• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.819-825
• /
• 2003

The purpose of this study is to develop the speaker recognition system which can select one of operating modes in FES for general paralysis patients. As spiral injury by traffic accident, industrial disaster, or stroke has been increased, the development of FES(Functional Electrical Stimulator) system is urgent to prevent paralysis and atrophy, and to assist the patients walking. For these patients we developed FES system(1). To operate this system one of several operating modes must be selected. As this can not be done by general paralysis patients, an attempt has been tried in this study to select the mode by speaker recognition system. RSC-300 of sensory co. has been chosen as a speaker recognition chip, and PIC16F84 is adapted to interface RSC-300 and FES system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1687-1694
• /
• 2014

Recently FRP of carbon fibers is utilized as a repairing and reinforcing material for concrete structures. In this study, the bond performance between CFRP planks and ductile fiber reinforced cementitious composites was evaluated in order to develop a new system of concrete bridge deck to take advantage of the FRP planks of carbon fiber using as a permanent formwork. In order to strengthen the bonding between the FRP and cast-in-place concrete, an epoxy resin circulated in the market generally was fitted with a silica sand. The bond stress of ordinary concrete appeared in 2.11~5.43MPa and the bond stress of ductile fiber reinforced cementitious composites DC1 (RF4000) and DC2 (PP) respectively were 3.91~5.60MPa, 2.92~5.21MPa and the average bond stress of DC3 (RF4000+RSC15) and DC4 (PP+RSC15) were 4.80~5.58MPa, 5.57~5.89MPa.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.1
• /
• pp.27-32
• /
• 2009

The main objective of this study is to develop a test for measuring the bond shear strength between pavement layers. The research is also conducted to evaluate tack coat materials and application rate in porous pavement. The experiment includes using two types of emulsions (RSC-4, Modified Emulsion) and a asphalt binder type (HM-1). HM-1 was developed to be applied in porous pavement. The bond shear strengths were measured by a direct shear type device under various test conditions. The shear strength may not be appropriate in the evaluation of the bond shear strength, while the toughness of the test may be useful. In case of the tack coat application rate in porous pavement, RSC-4 has to be used a minimum amount of $0.8l/m^2$ and modified emulsion asphalt has to be applied a volume of use $0.5{\sim}0.6l/m^2$. HM-1, asphalt cement type, is far stronger bond shear strength than emulsified asphalt tack coat and had showed the excellent trackless property.

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.3
• /
• pp.281-290
• /
• 2011

In this study, a series of experiments were carried out to measure temporal stability of reduced sulfur compounds (RSCs) in Tedlar bag samples as a function of elapsed storage time. To this end, temporal variability of 4 RSC standard gases ($H_2S$, $CH_3SH$, DMS, DMDS) was measured up to 29 days. For the purpose of comparison, RSC samples were stored in both individual and mixed state. In the case of mixed standard, samples were also examined to allow comparison between light and dark condition. Then results of $CH_3SH$ data were the most stable with the least change in its concentrations through the end of exps (29 days). When compared with previous studies, the extent of stability appeared to be influenced by the initial concentration levels of samples. When the patterns were compared between individual and mixture samples, differences were not significant in the case of $H_2S$ and DMS. The effects of light conditions on temporal stability were seen to be fairly sensitive on most RSC other than $H_2S$. The results of our study confirm that the stability of RSC storage is affected by their involvement in photochemical reactions.

• International Journal of Highway Engineering
• /
• v.20 no.3
• /
• pp.1-9
• /
• 2018

PURPOSES : In order to evaluate a crack resistance at cold joint, sealing tape was adopted to apply at cold joint instead of typical tack coat material(RSC-4). The sealing tape was made by hot sealing material. The crack resistance as function of environmental and traffic loading was measured with visual observation. METHODS : In this study, the crack resistance was evaluated as function of environmental and traffic loading. The freeze-thaw method was adopted for environmental loading of asphalt pavement. condition. The damage of cold joint under freeze-thaw action is initiated by ice expansion load and accelerated by the interfacial damage between new and old asphalt pavement. The traffic loading was applied with wheel tracking machine on the cold joint area of the asphalt pavement for 3 hours at $25^{\circ}C$. The evaluation of crack resistance was measured with visual observation. The freeze-thaw results shows that the sealing tape was significantly increased the crack resistance based on. RESULTS : To estimate the crack resistance at cold joint area due to the environmental loading, the Freeze-thaw test was conducted by exposing the product to freezing temperature(approximately $-18^{\circ}C$) for 24 hours, and then allowing it to thaw at $60^{\circ}C$ for 24 hours. The tack coat material(RSC-4) was debonded after 21 cycles of the Freeze-thaw test. The first crack was observed after 14 freeze-thaw cycle with RSC-4 material. But, the sealing tape was not debonded after 24 cycle test. Also, the sealing tape shows the better performance of the crack resistance under the traffic loading with wheel track test. The crack was generated the under traffic loading with RSC-4(tack coating), however, the crack was not shown with sealing tape. It indicates that the sealing tape has a strong resistance of tensile stress due to traffic loading. CONCLUSIONS :Based on limited laboratory test result, a performance of crack resistance using the sealing tape is better than that of general tack coat material(RSC-4). It means that the sealing tape is possible to extend a pavement service life because the crack, one of the main pavement distresses, will be delayed.

• Industrial Engineering and Management Systems
• /
• v.16 no.1
• /
• pp.1-21
• /
• 2017

This paper discusses a reverse supply chain (RSC) which consists of the process flows from procurement of used products collected from a market, through remanufacturing products from the used products, to sales of the products in a market. In general, it is conceivable for the RSC to face the uncertainty in quality of used products collected from a market. Inspection is one of efficient methods to deal with the problem regarding quality of used products. However, there is a trade-off between inspection cost and inspection accuracy. This paper focuses on the following five types of inspection: (1) 100% inspection, (2) sampling inspection, (3) sampling inspection with screening of rejected lots, (4) sampling inspection with screening of acceptable lots, and (5) no inspection, and determines the optimal operation consisting of the optimal number of procured used products and the optimal inspection policy. Numerical analysis clarifies not only how changes of conditions of the RSC affect the manufacturer's optimal operation but also features of each inspection type. In addition, from the results of numerical analysis, this paper shows the usability to add the proposed inspection in this paper, the sampling inspection with screening of acceptable lots, to choices of inspection type.

• Radiation Oncology Journal
• /
• v.7 no.2
• /
• pp.293-297
• /
• 1989

Electron contamination due to the interaction between radiation beam and material was analyzed for the factors such as source-skin distance (SSD), field size, tray characteristics and position of filter, which can affect the surface dose in Cobalt teletherapy. Surface dose in open beam was more influenced by SSD with increasing field size. Relative surface charge (RSC) increased with the use of tray (solid, circular hole, slotted), compared with open beam, which is thought to be due to increased electron contamination of the tray. To reduce the surface dose, 0.4mm thick Lipowitz metal filter was used. Compared with open beam, RSC decreased by 8.8%, 11.3%, 13.3%, 16.6%, 19.3% and 21.7% for the field size of $5{\times}5$, $10{\times}10$, $15{\times}15$, $20{\times}20$, $25{\times}25$ and $30{\times}30cm^2$, respectively. On the contrary, use of Lipowitz metal filter increased RSC at 60cm or less SSD. Surface dose was effectively reduced with Lpowitz metal filter placed right below solid tray in Cobalt teletherapy.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.6
• /
• pp.512-522
• /
• 2009

In this study, the removal efficiency of trimethylamine (TMA) and four reduced sulfur compounds (RSC) of $H_2S$, $CH_3SH$, DMS, and DMDS was investigated using deionized water as absorbent. To this end, two types of experiments were conducted which include: (1) by passing both RSC and TMA standard gases through water contained in an impinger system and (2) by passing TMA gases through a water spray system. In the former method, TMA standard gases were effectively removed (below detection limit) in all experiments. Likewise, minor fractions of some RSC ($CH_3SH$, DMS, and DMDS) were removed by water in line with theoretical expectations. In addition, the first type of our experiment was extended further to test some commercially available odor treatment products. The results of this test showed that removal efficiencies of RSC $(8.2\pm13.7\sim43.7\pm2.48%)$ were different significantly among 4 kinds of absorbent, while the removal of TMA was consistently good as water. In the second phase of experiment, removal efficiency of TMA was tested by passing its standard gas through a water spray system. The overall results of our study showed that the actual removal efficiency of odorants by water (as sorptive media) approached the values that can be predicted theoretically (by Henry's law).

• Parasites, Hosts and Diseases
• /
• v.35 no.4
• /
• pp.271-276
• /
• 1997

We tried to compare the three kinds oi Metagonimur species. M. Wokognulci, Ifetafonimus Miyata type, and M. tnknhashii, which were Know to be distributed in Korea with polymerase chain reaction based-restriction fragment length polymorphism (PCR- RFLP) patterns. We amplified the internal transcribed spacer 1 (ITSI) site of ribosomal RNA and mitochondrial cytochrome c oxidase I (mCOI) gene. The restriction patterns of ITSI gene loth Rsc I, ALu I and Msp I showed multiple fragmented bands of different sizes between three kinds of Metcgonimus. In case of mc01 gene, Rsc I and Alu I enzymes produced differentially fragmented band patterns. According to the parsimony analysis of PCR-RFLP patterns, the estimated genetic divergence between M Wokognwai and Metasoninus Miyata type was 0.034880, between Metusoninus Miyata type and M. tckc- hushii was 0.028098, between M. wokogawai and M. tnkahashii was 0.018179. It is suggested that Metasonimus Miyata type may be separate species and evolutionize at the older time than the other two species.

• Journal of the Korean Society of Costume
• /
• v.33
• /
• pp.143-156
• /
• 1997

와관과 실체의 갈등은 문학작품의 주제 중에서 가장 보편적이면서도 복잡한 양상을 지니고 있다 희곡 Macbeth에 있어서 이주제는 Shakespeare의 어느 작품에서보다도 핵심적인 역할을 하며 특히 외관과 실체의 주제를 시각적으로 보여주는 복식이미저리는 그의 주제를 상징적으로 나타내는 데 효과적일 뿐만 아니라 극적 분위기 창조 및 무대사에서배우들의 의상변화로 인한 시각적이미저리 효과를 극대화 시키고 있다 본 연구의 목적은 Macbeth에 내재된 복식 이미저리를 고찰하고 이를 가장 최근에 공연된 macbeth의 무대의상에 적용 분석함으로써 무대의상 제작시 복식 이미저리의 효과적인 무대적용 여부를 파악하는 것이다.연구의 방법은 먼저 이론적인 배경으로 희곡 Macbeth의 본문을 분석하여 복식이미지저리와 관계된느 대사 및 지문 등을 추출한 다음이를 하나의 케이스 연구대상으로 선정된 1996 RSC극단 공연의 Macbeth 무대의상에 적용하여 분석 고찰 하였다 본 연구에서 얻어진 결론은 다음과 같다 첫째 자신의 실체를 파악하지 못한 인물이나 혼동하는 인물은 자신의 신분에 맞지 않은 남의 의상을 적응기간조차 없이 착용함으로써 결국은 자신을 파멸로 몰고가는 복식 이미저리가 제시되어 있었다 둘째 자신의 실체를 분명히 지각하고 있는 인물들은 새로운 복식이나 신분에의 적응은 많은 시간과 노력을 요한다는 것을 매우 잘 파악하고 있었으며 이것은 그들의 대사 중에 구체적으로 제시되어있었다 1막1장의 Banquo 의 대사 중에 나오는'새로운복식'과 '새로운 신분'에 비유 2막 4장의 macduff의 대사중에 나오는 '새로브'와 '헌로브'의 비유 5막 2장의 Caithness의 '자제력의혁대'등의 비유는 복식이미저리의 구체적인 표현으로 분석되었다. 셋째 복식 이미저리의 측면에 1996 RSC의 Macbeth 무대의상을 분한 결과 이의상들에는 '난쟁이가 훔쳐 입은 거인의 옷' 으로 대표되는 복식 이미저리가 직접적으로 제시되지는 않았지만 공연전체를 통하여 무대장치 및 의상에 변화를 주지 않음으로써 이 작품의 초시한성과 복식이미저리를 오히려 역설적으로 표현하고 있는 것으로 파악되었다. 따라서 이공연의 의상 계획은 복식 이미저리의 역설적인 한 표현으로 분석되었으며 관객에게 등장인물의 외곤은 그 실체를 그대로 반영한다는 Shakespeare 본래의 의도를 잘 보여주는 의상계획으로 파악되었다 이러한 결과는 Shakespeare극의 무대의상 디자인 및 제작시 무대의상이 단순한 무대의상 그 이상의 의미로 고려되어져야 함을 보여주며 이는 관객에세 의미 깊은 메시지로 전달될 수 있을 것으로 사료된다.