• Journal of Biosystems Engineering
• /
• 제9권2호
• /
• pp.1-7
• /
• 1984

The engines mounted on power-tillers are used as power source in various kinds of works such as plowing, harrowing, transporting, spraying, water pumping and threshing, etc. But the engines have not been used effectively from a standpoint of fuel consumption because of lack of proper power transmission system and lack of understanding of fuel consumption characteristics of the engines. Therefore, this study was attempted to establish proper power transmission system between the power-tiller engines and various implements. In order to accomplish the above objective, firstly, power requirement and pulley sizes for various implements, which are driven by the power-tiller engines, were investigated to find out whether the power transmission system is proper. Secondly, partload variable engine-speed test was conducted for 3 different sizes of diesel engines to measure to specific fuel consumption. Thirdly, the present power transmission systems were analyzed in terms of specific fuel consumption, and proper power transmission systems were suggested for various implements. The results of this study are summarized as follows: 1. Power requirement for each fixed-type implement of power-tiller varied from 1.5 ps to 11 ps according to its type and operating conditions, but generally in the range of 2.5 ps to 7 ps. 2. Each power tiller and implement were equipped with only one size of pully with few exeptions. With the present power transmission systems, the engines can't be utilized effectively in terms of fuel economy. The pulley size of engine or implement should be diversified to provide the optimum engine speed for different implements. 3. For a diesel eninge with the rated power output of 6 ps, the optimum engine speed to minimize specific fuel consumption was 2200 rpm for the power reguirement in the range of 6 ps or more, 1700 rpm in the range of 4 to 6 ps, and 1200 rpm in the range of 4 ps or less. 4. For a diesel engine with the rated power output of 8 ps, the optimum engine speed was 2200 rpm for the power requirement in the range of 7 ps or more, 1700 rpm in the range of 4.8 to 7 ps, and 1200 rpm in the range of 4.8 ps or less. 5. For a diesel engine with the rated power output of 10 ps, the optimum engine speed was 2200 rpm for the power requirement in the range of 8.4 ps or more, 1700 rpm in the range of 5.4 ps to 8.4 ps, and 1200 rpm in thr range of 5.4 ps or less. 6. Provided the existing implements are dirven by 8 ps diesel engines, the optimum size of engine pulley should be larger than 120mm for the works of requiring less than 4 ps and 90-110mm for the works requiring 4.5-6.5 ps in order to minimize fuel consumption.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제21회 추계학술대회 논문집
• /
• pp.219-222
• /
• 2003

Turbo generator system need starter for gas turbine engine. Turbo generator has high rate gearbox for reduce rotating speed. Because a conventional generator could not operate same speed of gas turbine engine. But Recently turbo generator system is directly connected a gas turbine engine with a super high-speed generator. In this paper, starter driver are implemented direct coupled turbo generator system, Which is directly connected 100kW, 60,000rpm gas turbine engine and 25kW 60,000rpm super high speed generator.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.310-314
• /
• 1999

A prototype of Flywheel Energy Storage System with high Tc superconducting bearings was fabricated and tested to verify its applicability for the energy industry. The moment of inertia of assembled wheel with rotor magnets is about 1.072${\times}$10$^{-1}$ Kg-m$^2$. The wheel was designed to withstand its integrity up to the rotation speed of 20,000 rpm. YBCO bulk superconductors prepared by seed growth method were used as bearing to levitate and stabilize the rotating wheel. High speed rotation of the flywheel without mechanical contact was achieved by using specially designed Halbach type motor. The flywheel system showed very high stability during test operation performed up to the speed of about 10,000rpm. The energy loss measured by free decay test performed between 9,300 rpm and 7,000 rpm was calculated as about 45 W.

• 한국항해항만학회지
• /
• 제36권1호
• /
• pp.35-41
• /
• 2012

본 논문은 수중체용 냉각 시스템에 관하여 분석하고, 수중체에 최적화된 냉각 제어 알고리즘에 관하여 연구하였다. 수중체용 대용량 추진 전동기는 동손 및 철손으로 인해 발생하는 고열로부터 전동기를 안정적으로 보호하기 위해 청수를 이용한 냉각 시스템이 사용된다. 이 냉각 시스템은 전동기의 온도를 유지하기 위해 외부 환경 및 전동기의 회전수 유지시간에 따라 해수 및 청수 펌프 RPM을 조절한다. 본 논문에서는 제안하는 냉각 시스템의 검증을 위한 시뮬레이션 프로그램을 구성하였으며, 다양한 제어 기법을 적용하여 냉각 수행 능력을 검증하였다. 그 결과 제안하는 냉각 알고리즘은 열적 안정성과 효율이 기존 냉각 알고리즘에 비해 높음을 확인하였다.

• 핵의학기술
• /
• 제21권1호
• /
• pp.34-38
• /
• 2017

PET/CT 검사 시 호흡으로 인한 내부장기의 움직임은 여러 호흡주기 동안 영상화되어 종양크기는 실제보다 증가하고 SUV에도 영향을 미치게 된다. 호흡 동조 시스템들을 이용하여 종양크기와 SUV 변화 유무를 평가해보고자 한다. 장비는 Biograph mCT 64를 사용하였고 호흡 동조 시스템은 RPM과 Anzai 시스템을 사용하였다. 실험을 위해 Point source와 Micro-phantom을 환자는 2016년 8월에서 9월까지 폐 기저부 또는 간 상부에 고형종양이 확인된 환자 12명을 대상으로 호기-호흡상태에서의 PET영상과 호기 후 멈춤 상태의 CT영상을 얻어 기존 Static, RPM, Anzai방식에서의 방사능 농도(kBq/mL), SUVmax, Cylinder diameter(mm), Tumor diameter (mm) 변화 유무를 평가하였다. Point source 방사능 농도 측정 결과 Static 대비 RPM 94%, Anzai 91% 상승하였고 Micro-phantom에서 방사능량을 달리한 2개의 Cylinder에서 SUVmax값은 Static 대비 RPM 61%, 78%, Anzai 58%, 77%로 각각 상승하였고 Cylinder diameter는 RPM -26%, -28%, Anzai -28%, -26% 감소하였다. 환자의 경우 SUVmax값은 Static 대비 RPM은 최소 8.2%에서 최대 94.4%, Anzai는 최소7.6%에서 최대 68.3% 상승하였고 Tumor diameter는 RPM은 최소 -7.6%에서 최대 -28.9%, Anzai는 최소 -9.6%에서 최대 -27.7% 감소하였다. 호흡 동조 시스템 RPM과 Anzai에서 phantom study는 별 차이가 없었지만 환자의 종양에서는 유의미한 차이가 있었다(P<0.05). 호흡 동조 시스템 RPM과 Anzai는 호흡이 일정한 주기로 이루어지는 phantom study에서 별 차이가 없었지만 환자의 경우 일정하지 않은 호흡주기와 시스템간 차이 때문에 유의미한 차이가 발생함을 알 수 있었다. 하지만 호흡 동조 시스템은 기존 Static 대비 종양의 크기는 감소하고 SUV는 증가하여 정확한 진단과 SUV측정에 유용할 것으로 사료된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2058-2062
• /
• 2005

This article describes the useful way to measure the torque and RPM of the geared motor. For this, we have made the planetary geared reduction motor including the torque sensor unit which consists of hall effects sensor and permanent magnet. Our monitoring system displays the sensing values (torque, rpm) and the calculated value (power) and it also has the network capability using the Bluetooth protocol. We will show that our solution is much more inexpensive and simple method to measure torque and rpm than before.

• 오토저널
• /
• 제7권2호
• /
• pp.45-54
• /
• 1985

Recently, the problem of exhaust gas pollution is increasingly being aggravated by the active use of the Diesel engine. For the fuel-injection system which affects the composition of exhaust gas from the Bosch type single-hole nozzle in the Diesel engine, a mathematical model was set up to study pressure variations in the high pressure pipe, the injection rate, and the needle lift. The fundamental equations of the mathematical model have been solved by the Newton Raphson Method applying the Finite Diffrence Method. The effective stroke of the injection pump plunger due to a change in engine rpm was calculated by the measurement of Control Rack, Pinion, and Plunger sizes and by the use of Characteristic Curve of Governor. The computed results for the pressure variations in the high pressure pipe and needle lift at 800 rpm and 1000 rpm are in good agreement with experimental ones in general. By a developed program, the effects of other various parameters will by calculated for the performance of the fuel-injection system.

• Journal of Biosystems Engineering
• /
• 제39권4호
• /
• pp.299-303
• /
• 2014

Purpose: This study set out to develop a machine for separating shatter-resistant sesame after threshing. Methods: Three grades of sieve and different blower speeds were tested for a separation system that had been designed specifically for shatter-resistant sesame. Performance tests were run to evaluate the sieve and blower systems in terms of the sesame separation and loss ratios. Results: Tests of the first separation stage using the sieve system revealed the optimum sieve perforation size to be 5 mm. Tests of the second separation stage using the blower system identified the optimum blower speed as being 220 rpm. The optimum separation and loss ratios, of 96.5% and 3.5%, respectively, were obtained at a blower speed of 220 rpm. Conclusions: These results will be useful for the design, construction, and operation of threshing harvesters. For shatter-resistant sesame, an optimum blower speed of 220 rpm was identified.

• 한국항공우주학회지
• /
• 제39권5호
• /
• pp.442-450
• /
• 2011

회전 블레이드의 모션을 측정하기 위해 스테레오 패턴 인식 (stereo pattern recognition, SPR) 기법을 적용한 측정 시스템을 구성하고 실험을 수행하였다. 시스템 요구사항을 만족시키는 스테레오 카메라를 확보하여 SPR 기반의 측정 시스템을 준비하였다. 시스템의 측정불확도를 계산하기 위한 일련의 실험을 통해, 본 SPR 시스템이 2m~4.2m의 측정 거리에서 0.2mm 이내의 표준불확도를 가짐을 확인하였다. 이를 이용하여 계산한 블레이드 모션의 합성표준불확도는, 리드-래그, 플래핑, 비틀림 운동에 대해 각각 0.296mm, 0.209mm, $0.238^{\circ}$ 이었다. 본 SPR 시스템을 한국항공우주연구원의 소형로터 시험장치에 설치하고 회전속도와 콜렉티브 피치각을 각각 360rpm, 589rpm, 그리고 $0^{\circ}$, $4^{\circ}$, $6^{\circ}$로 바꾸어가며, 지상 제자리비행 조건에서 블레이드의 모션과 탄성 변형을 성공적으로 측정하였다. Higher Harmonic Control Aeroacoustic Rotor Test -II 에서 사용한 측정 시스템과의 비교를 통하여 본 시스템의 장점을 분석하였다.

• 한국유체기계학회 논문집
• /
• 제6권3호
• /
• pp.44-50
• /
• 2003

An experiment is conducted for measuring the performance of an air tool, which is operated at 100,000 RPM in an unloaded state with very low torque. A 551 kPa in gauge pressure is supply to the inlet of an air tool. An experimental apparatus is developed as a friction type dynamometer. Inlet total pressure, air flow rate, rotational speed and operating force are measured simultaneously. Torque, output power and specific output power are obtained with different rotational speeds. Those are compared with the experimental results which were obtained by a commercial dynamometer. However, no commercial dynamometers are available for measuring the torque above 30,000 RPM. In order to reduce the rotational speed, a reduction gear is applied between the air tool and the commercial dynamometer. Torque and power obtained by the commercial dynamometer show $55\%$ lower than those obtained by the developed friction type dynamometer, because the mass is added to the rotor of air tool for the braking system of the commercial dynamometer and power loss is generated by the reduction gear. From the compared results, the friction type dynamometer should be applied for measuring the performance of the air tool operating at low torque and high RPM.