533 $g{\cdot}{\o}mm^{-1}$ in the second fermented RSF, although firmness was slightly increased by adding a higher content of skim milk. The consistency of the second fermented RSF also decreased greatly from 55,640 to 3,264~ 3,998 in the presence of 10~30% skim milk. The effective hydrolysis of soy protein and skim milk protein in the fermented RSF was confirmed. Thus, the second fermented RSF with a sour taste and flavor showed similar textural properties to commercial soft cheese.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.4
• /
• pp.323-332
• /
• 2010

Petroleum-based adhesive resins have extensively been used for the production of wood panels. However, it is necessary to develop environmentally friendly adhesive resins due to the increase of manufacturing cost and the environmental issue, such as the emission of volatile organic compounds, of the pertroleum-based adhesive resins. This study was conducted to formulate environmentally friendly adhesive resins using by rapeseed flour (RSF), which is the by-product of bio-diesel produced from rapeseed, for replacing petroleum-based adhesives with them. To formulate RSF-based adhesive resins, RSF was hydrolyzed in de-ionized water, 1% and 3% sodium hydroxide solutions. As a crosslinking agent, PF prepolymers were prepared with 1.8, 2.1 and 2.4 mol formaldehyde and 1 mol phenol (1.8-, 2.1- and 2.4-PF), and then mixed with RSF hydrolyzates to complete the formulation of RSF-based adhesive resins. The RSF-based adhesive resins were applied to fabricate 3-ply plywood panels. The solid content of RSF-based adhesive resins were ranged from 26.08% to 36.12% depending on the hydrolysis condition of RSF and PF prepolymer type with a high viscosity. The tensile shear strength and wood failure of plywood fabricated with RSF-based adhesive resins exceeded a minimum requirement of KS standard for ordinary plywood regardless of the hydrolysis condition of RSF and PF prepolymer type. Formaldehyde emissions of the plywood panels fabricated with 1.8-PF and RSF hydrolyzates were lower than that of E0 specified in the KS standard. Based on the results, RSF might be used as a raw material of environmentally friendly adhesives for the production of plywood panels, but further researches - the increase of solid content of RSF-based adhesives for reducing press time and the microscopic observation of plywood specimen for identifying the relationship between tensile shear strength and the penetration of adhesives into wood structure - are required to commercialize the RSF-based adhesives.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.8
• /
• pp.1118-1125
• /
• 2003

Research was carried out to clarify whether a suppression of dry forage intake during the early stages of feeding in ruminants is caused by feeding induced hypovolemia which is produced by the accelerated secretion of parotid saliva. Goats with a parotid fistula were fed roughly crushed alfalfa hay cubes, commercial ground concentrate feed and $NaHCO_3$ twice daily (10:00-12:00, 16:00-18:00). The animals were free access to drinking water all day prior to, during and after experiments. The animals were intraruminally infused every day prior to the morning feeding period with parotid saliva collected from the parotid fistula over a 24 h period. The present experiment consisted of two treatments, non-infusion (RNI) and intraruminal infusion of parotid saliva (RSF). In the RSF treatment, 4-5 kg of parotid saliva (280-290 mOsm/l) collected over a 24 h period was intraruminally infused 1 h prior to the commencement of the morning feeding. During feeding, eating and parotid saliva secretion rates were measured. Blood samples were also periodically collected from the jugular vein. During and after 2 h feeding, water intakes were measured, respectively. These measurements were used to define thirst levels. It is thought that rumen fill in the RSF treatment was higher than the RNI treatment. Plasma osmolality in the RSF treatment increased in the first half of the 2 h feeding period due to the intraruminal infusion of parotid saliva. Therefore, parotid saliva secretion rates in the RSF treatment were lower than the RNI treatment for 30 min period from 30 to 60 min after the commencement of feeding. On the other hand, plasma total protein concentration and hematocrit in the RSF treatment decreased by 3.2 and 3.3% prior to the commencement of feeding due to the intraruminal infusion of parotid saliva. In the first half of the 2 h feeding period, plasma total protein concentration and hematocrit in the RSF treatment showed a tendency to decrease compared to the RNI treatment. Thirst level in the RSF treatment during feeding was approximately 31.3% less than the RNI treatment. Upon the completion of the 2 h feeding period, cumulative feed intake in the RSF treatment was significantly larger (19.7%) than the RNI treatment. The results suggest that a suppression of dry forage intake during the early stages of feeding in goats is partly caused by feeding induced hypovolemia, which is produced by the accelerated secretion of parotid saliva.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.4
• /
• pp.614-617
• /
• 1994

This study was undertaken to determine the changes in amino acids, amylose and mineral contents of Jeolpyons(Korean rice cake) supplemented with various levels of roasted soybean flour (RSF). Amino acids content of Jeolpyons increased as RSF content increased. Especially the contents of total essential amino acids of Jeolpyon supplemented with RSF(5, 10, 15 and 20%) increased 1.22 to 2.74 times greater than those of the ocntrol. Amylose, which is related to retrogradatin effect on rice products decreased about 0.9 to 4.7% by increasing the soybean flour contents. Mineral contents by jeolpyon containing RSF increased as RSF contents increased.

• Journal of the Korean Vacuum Society
• /
• v.10 no.2
• /
• pp.225-233
• /
• 2001

Distortion of Secondary Ion Mass Spectrometry(SIMS) depth profile, which is usually observed when the analysis is made using oxygen flooding on the surface of Si with oxide on it, has been corrected. The origin of distortion has been attributed to depth calibration error due to sputter rate difference and concentration calibration error due to relative sensitivity factor(RSF) difference between $SiO_2$ and Si layers, In order to correct depth calibration error, artifact in analysis of sodium ion on oxide was used to define the interface in SIMS depth profile and oxide thickness was measured with SEM and XPS. The differences of sputter rate and RSF between two layers have been attributed to volume swelling of Si substrate occurred by oxygen flooding induced oxidation. The corrected SIMS depth profiles showed almost the same results with those obtained without oxygen flooding.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.33.3-34
• /
• 2016

We explored the GALEX UV properties of optical red sequence galaxies in 4 rich Abell clusters at z ~ 0.1. In particular, we tried to find a hint of merger-induced recent star formation (RSF) in red sequence galaxies. Based on the NUV - r' colors of the galaxies, about 36% of the post-merger galaxies were classified as RSF galaxies with a conservative criterion (NUV - $r^{\prime}{\leq}5$), and that number was doubled (~ 72%) when using a generous criterion (NUV - $r^{\prime}{\leq}5.4$). Post-merger galaxies with strong UV emission showed more violent, asymmetric features on the deep optical images. Also it turned out that all massive RSF galaxies (Mr' < -22 and NUV - $r^{\prime}{\leq}5$) exhibited post-merger signatures. Our results suggested that only 30% of RSF red sequence galaxies show morphological hints of recent galaxy mergers. This implies that internal processes (e.g., stellar mass-loss or hot gas cooling) for the supply of cold gas to early-type galaxies may play a significant role in the residual star formation of early-type galaxies at a recent epoch.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.411-414
• /
• 2004

본 연구에서는 RPP(Randomized Pulse Position PWM)의 특징과 RSF(Random Switching Frequency PWM)의 특징을 모두 갖는 하이브리드 RPWM (Random PWM)기법을 제안하였다. 제안된 방법은 PRBS(Pseudo-Random Binary Sequence)로 동작하는 시프트 레지스터의 lead-lag 랜덤 비트를 사용한다는 점에서 종전의 방법과 동일하나, 이와 논리적인 비교를 위해 랜덤 주파수의 삼각파를 이용한다는 점에서 종전의 방법과 다르다. 본 연구의 타당성을 확인하기 위하여 인버터 기반의 3상 유도모터 구동시스템에 제안된 방법을 적용하였다. 그 결과 종전의 방법에 비하여 인버터 구동 유도모터의 전압 및 전류의 고조파 스펙트럼의 광 대역화에 탁월한 효과가 있음을 입증할 수 있었다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.08a
• /
• pp.427-431
• /
• 1998

스테레오, MIDI, MP3 등등의 신호를 입력으로 하여 음상의 공간감, 거리감, 방향감, 확산감, 위치감 등이 지각을 느끼게 하는 공간적 현장감 시스템을 제안한다. 본 제안은 2채널로 기록된 매체를 2채널 또는 다채널로 표현이 가능하며 영상과 더불어 두 개의 스피커만으로도 입체 음향을 즐길 수 있다. 음악의 경우는 장르에 따라 각각의 특징을 가지고 있다. 그러한 특징은 위치감과 방향감에 의해 음장의 형태를 구현하고 공간감 거리감을 부과하므로 입체 음장 구현을 도모한다. 그리고 확산감을 부과하므로써 실조화 공간 음장을 구현할 수있다. 본 논문은 특정한 음색을 변화하기 위하여 이퀄라이저를 이용할 필요가 없으며, 다양한 음장 형태를 DSP를 이용 알고리즘화 하여 구현하던 것을 본 RSF는 아날로그 방식으로 구현하므로써 노이즈 측면과 PCB 패턴 부분 고려등을 고려하지 않고도 구현할 수 있다.