• 제목/요약/키워드: RIO-DC

검색결과 7건 처리시간 0.028초

DiffServ 방식에서 Assured Service의 QoS 보장을 위한 RIO 및 RIO-DC 방식의 성능 비교 (Performance comparisons of RIO and RIO-DC for QoS guarantee of the Assured Service in Differentiated Services)

  • 허경;신동범;이상우;엄두섭;차균현
    • 한국통신학회논문지
    • /
    • 제27권4C호
    • /
    • pp.342-352
    • /
    • 2002
  • 본 논문은 IETF에서 DiffServ의 Assured Service를 위하여 제안된 AF PHB의 버퍼 관리 방식들 중 RIO 및 RIO-DC 방식의 성능을 비교 평가하였다. 이를 위하여 Assured Service의 서브 클래스별로 할당하는 대역폭의 비율을 차별화하여 서브 클래스별로 보장하는 최대 지연시간을 상대적으로 차등화 하였다. 또한, 네트워크 토폴로지와 Assured Service의 서브 클래스별로 할당되는 대역폭의 비율에 따라 결정되는 버퍼 크기를 기준으로 RIO 및 RIO-DC 방식의 변수 값을 설정하였다. 이러한 환경에서, In-profile 트래픽에 대한 수율, 링크 이용률 및 플로간 공평성을 성능의 척도로 하여 제안된 두 방식의 성능을 비교하였다. 시뮬레이션 결과는 제안하는 변수 설정 방안을 적용한 RIO 및 RIO-DC 방식의 Assured Service에 대한 In-profile 트래픽의 수율과 링크 이용률 성능은 동등하나, RIO-DC 방식은 RIO 방식 보다 향상된 플로간 공평성을 보장할 수 있음을 보인다.

RIO-DC Buffer Design for Core Routers in DiffServ Assured Services

  • Hur, Kyeong
    • Journal of information and communication convergence engineering
    • /
    • 제9권5호
    • /
    • pp.539-544
    • /
    • 2011
  • In this paper, a parameter optimization method of RIO-DC (RED (Random Early Detection) with In and Out-De-Coupled Queues) scheme for Assured Service (AS) in Differentiated Services (DiffServ) is proposed. In order to optimize QoS (Quality of Service) performance of the RIO-DC policy for AS in terms of maximum tolerable latency, link utilization, fairness, etc., we should design router nodes with proper RIO-DC operating parameter values. Therefore, we propose a RIO-DC configuration method and the admission control criterion, considering the allocated bandwidth to each subclass and the corresponding buffer size, to increase throughput for In-profile traffic and link utilization. Simulation results show that RIO-DC with the proposed parameter values guarantees QoS performance comparable with the RIO scheme and it improves fairness between AS flows remarkably.

LabVIEW의 모델기반 제어기 설계와 Compact RIO를 이용한 직류전동기 구동 시스템 (DC Motor Drive System Using Model Based Cotroller Design of LabVIEW and Compact RIO)

  • 지준근
    • 한국산학기술학회논문지
    • /
    • 제9권2호
    • /
    • pp.352-359
    • /
    • 2008
  • 본 논문에서는 모델기반의 제어기 설계 프로그램인 National Instruments(NI)사의 System Identification Toolkit과 Control Design Toolkit, Simulation module을 사용하여 기존의 제어기 설계방식보다 쉽고 편리하게 제어기를 설계할 수 있었다. 직류전동기의 속도제어시스템을 구현하기 위해서 하드웨어는 NI사에서 제공하는 실시간 제어기(Real-Time Controller:RT) CompactRIO를 사용하였다. 먼저는, 테스트 입력 신호를 전동기에 인가하고 얻은 출력신호를 통해 제어대상 플랜트인 직류전동기 구동시스템의 전달함수를 구할 수 있었다. 다음으로는 원하는 제어응답성능을 갖는 극점, 영점 제어기를 설계한 후, 모의실험을 통해 속도제어응답을 확인할 수 있었고, 실시간 프로그램으로 다운로드하여 실제 전동기 구동시스템의 실험을 통해서 설계된 속도제어기의 응답 결과를 모의실험과 비교하여 검증하였다.

DiffServ 방식에서 플로별 관리 없이 Assured Service의 End-to-End QoS를 향상하기위한 Aggregate Three Color Marker (An Aggregate Three Color Marker without Per Flow Management for End-to-End QoS Improvement of Assured Service in DiffServ)

  • 허경;박지훈;노영섭;엄두섭;차균현
    • 한국통신학회논문지
    • /
    • 제28권6B호
    • /
    • pp.588-603
    • /
    • 2003
  • 본 논문은 Diffserv 방식에서 플로별 관리없이 Assured Service의 End-to-End 005를 향상시키기 위해 DiffServ 도메인의 입구라우터에서 플로별 관리를 수행하지 않는 Aggregate Three Color Marker를 제안하였다. 제안하는 Aggregate Three Color Marker는 Diffserv 방식에서 개별 플로에 대한 관리 없이 Assured Service의 QoS를 보장하기 위해 Adaptive RIO-DC 버퍼 관리 방식과 함께 사용된다. 제안하는 Aggregate Three Color Marker는 Assured Service에 대한 접속제어가 수행된 상황에서 입구라우터를 경유하는 개별 플로들이 전송하는 In-profile 트래픽 전송률들의 총합 만큼의 Token rate로서 입구 라우터로 유입되는 전체 In-profile 트래픽의 양을 측정하고, 허용된 In-profile 트래픽의 Aggregate Trafile profile 범위에 속하는 손실된 Token 양만큼 경유하는 Out-of-profile 패킷들을 Yellow 패킷들로 표기한다. 그리고 DiffServ 내부라우터에서는 In-profile 패킷과 Yellow 패킷을 동일하게 처리하며, 플로간의 공평성을 유지하기 위해 이전 도메인에서 입구라우터로 유입되는 Yellow 패킷은 Out-of-profile 패킷으로 환원된다. 시뮬레이션 결과는 제안하는 Aggregate Three Color Maker를 Adaptive RIO-DC와 함께 적용하여 다중 DiffServ 도메인 환경에서 플로별 관리없이 Assured Service에 대한 End-to-End QoS를 보장할 수 있음을 보인다.

LabVIEW의 모델기반 제어기 설계와 Compact RIO를 이용한 직류전동기 구동 시스템 (DC Motor Drive System Using Model Based Cotroller Design of LabVIEW and Compact RIO)

  • 송의섭;이희준;이용석;지준근
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 제38회 하계학술대회
    • /
    • pp.1956-1957
    • /
    • 2007
  • 본 논문에서는 모델기반의 제어기 설계 프로그램인 National Instruments(NI)사의 System Identification Toolkit과 Control Design Toolkit, Simulation module을 사용하여 기존의 제어기 설계방식 보다 쉽고 편리하게 제어기를 설계할 수 있었다. 직류전동기의 속도 제어시스템을 구현하기 위해서 하드웨어는 NI사에서 제공하는 실시간 제어기(Real-Time Controller:RT) CompactRIO를 사용하였다. 먼저는, 테스트 입력 신호를 전동기에 인가하고 얻은 출력신호를 통해 제어대상 플랜트인 직류전동기 구동시스템의 전달함수를 구할 수 있었다. 다음으로는 원하는 제어응답성능을 갖는 극점, 영점 제어기를 설계한 후, 모의실험을 통해 속도제어응답을 확인할 수 있었고, 실시간프로그램으로 다운로드하여 실제 전동기 구동시스템의 실험을 통해서 설계된 속도제어기의 응답 결과를 모의실험과 비교하여 검증하였다.

  • PDF

소형 풍력발전 시스템을 위한 CRIO 기반의 실시간 제어 시스템 설계 및 다양한 형태의 MPPT 알고리즘 성능 비교 분석 (Design of CRIO-based real-time controller for small-sized wind turbine generating system and comparative study on performance of various MPPT algorithms)

  • 김수진;김병문;김성호
    • 한국지능시스템학회논문지
    • /
    • 제21권1호
    • /
    • pp.55-61
    • /
    • 2011
  • 10KW 이하의 소형 풍력 발전 시스템은 언덕이나, 공원, 도시와 같은 협소한 지역에 유연하게 설치될 수 있다는 장점으로 인해 신재생에너지 분야에서 지속적인 연구/개발이 이루어지고 있다. 소형 풍력 발전기는 낮은가격, 고신뢰도 및 고성능이 중요시되기 때문에 최대 전력을 추종하기 위한 다양한 기법이 요구된다. 일반적으로 제어기의 출력은 DC 부하에 전원을 공급하기 때문에 48V 배터리에 연결되어 동작된다. 본 논문에서는 소형 풍력 발전 시스템을 위한 FPGA 기반 MPPT 제어기를 제안하고자하며, 제안된 시스템에서의 다양한 MPPT 알고리즘의 성능을 검증하기 위해 NI 사에서 제작된 Compact-RIO 컨트롤러를 사용하였다.

Evaluation of a FPGA controlled distributed PV system under partial shading condition

  • Chao, Ru-Min;Ko, Shih-Hung;Chen, Po-Lung
    • Advances in Energy Research
    • /
    • 제1권2호
    • /
    • pp.97-106
    • /
    • 2013
  • This study designs and tests a photovoltaic system with distributed maximum power point tracking (DMPPT) methodology using a field programmable gate array (FPGA) controller. Each solar panel in the distributed PV system is equipped with a newly designed DC/DC converter and the panel's voltage output is regulated by a FPGA controller using PI control. Power from each solar panel on the system is optimized by another controller where the quadratic maximization MPPT algorithm is used to ensure the panel's output power is always maximized. Experiments are carried out at atmospheric insolation with partial shading conditions using 4 amorphous silicon thin film solar panels of 2 different grades fabricated by Chi-Mei Energy. It is found that distributed MPPT requires only 100ms to find the maximum power point of the system. Compared with the traditional centralized PV (CPV) system, the distributed PV (DPV) system harvests more than 4% of solar energy in atmospheric weather condition, and 22% in average under 19% partial shading of one solar panel in the system. Test results for a 1.84 kW rated system composed by 8 poly-Si PV panels using another DC/DC converter design also confirm that the proposed system can be easily implemented into a larger PV power system. Additionally, the use of NI sbRIO-9642 FPGA-based controller is capable of controlling over 16 sets of PV modules, and a number of controllers can cooperate via the network if needed.