• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.942-945
• /
• 2005

This paper tried to analyze the collection and management method of shop-floor information for development of digital framework in u-manufacturing. In detail, the shop-floor information collection method through the direct communication with manufacturing devices using network Including RS-232C/422, field bus and ethernet is analyzed and proposed. In case the direct communication is impossible, the information collection method through additional sensors or data acquisition units is analyzed and proposed. Moreover, the collection method through bar code reader or touch screen of operators is analyzed and proposed to act up to machine to man/mobile/machine.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12spc
• /
• pp.409-414
• /
• 2021

Geographic Information Systems (GIS) is considered to be one of the most important technologies provided by the Internet in our era. GIS enables institutions and individuals to plan and make decisions in many fields. GIS assists in accessing new and updated information on planning process. GIS also enables determining distances such as length, width, area on a map, and allows analyzing and processing a large amount of data for the search of geographical characteristics of locations. This paper explains the concept of dispensing prescription through the specific code of drug on an electronic system using GIS technology. The proposed methodology aims to inform patients of all the prescriptions dispensed and to help individuals inquiring about prescription at the nearest pharmacy through GIS technology. This proposed methodology is considered significant in some cases, as the patient does not know price, specifications and pharmacy location where the drug required is available, thus increasing the time and effort cost that is spent searching for the prescription.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.05a
• /
• pp.120-122
• /
• 2020

원전에 대한 사이버위협이 지속됨에 따라 IAEA 및 각국에서는 원전 사이버보안 강화를 위해 노력하고 있다. 그 일환으로 국내에서는 규제기준 KINAC/RS-015를 통해 원전 내 안전·보안·비상대응 기능과 관련된 필수디지털자산에 대한 사이버보안 규제를 수행하고 있으나 원전 사고와 직접적으로 관련된 자산에 대해서는 보다 강화된 보안조치를 적용하여 보안성을 높이고자 한다. 이러한 강화 조치의 하나로 '코드 난독화 적용'이 있으며 이에 대해 상세히 살펴보고자 한다.

• Aerospace Engineering and Technology
• /
• v.13 no.1
• /
• pp.55-62
• /
• 2014

FTSR(Flight Termination System Receiver) is a device that receives a ground command signal to abort a flight mission when abnormal conditions occur in the space launch vehicle. The secure tone command message shall consist of a series of 11 character tone pattern. Each character consists of the sum of two tones which taken from a set of 7 tones defined by IRIG(Inter-Range Instrumentation Group) in the audio frequency range. The MHA(Modified High alphabet) command adds a security feature to the secure tone command by using the predefined difference code. In order to check the function and performance of MHA FTSR, which is under development, for KSLV-II, the testbed should have functions of RF signal generation, receiver's output port monitoring, RS-422 communication and test data management. In this paper, we first briefly introduce MHA command and FTSR interface, and then show the LavVIEW based testbed include its H/W configuration, S/W implementation and test results.

• Fire Science and Engineering
• /
• v.26 no.1
• /
• pp.74-79
• /
• 2012

This study is described for development of the stand-alone smoke and heat detector (SASHD) according to the revised in 2011 type approval and performance inspection code for detector. The main improvement of the revised regulation is source. CMOS microcontroller with nano watt technology is use for development of the workable SASHD over 10 years. The low-power SASHD is developed by using the power-saving sleep mode of microcontroller, by making the low-power source voltage checker, heat detector and smoke detector. The stand-alone detector is developed by smoke and heat detector type for reduce false fire alarm. User can choose type of work between the heat detection mode and smoke & heat detection mode. The SASHD can communicate with each them using RS-485 communication supported from microcontroller. So, this study can develop the SASHD that is able to alarm more wide area when fire occurs and reduce a flash fire alarm.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.11
• /
• pp.115-120
• /
• 2005

This paper describes the design and implementation of engineering model(EM) of Mass Memory Unit(MMU) for Science and Technology Satellite 2(STSAT-2) and the results of integration test. The use of Field-Programmable Gate Array(FPGA) instead of using private electric parts makes a miniaturization and lightweight of MMU possible. 2Gbits Synchronous Dynamic Random Access Memory(SDRAM) module for mass memory is used to store payload and satellite status data. Moreover, file system is applied to manage them easily in the ground station. RS(207,187) code improves the tolerance with respect to Single Event Upset(SEU) induced in SDRAM. The simulator is manufactured to verify receiving performance of payload data.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.3
• /
• pp.246-252
• /
• 2018

Recent studies have been received much attention on underwater laser communication, which is capable of high data rate. However, in underwater laser communication, distortions caused by absorption and scattering induced performance degradation. A typical way to improve performance is to apply channel coding technique. In the beginning of studies, simple methods such as RS and BCH coding techniques were applied. However, due to distance expansion and performance improvement, channel coding methods with low error probability such as LDPC coded method were applied. In this paper, we analyzed the performance according to the size of the code word N, the distance between the transceivers and the size of the M of the M-ary PPM modulation scheme. Simulation results show that parameter M of M-ary PPM is most effect on performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.690-694
• /
• 2007

This study provide Car driver with car sensor information which is car trouble code in engine and many sensors. This provide car manager with many information of tar sensors when we go to vehicle maintenance. This system consist of embedded linux system which uses RS232 and EML327 for CAN communication of car system. This System can control digital appliances in home network using wireless and ZigBee. Finally this is a lot of application for embedded linux system which get sensor informations of car control sensor system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.131-138
• /
• 2023

In this paper, a free space optical communication device that can be used in a mobile base station of several km or less was fabricated and its characteristics were investigated. To overcome the loss due to atmospheric transmission, an optical fiber amplifier (EDFA) with an output of 23 dBm or more was used. In order to increase the focusing speed and miniaturization of the laser beam, an optical lens was manufactured, and a transmission lens was designed to have beam divergence within the range of 1.5 to 1.8 [mrad]. A PT module that controls PAN/TILT was fabricated in order to reduce pointing errors and effective automatic alignment between transceiver devices. In this study, Reed-Solomon (RS) code was used to maintain the transmission quality above a certain level. It was manufactured to be able to communicate at a wireless distance of 300m in a weather situation with visibility of 300m. For performance measurement, it was measured using BERT and eye pattern analyzer, and it was confirmed that BER can be maintained at 2.5Gbps.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1332-1339
• /
• 2001

SoC(System on Chip) technology is widely used in the field of embedded systems by providing high flexibility for a specific application domain. An important aspect of development any new embedded system is verification which usually requires lengthy software and hardware co-design. To reduce development cost of design effort, the instruction set of microprocessor must be suitable for a high level language compiler. And FPGA prototype system could be derived and tested for design verification. In this paper, we propose a 16 bit FPGA microprocessor, which is tentatively-named EISC16, based on an EISC(Extendable Instruction Set Computer) architecture for embedded applications. The proposed EISC16 has a 16 bit fixed length instruction set which has the short length offset and small immediate operand. A 16 bit offset and immediate operand could be extended using by an extension register and an extension flag. We developed a cross C/C++ compiler and development software of the EISC16 by porting GNU on an IBM-PC and SUN workstation and compared the object code size created after compiling a C/C. standard library, concluding that EISC16 exhibits a higher code density than existing 16 microprocessors. The proposed EISC16 requires approximately 6,000 gates when designed and synthesized with RTL level VHDL at Xilinix's Virtex XCV300 FPGA. And we design a test board which consists of EISC16 ROM, RAM, LED/LCD panel, periodic timer, input key pad and RS-232C controller. 11 works normally at 7MHz Clock.