• Journal of Veterinary Science
• /
• v.24 no.2
• /
• pp.28.1-28.7
• /
• 2023

A three-year-old female spayed Lurcher was referred for the treatment of a highly comminuted distal tibial articular fracture. Resection of the area of comminution with a transverse osteotomy of the tibial diaphysis and talar ridges was performed, followed by modified pantarsal arthrodesis and a calcaneotibial screw. The treatment resulted in 7 cm of tibial shortening, equating to a 28% reduction in the total tibial length. Radiographic union of the arthrodesis was successful. Fair use of the pelvic limb was documented long-term. Combined acute limb shortening and modified pantarsal arthrodesis resulted in an acceptable outcome and could be considered in cases of highly comminuted distal tibial fractures.

• Implantology
• /
• v.19 no.3
• /
• pp.146-152
• /
• 2015

Mini-dental implants for overdenture applications are increasingly popular due to their ease in placement with simplified, less traumatic surgical protocols in limited-width alveolar ridges. However, the clinical decisions including implant number, position, and loading protocol must be based on a thorough evaluation and evidence-based diagnosis. Herein, we reported a case treated with the current method of mandibular mini-implant supported overdenture.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.29 no.1
• /
• pp.14-27
• /
• 2024

Unlike the shelf sand ridges moribund in motion, nearshore sand ridges are highly mobile, sensitive to changes in ocean environments, thereby becoming of particular interest with respect to morphological changes. About 5 km off the Daesan port, the Jangan Sand Ridge has been undergoing severe subsea morphological change over the past two decades. Understanding the nature of sand ridges is critical to elucidate the causes of morphological changes. In this context, this study aims at understanding the characteristics and distribution patterns of surface sediments of the ridge and its vicinity. For this purpose, 227 sediment samples were acquired using a grab-sampler, the grain sizes being analysed by the sieve-pipette method. In addition, comparison of grain sizes in sediments between 1997 and 2021 was made in order to investigate the 25-years change in sediment composition. Surface sediments along the ridge axis are fine to medium sands with 2-3 phi in mean grain size, whereas, in the trough of ridge, the sediments are composed of gravels and muddy sandy gravels with mean sizes of -2 to -6 phi. Sediments in the crest of the ridge are well-sorted with normal distribution, on the other hand, the basal sediments are poorly-sorted and positively skewed. Along the ridge crest, the sediments are negatively skewed. From 1997 to 2021, the ridge sediments became largely coarser about 0.5 phi. Such coarsening trend in mean grain size can be explained either by elimination of fine sediments during high waves in winter or elimination of fines suspended during sand mining activities in the past. Spatial distribution pattern of surface sediments shows that ca. 30 m thick of the sand ridge itself overlies the thin relict gravels. The strong asymmetry of sand ridge, the exposure of ridge base, and reworked gravel lags suggest that Jangan sand ridge is probably sediment-deficit and hence erosive in nature at present.

• Horticultural Science & Technology
• /
• v.18 no.5
• /
• pp.599-604
• /
• 2000

This experimemt was conducted to determine the effect of ridge-up bed with different height (0, 20, 40, 60 cm) on the fruit quality of 'Miyagawa Wase' satsuma mandarin cultivated in a plastic film house. Soil moisture was measured at the soil depths of 10, 30, and 60 cm for each height of ridge-up bed. The time required to reach the condition, -1.4 Mpa at 30 cm deep in soils, which are supposed to be the ideal soil moisture potential and soil depth for high quality satsuma mandarin production, was 100, 60, and 30 days for 20, 40, and 60 cm ridge-up bed, respectively, and more than 100 days for 0 cm. Peel chromaticity by 'a' value was increased as the ridge-up height went up, so that plants grown at the bed with 60 cm height had 11 degree higher value than those of plants grown at the bed with 0 cm height. The 'a/b' values also had a similiar trend as value 'a'. The reducing sugar level of the fruit juice, which was composed of glucose and fructose, was increased as the height of ridge went up, showing significant difference between the ridge heights. The sucrose level had the same trend as the reducing sugar level although the difference between the ridge heights were not significant. Generally, the soluble solid level is considered to be representing the fruit quality. It had 11.4, 12.1, 12.5, $12.8^{\circ}Brix$ for 0, 20, 40, and 60 cm ridge-ups, respectively, showing $1.4^{\circ}Brix$ difference between 0 and 60 cm ridges. Acidity basically showed the same result as that of the soluble solid level depending on the height of the ridges.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.731-740
• /
• 1998

In the previous studies about prescription of preadjusted appliance, occlusal plane was used as a reference plane for crwon angulation (tip) measurement. But this reference plane is not parallel to the line connecting the facial axis points at which the centers of brackets are positioned (Andrews' plane), due to the curve of Spee. Therefore, we developed a new reference plane unaffected by the curve of Sun and more parallel to the Andrews' plane. It is an imaginary line connecting mesial and distal marginal ridges of each posterior tooth, and we named it 'marginal ridge plane'. In this study, crown angulations of posterior teeth of 29 normal occlusion samples were measured and measurements from both reference planes were compared. Crown angulation measurements measured from occlusal plane were different from crown angulation measurements from marginal ridge plane in the upper and lower 2nd molars (p<0.01), md 1st premolars (p<0.05). These results were analyzed as the crown angulation measurements from occlusal plane were affected by the curve of Spee. Crown angulations should be varied according to the amount of curve of Spee to maintain the continuity of marginal ridges. To solve this problem, determining bracket angulation as the bracket slot is parallel to the marginal ridge plane of each posterior teeth is recommended.

• The korean journal of orthodontics
• /
• v.34 no.4 s.105
• /
• pp.289-301
• /
• 2004

It is the purpose of this study to characterize oral symptoms and to comprehend the cause and the relapse possibility of patients with open bite. This case study examines the orthodontic treatment of a group of female patients with open bite and Angle's Class I malocclusion. A cephalograph of the patient was taken and tracing of the radiograph was completed. In addition to Bjork and Ricketts analysis, additional measurements of specific areas were taken. The occlusal plane was determined by drawing a line connecting the mesiobuccal cusp tip of the maxillary first molar and the incisal edge of the maxillary central incisors. Patients were divided into two groups depending on the relationship between the marginal ridge of the maxillayy first premolar and the drawn line. Those patients with marginal ridges above the occlusal plane were placed into Group 1, while Group 2 subjects exhibited marginal ridges lower than the occlusal plane. The common characteristics within each group and the characteristic differences between each group both prior to and after orthodontic treatment were examined, and finally, the functional oral volume of each patient was analyzed. The results of the case study were as follows: 1. An examination of the skeletal relationship and anatomical form for both Group 1 and 2 showed that all subjects exhibited hyperdivergent skeletal forms, but Group 2 subjects generally demonstrated underdevelopment of the mandible and a smaller articular angle, resulting in an anterior positioning tendency of the mandible. 2. An analysis of the maxillary arches of Group 1 subjects prior to and after orthodontic treatment showed that the antero-inferior direction had changed to an antero-superior directional tendency, while the maxillary arches of the Group 2 patients showed a trend from an antero-superior direction to an antero-inferior relationship. The mandibular arches in both groups showed a change to an antero-superior direction. 3. Functional space analysis showed that Group 2 patients exhibited a greater tendency of haying palatal planes that drop in a postero-inferior direction, resulting in a more severe open bite than their Group 1 counterparts. The results of this case study show that although patients belonging to either Group 1 or 2 exhibited few external differences in the appearance of open bite, an examination of the dental and skeletal relationships by analyzing patient cephalographs showed that patients presenting with flat maxillary occlusal planes exhibited more severe open bite relationships than patients with curved occlusal planes.

• Journal of Korea Multimedia Society
• /
• v.13 no.9
• /
• pp.1337-1347
• /
• 2010

Fingerprint recognition is a biometric technology to identify individual by using fingerprint features such ridges and valleys. Most fingerprint systems perform the recognition based on minutiae points after acquiring a fingerprint image from contact type sensor. They have an advantage of acquiring a clear image of uniform size by touching finger on the sensor. However, they have the problems of the image quality can be reduced in case of severely dry or wet finger due to the variations of touching pressure and latent fingerprint on the sensor. To solve these problems, the contactless capturing devices for a fingerprint image was introduced in previous works. However, the accuracy of detecting minutiae points and recognition performance are reduced due to the degradation of image quality by the illumination variation. So, this paper proposes a new LDP-based fingerprint recognition method. It can effectively extract fingerprint patterns of iterative ridges and valleys. After producing histograms of the binary codes which are extracted by the LDP method, chi square distance between the enrolled and input feature histograms is calculated. The calculated chi square distance is used as the score of fingerprint recognition. As the experimental results, the EER of the proposed approach is reduced by 0.521% in comparison with that of the previous LBP-based fingerprint recognition approach.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.4
• /
• pp.314-318
• /
• 2009

The aim of this study was to evaluate the clinical applicability of a ridge splitting technique for reconstruction of narrowed edentulous alveolar ridges for dental implantation. 41 patients with 47 edentulous areas were included in this study. After corticotomy of a rectangular buccal segment and about 3-4 weeks healing period, the alveolar ridge was splitted, implant was placed. The initial ridge width varied between 2.5 and 7.0mm, average was 3.99mm. 68 dental implants were placed, and the gap between the implants and the bone is filled with various bone graft material, or none. All splitted sites showed sufficient bone volume for insertion of the implants at the moment of implantation. Over 1 year of follow-up period, five implants(7.3%) had mobility in two patients, among them, 2 implants(2.9%) sustained infection and removed. And any other complications were not noted. Our conclussion is that ridge splitting of the narrow edentulous area is a reliable and safe procedure in horizontally deficient ridges.

• Korean Journal of Environment and Ecology
• /
• v.33 no.6
• /
• pp.708-721
• /
• 2019

This study was conducted to understand the plant community structure characteristics of warm-temperate forest in Geoje Island. Survey sites were set up on ridges, valleys, and slopes where evergreen broad-leaved trees predominated or distributed in canopy, sub-canopy, or shrub layers at Chunjangsan(Mt.). Thirty-one sites were located in the areas, such as vegetation community, ridges, valleys, and slopes, to observe vegetation structure and location changes. The community classification with TWINSPAN identified six groups: Neolitsea sericea-Platycarya strobilacea, N. sericea-Styrax japonicus, N. sericea-Euonymus oxyphyllus, Pinus thunbergii-N. sericea, N. sericea-Quercus serrata, and Q. variabilis-P. strobilacea. Considering the results of previous studies that reported that the successional pattern of the warm temperate forests progressed from deciduous to evergreen forests, the regions predominated by deciduous communities such as P. thunbergii, Q. serrata, P. strobilacea, Zelkova serrata, and Q. variabilis, is likely to transform into the evergreen forest predominated by N. sericea. The relationship between the impact of the environmental factors and the vegetation distribution showed that slope, Na +, K +, electrical conductivity, and clay among physical properties had direct or indirect effects on vegetation distribution.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.4
• /
• pp.546-554
• /
• 2007

Statement of problem: Die materials require abrasion resistance, dimensional stability with time, and high surface wettability for adequate material properties. Wear of gypsum materials is a significant problem in the fabrication of accurately fitting cast prosthetic devices. So It has been recommended that the use of die hardener before carving or burnishing of the wax pattern. Purpose: The purpose of this study was to compare the abrasion resistance and surface microhardness(Knoop) with 3 commonly used gypsum die materials(MG Crystal Rock, Super plumstone, GC $FUJIROCK^{(R)}$ EP) with and without the application of 2 die hardeners. Material and methods: Three die materials were evaluated for abrasion resistance and surface microhardness after application of 2 die hardeners(Die hardener and Stone die & plaster hardener). Thirty specimens of each gypsum material were fabricated using an impression of resin die(Pattern resin; GC Corporation, Japan) with 1-mm high ridges, sloped 90 degrees. Gypsum materials were mixed according to manufacturer's recommendations and allowed to set 24 hours before coating. Specimens were arbitrary assigned to 1 of 3 treatment subgroups (n=10/subgroup): no treatment(control), coated with Die hardener, and coated with Stone die & plaster hardener. Abrasion resistance(measured by weight loss) was evaluated using device in 50g mass perpendicular to the ridges. Knoop hardness was determined by loading each specimen face 5 times for 15 seconds with a force of 50g. A scanning electron microscope was used to evaluate the surface of specimens in each treatment subgroup. Conclusions: The obtained results were as follows: 1. 3 types of die stone evaluated in this study did not show significant differences in surface hardness and abrasive resistance(P<.05). 2. In the abrasive resistance test, there were no significant differences between GC $FUJIROCK^{(R)}$ EP and MG Crystal Rock with or without 2 die hardener(P<.05). 3. Super plumstone treated with Stone die & plaster hardener showed increased wear loss(P<.05) 4. Die hardener coatings used in this study decreased the surface hardness of the gypsum material(P<.05).