• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.373-375
• /
• 2011

최근 태양전지 연구에서 저가격화를 실현하는 방법 중 하나로 폐 실리콘 웨이퍼를 재생하는 방법에 관하여 많은 연구가 진행되고 있다. 그러나 기존 웨이퍼 재생공정은 높은 재처리 비용과 복잡한 공정등의 많은 단점을 가지고 있다. 결정형 태양전지에서 저가격화 및 고효율은 태양전지를 제작하는데 있어 필수 요소 이다. 그 중 결정질 태양전지 고효율을 위한 여러 연구 방법 중 표면 텍스쳐링(texturing)에 관한 연구가 활발하다. 텍스쳐링은 표면반사에 의한 광 손실을 최소화 하여 효율을 증가시키기 위한 방법으로 습식 식각과 건식 식각을 사용하여 태양전지 표면 위에 요철 및 피라미드구조를 형성하여 반사율을 최소화 시킨다. 건식식각은 습식식각과 다른 환경적 오염이 적은 것과 소량의 가스만으로 표면 텍스쳐링이 가능하여 많은 연구가 진행중이다. 건식 식각 중 하나인 RIE(reactive ion etching)는 고주파를 이용하여 플라즈마의 이온과 silicon을 반응 시킨다. 실험은 RIE를 이용하여 SF6/02가스를 혼합하여 비등방성 에칭 및 피라미드 구조를 구현하였다. RIE 공정 중 SF6/02가스는 높은 식각 율을 갖으며 self-masking mechanism을 통해 표면이 검게 변화되고 반사율이 감소하게 된다. 이 과정을 통해 블랙 실리콘을 형성하게 된다. 블랙 실리콘은 반사율 10% 이하로 self-masking mechanism으로 바늘모양의 구조를 형성되는 게 특징이며 표면이 검은색으로 반사율이 낮아 효율증가로 예상되지만 실제 바늘 모양의 블랙 실리콘은 태양전지 제작에 있어 후속 공정 인 전극 형성 시 Ag Paste의 사이즈와 표면 구조를 감안할 때 태양 전지 제작 시 Series resistance를 증가로 효율 저하를 가져온다. 본 연구는 SF6/02가스를 혼합하여 기존 RIE로 형성된 바늘모양의 구조의 블랙 실리콘이 아닌 RIE 내부에 metal-mesh를 장착하여 단결정(100)실리콘 웨이퍼 표면을 텍스쳐링 하였고 SF6/02 가스 1:1 비율로 공정을 진행 하였다. metal-mesh 홀의 크기는 100um로 RIE 내부에 장착하여 공정 시간 및 Pressure를 변경하여 실험을 진행하였다. 공정 시간이 변경됨에 따라 단결정(100) 실리콘 웨이퍼 표면에 피라미드 구조의 균일한 1um 크기의 블랙 실리콘을 구현하였다. 바늘모양의 블랙 실리콘을 피라미드 구조로 구현함으로써 바늘 모양의 단점을 보완하여 태양전지 전기적 특성을 분석하여 태양전지 제작시 변환 효율을 증가시킬 것으로 예상된다.

• Journal of the Korean Vacuum Society
• /
• v.19 no.4
• /
• pp.314-318
• /
• 2010

We fabricated a plasma texturing for multi-crystalline silicon cells using reactive ion etching (RIE). Multi-crystalline Si cells have not benefited from the cost-effective wet-chemical texturing processes that reduce front surface reflectance on single-crystal wafers. Elimination of plasma damage has been achieved while keeping front reflectance to extremely low levels. We will discuss reflectance, quantum efficiency and conversion efficiency for multi-crystalline Si solar cell by each RIE process conditions.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.05a
• /
• pp.112-112
• /
• 2001

• Journal of Sensor Science and Technology
• /
• v.8 no.5
• /
• pp.368-376
• /
• 1999

This paper predicts the changes in the spring constant, the resonant frequency, the electrostatic force, and the displacement of a resonant structure due to non-ideal anisotropic RIE etching process. First, a $6\;{\mu}m$ thick polysilicon was etched by RIE and the anisotropy of the etched structure was measured as a function of a RF power, a $Cl_2$ flow rate and a chamber pressure. In the experimental results, an anisotropy was decreased as the RF power, the $Cl_2$ flow rate, or the chamber pressure was increased. A comb actuator's operation characteristic was predicted depending on the anisotropy variations in RIE etching. Comb actuators with three different support beam structures were investigated : fixed-fixed, crab-leg, and double crab-leg. As the RIE etch anisotropy becomes non-ideal, i.e. the cross section becomes rather a trapezoidal than a rectangular shape, it decreases spring constant, resonant frequency and electrostatic force of a comb actuator but it increases the displacement of the mass. Among the three structures, the comb actuator with double crab-leg support beams is more influenced by anisotropy variation in RIE etch than other two.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.892-895
• /
• 2003

This paper describes on RIE(Reactive Ion Etching) characteristics of 3C-SiC(Silicon Carbide) grown on Si(100) wafers. During RIE of 3C-SiC films in this work, $CHF_3$ gas is used to form of polymer as a side wall for excellent anisotropy etching. From this process, etch rates are obtained a $60{\sim}980{\AA}/min$ by various conditions such as $CHF_3$ gas flux, $O_2$ addition ratio, RF power and electrode distance. Also, approximately $40^{\circ}$ mesa structures are successfully formed at 100 mTorr $CHF_3$ gas flow ratio, 200 W RF power and 30 mm electrode distance. Moreover, vertical side wall is fabricated by anisotropy etching with 50% $O_2$ addition ratio and 25 mm electrode distance. Therefore, RIE of 3C-SiC films using $CHF_3$ could be applicable as fabrication process technology for high-temperature 3C-SiC MEMS applications.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.243-243
• /
• 2010

This paper two different etching, HF : HNO3 :DI and RIE were used for etching in multi-crystalline Silicon(Mc-Si) solar cell fabrication. The wafers etched in RIE texture showed low reflectance compared to the wafers etched in Acid soultion after SiNx deposition. In light current-voltage results, the cells etched in RIE texture exhibited higher short circuit current and open circuit voltage than those of the cells etched in acid solution. We have obtained 15.1% conversion efficiency in large area($156cm^2$) Multi-Si solar cells etched in RIE texture.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.4
• /
• pp.1-5
• /
• 2009

This investigation is applied Taguchi method and the analysis of variance(ANOVA) to the reactive ion etching(RIE) characteristics of $SiO_2$ film coated on a wafer with Experimental Analysis and Optimization of $CF_4/O_2$ Plasma Etching Process mixture. Plans of experiments via nine experimental runs are based on the orthogonal arrays. A $L_9$ orthogonal array was selected with factors and three levels. The three factors included etching time, RF power, gas mixture ratio. The etching rate of the film were measured as a function of those factors. In this study, the etching thickness mean and uniformity of thickness of the RIE are adopted as the quality targets of the RIE etching process. The partial factorial design of the Taguchi method provides an economical and systematic method for determining the applicable process parameters. The RIE are found to be the most significant factors in both the thickness mean and the uniformity of thickness for a RIE etching process.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.4
• /
• pp.169-172
• /
• 2015

Although, there are several research studies on the engineering of the graphene layers using different etching techniques, there is not any comprehensive study on the effects of using different etching masks in the reactive ion etching (RIE) method on the quality and uniformity of the etched graphene films. This study investigated the effects of using polystyrene and conventional photolithography resist as a etching mask on the engineering of the number of graphene layers, using RIE. The effects were studied using Raman spectroscopy. This analysis indicated that the photo-resist mask is better than the polystyrene mask because of its lower post processing effects on the graphene surface during the RIE process. A single layer graphene was achieved from a bi-layer graphene after 3 s of the RIE process using oxygen plasma, and the bi-layer graphene was successfully etched after 6 s of the RIE process. The bilayer etching time was significantly smaller than reported values for graphene flakes in previous research.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.7
• /
• pp.724-728
• /
• 2004

This paper describes on RIE(Reactive Ion Etching) characteristics of 3C-SiC(Silicon Carbide) grown on Si(100) wafers. In this work, CHF$_3$ gas was used to form the polymer as a function of a side-wall for excellent anisotropy etching during the RIE process. The ranges of the etch rate were obtained from 60 $\AA$/min to 980 $\AA$/min according to the conditions such as working gas pressure, RF power, distance between electrodes and the $O_2$ addition ratio in working gas pressure. Under the condition such as 100 mTorr of working gas pressure, 200 W of RF power and 30 mm of the distance between electrodes, mesa structures with about 40 of the etch angle were formed, and the vertical structures could be improved with 50 % of $O_2$ addition ratio in reactive gas during the RIE process. As a result of the investigation, we know that it is possible to apply the RIE process of 3C-SiC using CHF$_3$ for the development of electronic parts and MEMS applications in harsh environments.

• Journal of Sensor Science and Technology
• /
• v.16 no.2
• /
• pp.126-131
• /
• 2007

In this paper, we fabricated piezoresistive pressure sensor with dry etching technology which used ICP-RIE (inductively coupled plasma reactive ion etching) and etching delay technology which used SOI (silicon-on-insulator). Structure of the fabricated pressure sensor shows a square diaphragm connected to a frame which was vertically fabricated by dry etching process and a single-element four-terminal gauge arranged at diaphragm edge. Sensitivity of the fabricated sensor was about 3.5 mV/V kPa at 1 kPa full-scale. Measurable resolution of the sensor was not exceeding 20 Pa. The nonlinearity of the fabricated pressure sensor was less than 0.5 %F.S.O. at 1 kPa full-scale.