• Journal of Magnetics
• /
• v.20 no.4
• /
• pp.439-443
• /
• 2015

A control rod drive mechanism (CRDM) is an electromechanical equipment that provides linear movement for the control rods to control the nuclear reactivity in a nuclear reactor. A rod position indication system (RPIS) detects the control rod's position. To enhance the measurement accuracy of the system, a magnetostrictive type sensor with capability of generating operation limiting signals would be adapted instead of a conventional RPIS for a CRDM. An RPIS was modelled for a numerical analysis with the permanent magnets at the stationary limit positions and magnetic shielding plates with a moving permanent magnet. The performance analysis of the RPIS were conducted, and the results were discussed here.

• Journal of the Korean Institute of Gas
• /
• v.9 no.4 s.29
• /
• pp.1-5
• /
• 2005

An investigation was made on the fatigue characteristics of type 304 stainless steel membrane manufactured by plastic working. To investigate the effect of plastic deformation, tests were performed with 5 types of specimens having different amount of plastic deformation. Fatigue tests were executed under both room and LNG temperatures $(-162^{\circ}C)$. All the test results were compared with the fatigue data provided by RPIS (Recommended Practice for Inground LNG Storage Tank). On the basis of these results, it was confirmed that RPIS's design fatigue curve could be applied to evaluate fatigue life of KOGAS membrane manufactured by pressing.

• Fisheries and Aquatic Sciences
• /
• v.19 no.3
• /
• pp.14.1-14.10
• /
• 2016

Isoelectric solubilization/precipitation (ISP) processing allows selective, pH-induced water solubility of proteins with concurrent separation of lipids and removal of materials not intended for human consumption such as bone, scales, skin, etc. Recovered proteins retain functional properties and nutritional value. Four roe protein isolates (RPIs) from yellowfin tuna roe were prepared under different solubilization and precipitation condition (pH 11/4.5, pH 11/5.5, pH 12/4.5 and pH 12/5.5). RPIs contained 2.3-5.0 % moisture, 79.1-87.8 % protein, 5.6-7. 4 % lipid and 3.0-3.8 % ash. Protein content of RPI-1 and RPI-2 precipitated at pH 4.5 and 5.5 after alkaline solubilization at pH 11, was higher than those of RPI-3 and RPI-4 after alkaline solubilization at pH 12 (P < 0.05). Lipid content (5.6-7.4 %) of RPIs was lower than that of freeze-dried concentrate (10.6 %). And leucine and lysine of RPIs were the most abundant amino acids (8.8-9.4 and 8.5-8.9 g/100 g protein, respectively). S, Na, P, K as minerals were the major elements in RPIs. SDS-PAGE of RPIs showed bands at 100, 45, 25 and 15 K. Moisture and protein contents of process water as a 2'nd byproduct were 98.9-99.0 and 1.3-1.8 %, respectively. Therefore, yellowfin tuna roe isolate could be a promising source of valuable nutrients for human food and animal feeds.

• Journal of the Korean Institute of Gas
• /
• v.6 no.4 s.18
• /
• pp.17-22
• /
• 2002

LNG demand has been rapidly increasing in Korea for a variety of reasons including stable supply, non-polluting, and high combustion efficiency characteristics. One of the most important structural core element of the LNG storage tank is the membrane, consisting of stainless steel. The membrane to be applied inside of LNG storage tank is provided with corrugations to absorb thermal contraction and expansion caused by LNG temperature. Experimental studies are presented to investigate the deformation and strength of the membrane which is designed by Kogas. All experiments are conducted on the basis of RPIS, and we found the results is fully satisfied with the RPIS.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.2
• /
• pp.162-173
• /
• 2023

Four roe protein isolates (RPIs) from olive flounder Paralichthys olivaceus roes (OFR) were recovered by isoelectric solubilization (pH 11 and 12) and precipitation (pH 4.5 and 5.5) and investigated for their food characteristics. RPIs contained 4.5-9.6% moisture, 64.1-69.5% protein, 16.1-19.8% lipid, and 1.0-3.9% ash. The protein yields of RPIs ranged from 50.1 to 56.8%, which was significantly different depending on the recovery conditions. A difference was observed in the SDS-PAGE protein band (25-100 kDa) between the alkaline solubilization at pH 11 (RPI-1 and 2) and pH 12 (RPI-3 and 4). The major amino acids of RPIs were Leu, Lys, Asp, Glu and Ala and major mineral components were sulfur, sodium, phosphorus, and magnesium, which were significantly different from OFR (P<0.05). Additionally, the lead and cadmium content was below the chemical hazard standard of the Korean food standards code. The Hunter color and whiteness of RPIs also showed significant differences according to the treatment conditions of the ISP process (P<0.05). This suggests that protein isolates recovered from olive flounder roes have high potential as nutritional supplements.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.57 no.1
• /
• pp.1-14
• /
• 2024

We investigated the functional properties and in vitro bioactivity of protein isolates (RPIs) recovered from olive flounder Paralichthys olivaceus roes by isoelectric solubilization/precipitation process, according to pH-shift treatments. The buffer capacity of RPIs was shown to be stronger in alkaline pH than in acidic pH. Water holding capacity of RPIs was in range of 4.5-5.2 g/g protein with no significant differences (P>0.05). The foaming capacity and emulsifying activity index of RPIs did not show any significant differences between RPI-1 (pH 11/4.5) and 3 (pH 12/4.5), however they were superior to RPI-2 (pH 11/5.5) and 4 (pH 12/5.5). The 2,2'-azino-bis-3-ethylbenzo-thiazoline-6-sulfonic acid radical scavenging activity of RPI-3 (2.5 mg protein/mL) was 102.4 ㎍/mL, and the angiotensin I converting enzyme inhibitory activity was 30.8%. Among the RPIs, RPI-3 was relatively superior in protein functional properties such as buffer capacity, foaming capacity, emulsification, and anti-oxidative activity. Therefore, we suggest that RPI prepared from olive flounder roes could serve as a potential food resource.

• 한국가스학회:학술대회논문집
• /
• 2005.10a
• /
• pp.193-198
• /
• 2005

An investigation was made on the fatigue characteristics of type 304 stainless steel membrane manufactured by plastic working. To investigate the effect of plastic deformation, tests were performed with 5 types of specimens having different amount of plastic deformation. Fatigue tests were executed under both room and LNG temperatures ($-162^{\circ}C$). All the test results were compared with the fatigue data provided by RPIS(Recommended Practice for Inground LNG Storage Tank). On the basis of these results, it was confirmed that RPIS's design fatigue curve could be applied to evaluate fatigue lift of KOGAS membrane manufactured by pressing.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.800-805
• /
• 2001

Both analytical and experimental studies are presented to investigate the strength of the membrane which is designed by Kogas and will be used as a sealing for a LNG tank. Kogas has already developed the Ring-Knot type membrane, but new type had yet to be developed. This paper reports on the results of investigations into this new type of membrane. Various theorical analyses using FEM and experiments are conducted on the basis of RPIS, and it is found that the RPIS is fully satisfied.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.6
• /
• pp.1203-1208
• /
• 2002

LNG demand has been rapidly increasing in Korea for a variety of reasons including stable supply, non-polluting, and high combustion efficiency characteristics. As a result the construction and expansion of LNG storage facilities have been continuing at a vigorous pace. Korea Gas Corp. (KOGAS) has developed the design technology of the LNG storage tank. One of the most important structural core element of the LNG storage tank is the membrane, made by stainless steel. The membrane to be applied inside of LNG storage tank is provided with corrugations to absorb thermal contraction and expansion caused by LNG temperature. Analytical results have been performed to investigate the strength of the membrane and the reaction farce at the anchor point. Experimental studies are performed to investigate the deformation and strength of the membrane which is designed by Kogas. All experiments are conducted on the basis of RPIS, and we found the results are fully satisfied with the RPIS.

• Journal of the Korean Magnetics Society
• /
• v.26 no.5
• /
• pp.154-158
• /
• 2016

A CRDM (Control Rod Drive Mechanism) is an electromagnetic device which drives a control rod assembly linearly to regulate the reactivity of a nuclear core. An RPIS (Rod Position Indication System) is used as a position indicator for a control rod assembly of a CRDM of SMART, and an RPIS consists of permanent magnets and reed switches. SMART is designed for the maximum coolant temperature of $350^{\circ}C$, and the permanent magnets are installed inside of the reactor. The reed switches and electrical circuit are installed outside of the reactor on the other hand. Test coil for a reed switch is test equipment for quality verification of a reed switch, and a test coil consists of a coil and core. In this study, magnetic property of test coil and permanent magnet on a reed switch is compared by using finite element electromagnetic simulation.