• Journal of Korea Water Resources Association
• /
• v.37 no.12
• /
• pp.979-991
• /
• 2004

In this study, RMA2 and RMA4, the 2-D depth-averaged models, were employed to simulate the two-dimensional mixing characteristics of the pollutants in the natural streams. The velocity and depth were first calculated using RMA2, 2-D hydrodynamic model, and then the resulting flow field was inputted to RMA4, 2-D water quality model, to compute the concentration field. RMA models were verified using the velocity and concentration data measured in S-curved meandering channel. The results showed that the RMA2 model simulated well the phenomenon that the maximum velocity line is located at the Inner bank of meandering channel, and the RMA4 model was well adapted to reproduce the general mixing behavior and the separation of tracer clouds. Comparing model simulations with measured data in the field experiments, RMA2 model simulated well general flow field and tendency that the maximum velocity line skewed toward the outer bank which were found in field experiments. The simulations of RMA4 model showed that the center of the tracer cloud tends to follow the path in which the maximum velocity occurs. In this study, the dispersion coefficients are fine-tuned based on the measured coefficients calculated using field concentration data, and the results show reasonable agreement with predictive equations.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.450-455
• /
• 1999

Unsaturated diol (UD) was prepared from the esterification of maleic anhydride with diethylene glycol (DEG). Unsaturated polyesters modified with rosin (UPMR) or with rosin maleic anhydride adduct (RMA) from 2-hydroxyethylmethacrylate (HEMA) and rosin (UPMRH) were prepared by the reaction of UD with RMA or RMA-HEMA. After crosslinking of UPMR and UPMRH with styrene and methylmethacrylate (MMA), respectively, solvent resistance, tensile strength, and adhesion property of the resins were measured. UPMR crosslinked with styrene or MMA shows an excellent resistance to water and acid. Solvents resistance and tensile strength of UPMR using styrene as crosslinking agent were increased compared with those of UPMR using MMA as crosslinking agent. UPMRH showed better solvents resistance and tensile strength than UPMR. Adhesion strengths of UPMR crosslinked with styrene and MMA were 1.61 and 3.02 MPa, and those of UPMRH were 2.32 and 3.89 MPa, respectively.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.1
• /
• pp.94-104
• /
• 2004

The purpose of this study is to analyze various hydraulic characteristics using SMS (Surface Water Modeling System) RMA2 model. It is based on 2-D finite element method. River reaches (13.8km) from Gyeongan gauge station to the inlet of Paldang lake was selected. Finite element was made by RIMGIS Data, and the analysis of river-changes was operated by unsteady flow. The sediment concentration and bed change was simulated using SED2D model. This River's velocity was distributed that 0.05~3.85m/s and bed change was changed about 0.0003~0.0135m.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.160-164
• /
• 2011

경기도 안산시 시화습지내에 위치한 하안 유도 시험장에 직선수로와 곡선수로를 시공하였다. 각각의 수로에 유도틀을 설치한 후 수리학적 특성을 분석하기 위해서 2차원 모형인 SMS를 이용하여 유량조건에 따른 유속 및 침식, 퇴적에 미치는 영향을 분석하고 예측하였다. SMS 모형 중 2차원 수리분석을 위한 RMA2 모형과 유사이송현황을 모의할 수 있는 SED2D 모형을 이용하여 하안유도 시험장에 적용하였으며 하안 유도 시험장은 크게 직선수로와 곡선수로로 구분하였다. 각각의 수로에 설치되는 유도틀은 ㄷ자형, ㄷㅂ자형, 직사각형, 마름모형이 있고, 총 10가지 경우로 하여 시험장 유도틀 형태별 2차원 수치모의를 분석하였다. 유속을 모의하기 위해 RMA2모형을 사용하였으며, 침식 및 퇴적을 모의하기 위해 SED2D모형을 사용하였다. 이러한 모의결과를 통해 실제 하천에서 유도틀 시공시 유량에 대한 하류 구간 대책을 수립하는 기초자료 활용하고자 한다.

• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.313-320
• /
• 1994

Rosin-maleic anhydride adduct(RMA) was synthesized from rosin and maleic anhydride. Highly purified RMA for the application of polymerization monomer was synthesized by means of two methods; the melt reaction followed by further purification and the solution reaction. As a result of this study, the solution reaction was better than the melt reaction for obtaining higher yield of RMA. Maximum yield of RMA obtained by the melt reaction was only 40%. But the yield of RMA obtained by the reaction in carbon tetrachloride solution was 48%(theoretical yield 87.6%) and that obtained by the reaction in acetic acid solution was 51.5%(theoretical yield 94%) respectively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.785-790
• /
• 2009

섬진강 하구역에서 모래채취로 인한 지형변화와, 댐 및 취수장의 증가로 인한 유량감소로 인해 해수의 역류범위가 증가하여 참게나 재첩과 같은 경제성 어종이 감소하고, 염분으로 인한 농업용수사용 불가와 같은 염수피해가 늘어가고 있다. 따라서 본 연구에서는 2차원 수치모형인 RMA-2, 4와 3차원 수치모형인 EFDC를 각각 이용하여 밀물 시 염수가 전파되는 범위 및 염수농도를 모의하고, 동시에 2차원 모형과 3차원 모형을 비교하여 모의목적에 대한 각 모형의 장 단점을 알아보았다. 모의결과를 살펴보면 최저 수위 시 두 모형이 큰 차이를 보이는 것을 볼 수 있었으며, EFDC가 상류쪽으로 더 길게 염수침입이 일어나는 것을 볼 수 있었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1418-1423
• /
• 2008

연안이나 하천 등에서 공사 시 준설작업으로 인해 많은 양의 부유토사가 발생되며 발생된 부유 토사의 이송 확산은 수환경에 변화를 초래한다. 따라서 준설작업에 있어 부유토사물의 이송 확산 범위를 사전에 예측하고 대비책을 세우는 것이 중요하다. 부유토사는 준설작업 시 Cutter Head가 해저면에 닿는 순간부터 작동을 멈출 때까지 계속하여 발생하며, 이러한 과정들이 반복되면서 많은 양의 토사가 발생한다. 이렇게 발생한 부유토사는 수체흐름에 따라 움직이는데 조류가 있는 연안에서는 시간에 따라 흐름이 달라지게 된다. 본 연구에서는 2차원 수치모형인 RMA2, RMA4를 이용하여 부유토사의 확산과정을 모의하고 준설현장에서 부유토사흐름을 실측하여 비교하였다.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.2
• /
• pp.35-45
• /
• 2019

The enlargement and reduction of river channels can not only change the flow of water but also alter sedimentation patterns, thus hindering smooth flood conveyance. Accordingly, this study aims to analyze the effects of the sudden enlargement of river channels on changes in the riverbed and river flow. For this purpose, as part of the "Hometown River" Construction Project, this study examined the local river Kyungpo-cheon, which a section of the river channel was widened by at least two- to three-fold, using RMA-2 and SED-2D models to simulate the changes in flow characteristics and riverbed variation due to the widening of the channel. The results of the study indicated that widening the Kyungpo -cheon river channel secured its dimensional stability in comparison to before widening. however, due to a flood frequency of more than once per year, future maintenance and management will be costly and time-consuming.

• Journal of Wetlands Research
• /
• v.19 no.4
• /
• pp.542-550
• /
• 2017

The estimations of flow characteristics and river-bed erosion or sedimentation are very important for hydraulic structure design, floodplain management, and especially, river management. The objective of the study is therefore to estimate the change of flow characteristics and river-bed change due to a hydraulic structure construction. With 11.65 km study area of the Geum River which are located in downstream of Daecheong Dam, flow characteristics and river-bed change were estimated based on the RMA2 and SED2D model. As the result of the study, the increase of river-bed sedimentation in upstream and river-bed erosion in downstream were occurred by the construction of hydraulic structure.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.2
• /
• pp.119-127
• /
• 2008

The flow characteristics and the aspects of riverbed changes were analyzed for the upstream and downstream sections of Gongju Bridge. The upstream and downstream had complex topography, and the sections had the confluence of tributaries and several structures. In order to simulate the flow characteristics of the target sections, 1D HEC-RAS and 2D RMA2 were applied. As a result, the longitudinal water level of the target sections matched the results of simulated 1D and 2D samples. Also, 2D SED2D were applied to predict riverbed changes. As a result of the simulation, quantitative analysis was able to be performed for longitudinal riverbed changes from the sections of sudden change, bridges, the confluence of tributaries, and bends. Also, the distribution of riverbed changes on the main sections was in close relation to flow velocity. As a result of evaluating the sensitivity of SED2D, the concentration of suspended sediment, the thickness of sand beds, and the size of sand grains affected riverbed changes sensitively. These results will be used to apply the models of riverbed changes in the future.