• International journal of advanced smart convergence
• /
• v.5 no.3
• /
• pp.56-60
• /
• 2016

Body physical technique is to pursuit the dynamic motion by the physical index(PI) and sensory index(SI) on the physical body function. Function of the physical body by the motor condition is organized the dynamic physical system. For the physical motion of signal, we is defined a runout value of the body function by the physical index on the dynamic state. The concept of body physical index was identified the reference of physical index and sensory index by the body technique. As to detect a variation of the body physical technique-runout physical index(BPT-RPI) of the maximum and average and minimum in terms of physical motion, and the dynamic sensory value that was a runout function of the vision variation of the $Vi-{\xi}_{MAX-AVG-MIN}$ with $2.53{\pm}4.85$ units, that was a runout function of the vestibular variation of the $Ve-{\xi}_{MAX-AVG-MIN}$ with ($-0.69{\pm}2.32$)units, that was a runout function of the somatosensory variation of the $So-{\xi}_{MAX-AVG-MIN}$ with ($-1.43{\pm}-1.36$) units. The dynamic physical motion will be to confirm at the variable function of the runout motion for the body function values of dynamic physical index on the BPT-RPI that was identified an evaluation of the physical sensory function by the dynamic physical system. Runout body system was mentioned of a physical body situation by the mild moving and was refer a runout data of dynamic physical nervous index.

• Horticultural Science & Technology
• /
• v.30 no.5
• /
• pp.501-508
• /
• 2012

Reducing carbon dioxide ($CO_2$) exhaust has become a major issue for society in the last few years, especially since the initial release of the Kyoto Protocol in 1997 that strictly limited the emissions of greenhouse gas for each country. One of the primary sectors affecting the levels of atmospheric greenhouse gases is agriculture where $CO_2$ is not only consumed by plants but also produced from various types of soil and agricultural ecosystems including greenhouses. In greenhouse cultivation, $CO_2$ concentration plays an essential role in the photosynthesis process of crops. Optimum control of greenhouse $CO_2$ enrichment based on accurate monitoring of the added $CO_2$ can improve profitability through efficient crop production and reduce environmental impact, compared to traditional management practices. In this study, a sensor-based control system that could estimate the required $CO_2$ concentration considering emission from soil for cucumber greenhouses was developed and evaluated. The relative profitability index (RPI) was defined by the ratio of growth rate to supplied $CO_2$. RPI for a greenhouse controlled at lower set point of $CO_2$ concentration (500 ${\mu}mol{\cdot}mol^{-1}$) was greater than that of greenhouse at higher set point (800 ${\mu}mol{\cdot}mol^{-1}$). Evaluation tests to optimize $CO_2$ enrichment concluded that the developed control system would be applicable not only to minimize over-exhaust of $CO_2$ but also to maintain the crop profitability.

• The Journal of Korean Academy of Prosthodontics
• /
• v.25 no.1
• /
• pp.17-40
• /
• 1987

The purpose of this study was to clarify the effect of clasp design on abutment tooth adjacent to a distal extension base under the influence by the location of functional loading. The RPI clasp, the Akers clasp and the combination clasp were selected for evaluation. Tests were performed at 10Kg, 20Kg, 30Kg loads on the buccal, central, lingual, mesial and distal positions of loading platform of each mandibular distal extension partial denture. The laser reflexion method was used for three dimensional measurement of abutment movement, which is possible to measure precisely without contact. The movement in the mesiodistal(X), buccolingual(Y), and occlusoapical(Z) directions and the rotational movement(R) were measured, and in addition, the total movement (SV) as expressed by the three dimensional summation vector independent of direction was calculated. The data were analyzed using Student t-test, p<.05. The following results were obtained from this study; 1. Clasp design did not generally affect the direction of abutment tooth movement except the movement in an undesirable occlusal direction in case of the Akers clasp and the combination clasp. 2. The greater the load on the prosthesis, the greater was the abutment tooth movement, and the direction of abutment tooth movement was affected by positional loading. 3. Each prosthesis was dislodged from the test base under the small amount of load in the distal load position, and the buccal loading showed the greatest abutment tooth movement under the maximum load. 4. RPI clasp was evaluated as the most favorable design.

• The KIPS Transactions:PartA
• /
• v.13A no.5 s.102
• /
• pp.405-412
• /
• 2006

Real-time operating systems have been used in various computing environments, where a job must be completed in its deadline, with various conditions, such as effective scheduling policies, the minimum of an interrupt delay, and the solutions of priority inversion problems, that should be perfectly satisfied to design and develop optimal real-time operating systems. Up to now, in order to solve priority inversion problems among several those conditions. There have been two representative protocols: basic priority inheritance protocol and priority ceiling emulation protocol. However, these protocols cannot solve complicated priority inversion problems. In this paper, we design a protocol, called recursive priority inheritance (RPI), protocol that effectively solves the complicated priority inversion problems. Our proposed protocol is also implemented in the Linux kernel and is compared with other existing protocols in the aspect of qualitative analysis.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.6
• /
• pp.133-143
• /
• 2006

A fully coupled effective stress dynamic analysis procedure for modeling seismic liquefaction on slope is presented. An elasto-plastic formulation is used for the constitutive model UBCSAND in which the yield loci are radial lines of constant stress ratio and the flow rule is non-associated. This is incorporated into the 2D version of Fast Lagrangian Analysis of Continua (FLAC) by modifying the existing Mohr-Coulomb model. This numerical procedure is used to simulate centrifuge test data from the Rensselaer Polytechnic Institute (RPI). UBCSAND is first calibrated to cyclic direct simple shear tests performed on Nevada sand. Both pre- and post-liquefaction behaviour is captured. The centrifuge test is then modeled and the predicted accelerations, excess porewater pressures, and displacements are compared with the measurements. The results are shown to be in general agreement. The procedure is currently being used in the design of liquefaction remediation measures for a number of dam, bridge, tunnel, and pipeline projects in Western Canada.

• Proceedings of the Korean Society of Food Science and Nutrition Conference
• /
• 2001.12a
• /
• pp.61-68
• /
• 2001

Soybean, rice and nuts are the staple foods in South East Asia. In order to clarify the function of these foods in relation to coronary heart diseases, we have done a series of experiments using animals and humans. Soybean protein preparations (SPI) in comparison with an animal protein, casein (CAS), resulted in reducing atherosclerotic lesion development in apolipoprotein (apo) E deficient mice that develop an advanced lesion similar to that in humans. This action was attributed to the protein, since the ethanol-extracted SPI (EE-SPI), from which isoflavones and saponins removed, lowered the lesion development in apo E-deficient mice. However, The EE-SPI, compared to the SPI, resulted in a decrease of mRNA for key proteins of cholesterol metabolism (low density lipoprotein receptor and cholesterol 7$\alpha$-hydroxylase) in hypercholesterolemic rats, followed by an elevation of the serum cholesterol level, indicating a contribution of isoflavones to the serum cholesterol level. Rice protein (RPI) was also effective to lower the lesion development in apo E deficient mice. Both the SPI and RPI led to an increased level of the serum NOiN03, metabolites of NO. This effect appeared to be attributed to their high content of arginine. Besides, C57BL/6J mice fed a diet containing whole grain rice had an elevation of the serum high-density lipoprotein cholesterol. Furthermore, rice bran oil and the unsaponifiable fraction that is rich in plant sterols were effective to lower serum cholesterol levels in hypercholeserolemic rats. Finally, we tested if walnuts consumption would be hypocholesterolemic for Japanese. A diet containing walnuts effectively lowered the serum total and low density lipoprotein cholesterol in Japanese men and women. These animal and human experiments would be relevant to advocate publics to keep consuming diets including soybean, rice and nuts for their healthful life.

• Journal of Advanced Navigation Technology
• /
• v.26 no.2
• /
• pp.119-124
• /
• 2022

The international gnss service (IGS) provides real-time service (RTS) orbit and clock correction applicable to the broadcast ephemeris of GNSS satellites. However, since the RTS correction cannot be received if the Internet connection is lost, the RTS correction should be predicted and used when a signal interruption occurs in order to perform stable precise point positioning (PPP). In this paper, PPP was performed by predicting orbit and clock correction using a long short-term memory (LSTM) algorithm in real-time during the signal loss. The prediction performance was analyzed by implementing the LSTM algorithm in RPI (raspberry pi), the processing speed of which is not high. Compared to the polynomial prediction model, LSTM showed excellent performance in long-term prediction.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4C
• /
• pp.221-230
• /
• 2008

The George Massey immersed tunnel passes the Fraser River near Vancouver, Western Canada. The tunnel was founded on sandy soils and its behavior during earthquake was analyzed by an effective stress constitutive model called UBCSAND. This model is able to calculate pore pressure rise and resulting tunnel movements due to cyclic loading. Centrifuge tests conducted at Rensselaer Polytechnic Institute (RPI) were used to verify the model performance. The centrifuge tests consisted of 2 models: Model 1 was designed for an original ground condition, Model 2 for a ground improvement by densification. In Model 1, large deformation of the tunnel was observed due to liquefaction of surrounding soil. Because of the densified zones around the tunnel the vertical and horizontal displacements of the tunnel in Model 2 was 50% less than Model 1. Measured excess pore pressures, accelerations, and displacements from centrifuge tests were in close agreement with the predictions of UBCSAND model. Therefore, the model can be used to predict seismic behavior of immersed tunnels on sandy soils and optimize liquefaction remediation methods.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.4
• /
• pp.43-51
• /
• 2007

Liquefaction-induced lateral spreading continues to be a major cause of damage to deep foundations. Currently there is a huge uncertainty associated with the maximum lateral pressures and forces applied by the liquefied soil to deep foundations. Furthermore, recent centrifuge and is shaking table tests of pile foundations indicate that the permeability of the liquefied sand is an extremely important and poorly understood factor. This article presents experimental results and analysis of one of the centrifuge tests that were conducted at the 150 g-ton RPI centrifuge to investigate the effect of soil permeability in the response of single piles and pile groups to lateral spreading.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.51-58
• /
• 2008

The George Massey immersed tunnel passes the Fraser River near Vancouver, Western Canada. In this paper, dynamic analysis of the tunnel on sandy soils was performed using an effective stress constitutive model called UBCSAND. This model is able to calculate pore pressure rise and resulting tunnel deformation due to cyclic loading. Centrifuge tests conducted at RPI are used to verify the model performance. Centrifuge tests consist of 3 models: Model 1 is designed for an original ground condition, Model 2 for a ground improvement by compaction method, Model 3 for a ground improvement by gravel drainage. The results of centrifuge Model 1 are presented and compared with predictions of UBCSAND model. This model well captured the results of centrifuge test and therefore can be used to predict dynamic behavior of similar tunnels or underground structures on sandy soils.