• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.171-174
• /
• 2000

This study uses neon and xenon gas mixture discharges to determine the effects of the neon plasma emission on the characteristics of visible emission from the stimulation of the red, green, blue(RGB) phosphor layers in a surface-type alternate current plasma display panel(AC PDP). With a mixture of less than 2% xenon to neon, it is found that the luminance changes in the visible emission of the phosphor layers are similar to those of the neon plasma emission. In the range of xenon mix ratio from 2 to 5%, the luminance of the red, green, blue(RGB) phosphor layers decreases with a decrease in the neon plasma emission intensity. However, with a mixture of above 5% xenon to neon, the luminance of the red, green, blue(RGB) phosphor layers increases regardless of a decrease in the neon plasma emission intensity. Furthermore, the color purity of the red, green, blue(RGB) phosphor layers improve as the neon plasma emission intensity decreases. Accordingly, it is concluded that the optical properties of the phosphor layers, including color purity and luminance, depend on the neon plasma discharge emission as well as the visible emission from the stimulation of the phosphor layers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.281-281
• /
• 2009

Electrical analysis of red, green and blue (RGB) organic light emitting diode (OLED), which were measured at various temperatures from 230K to 370K by steps of 20K, were investigated using current-voltage(I-V) characteristics. Ideality factor and series resistance were obtained from the thermionic emission theory. Experimental results showed that the ideality factors were 2.12 for red, 3.80 for green, and 6.03 for blue OLED at 290K, respectively. The series resistance were 1960, 2190, 2630$\Omega$ for red, green and blue OLED at the same temperature. It was found that the OLED ideality factors were much higher than near unity for well-behaved silicon diodes, because of the organic material and multi-layer fabrication diode. In addition, the series resistance was near 2k$\Omega$ range. More researches are required to reduce both ideality factors and series resistance to increase the efficiency of OLEDs.

• Korean Journal of Bronchoesophagology
• /
• v.18 no.2
• /
• pp.45-48
• /
• 2012

Background Neoplastic vessels tend to proliferate on the surface of malignant lesions in the aerodigestive tract. So, superficial malignant lesions can be detected earlier by enhancing mucosal vascular clarity. To enhance mucosal vascular clarity on endoscopic image, we developed an image processing algorithm of RGB (red-green-blue) channel substitution image (CSI). Methods Each pixel in original white light image (WLI) has its own value of red, green and blue channel. Various combinations of RGB channel substitution was tried on original WLI. Results To make superficial blood vessels darker than brighter background mucosa, in the CSI algorithm, RGB value in each pixel of WLI is substituted; red value to green one, green value to blue one. There was a good contrast between superficial mucosal vessels and background brighter mucosa in the CSI image. Conclusion By RGB CSI algorithm, WLI could be successfully converted to new images with enhanced mucosal vascular clarity. Using RGB CSI algorithm could provide added vascular visibility on original WLI.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.110-111
• /
• 2014

RGB laser 를 이용하여 rf-magnetron sputtering 법으로 합성한 a-IGZO 박막의 photoresponse 를 관찰하였다. Air 분위기에서 red 파장을 조사 할 경우 비교적 slow recovery 특성을 보였으며, green 과 blue 파장을 조사 할 경우 red 보다 fast recovery 특성을 나타내었다. 그러나 진공에서 측정할 경우, red 파장에서는 recovery 가 빨라졌으며, green 과 blue 파장의 경우 recovery 가 매우 느려짐을 확인하였다. 이는 passivation 을 하지 않은 소자의 oxygen gas 의 흡/탈착 때문으로 예상할 수 있었으며, red 파장이 gas 탈착에 기여하는 정도가 매우 작고, green 과 blue 파장이 gas 탈착에 기여하는 정도가 매우 크기 때문인 것으로 생각할 수 있었다. 온도를 증가시킬 경우, 모든 경우에서 recovery 가 빠르게 나타났는데 이는 흡/탈착에 필요한 barrier 및 $V_o{^{2+}}$에서 Vo 로 돌아오기 위한 barrier 를 쉽게 넘어갈 수 있기 때문으로 이해 할 수 있었다. 이러한 결과를 stretched exponential equation 을 이용하여 해석하였으며 수치화 하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.414-415
• /
• 2006

At present, Characteristic of high color reproduction for LCD products needed in Display market. Therefore, The improving methods of high color reproduction are alteration of color Filter or Red, Green, Blue phosphor alteration of CCFL. But High color reproduction phosphor is short life time as compared with conventional phosphor. In this experiment, by using split the Red, Green, Blue CCFL with high color reproduction phosphor instead of conventional high color reproduction CCFL. We knew that the high color reproduction RGB split CCFL BLU has same spectrum data and chromaticity, but has long life time as manufacturing RGB split CCFL and reduce chromaticity shift following long time discharge as compared with conventional high color reproduction CCFL.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.993_994
• /
• 2009

본 논문에서는 RGB 멀티칩 LED모듈을 구성하고 포워드 컨버터 방식의 Red LED의 구동전압인 13V 및 Green과 Blue LED의 구동전압인 21V의 다중출력 SMPS를 설계하였다. 설계 제작된 SMPS로 RGB 멀티칩 LED 모듈을 구동하였으며 21V 및 13V의 전압 출력이 안정적으로 구동됨을 확인하였으며 Red, Green, Blue 각각의 LED는 안정적으로 구동됨을 확인하였다. 또한 구동용 SMPS는 역률제어를 통하여 안정성을 향상시켰다.

• Journal of the Korean Ceramic Society
• /
• v.47 no.2
• /
• pp.146-150
• /
• 2010

Because the plasma display panel has used red, green and blue(RGB) phosphors, it has suffer from two intrinsic problems; 1) the cell defect due to the lack of binding force between phosphor particles and 2) mis-discharge because of difference of electrical characteristics among RGB phosphors. In order to control the mechanical and electrical properties of RGB phosphors, frit with $ZnOB_2O_3-SiO_2-Al_2O_3$ system was added to RGB phosphor as sintering additive. The mechanical properties were increased by the amount of frit. The amount of frit under 5 wt% rarely affected dielectric constant. However, there was the limit of amount because of decreasing optical properties seriously; over 3 wt% in red, over 10 wt% in green and blue.

• Science of Emotion and Sensibility
• /
• v.14 no.3
• /
• pp.371-384
• /
• 2011

Three experiments were carried out to examine how LED lighting hues influence to the rating and recognition of affective stimuli. In Experiment 1 and 2, IAPS affective pictures were used and an affective rating(valence and arousal) task and a recognition memory task were conducted under red, green, blue, and white hue LED lightings in Experiment 1 and cyan, magenta, yellow, and white ones in Experiment 2, respectively. In Experiment 3, affective words were used and the same two tasks were conducted under red, green, blue, and white hue LED lightings. According to the results of affective rating tasks, when primary hues(RGB) were used, red LED lighting elicited an excitement at the arousal dimension and green LED lighting evoked pleasantness at the valence one. When secondary hues(CMY) were used, magenta and cyan showed the similar but weaker patterns of responses comparing to red and green. The results of recognition memory task showed that the responses to the picture stimuli presented at green and cyan hue lightings tended to be a bit faster comparing to the stimuli presented at the other conditions but the difference was insignificant. In Experiment 3, however, recognition memory responses to the affective words presented at green hue lighting were faster significantly. These results indicate that warm colors like red and magenta elicit unpleasantness or excitement while cool colors like green and cyan evoke pleasantness or relaxation, and the primary hues provoke more positive or negative affectivity than secondary ones do. Particularly, the result of recognition memory task in Experiment 3 suggests that green hue LED lighting might be advantageous at the memory performance of language stimuli rather than visual ones.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.1
• /
• pp.71-91
• /
• 2018

In recent years, application of UAV(Unmanned Aerial Vehicle) to seed sowing and pest control has been actively carried out in the field of agriculture. In this study, UAS(Unmanned Aerial System) is constructed by combining image sensor of various wavelength band and SfM((Structure from Motion) based image analysis technique in UAV. Utilization of UAS based vegetation survey was investigated and the applicability of precision farming was examined. For this purposes, a UAS consisting of a combination of a VIS_RGB(Visible Red, Green, and Blue) image sensor, a modified BG_NIR(Blue Green_Near Infrared Red) image sensor, and a TIR(Thermal Infrared Red) sensor with a wide bandwidth of $7.5{\mu}m$ to $13.5{\mu}m$ was constructed for a low cost UAV. In addition, a total of ten vegetation indices were selected to investigate the chlorophyll, nitrogen and water contents of plants with visible, near infrared, and infrared wavelength's image sensors. The images of each wavelength band for the test area were analyzed and the correlation between the distribution of vegetation index and the vegetation index were compared with status of the previously surveyed vegetation and ground cover. The ability to perform vegetation state detection using images obtained by mounting multiple image sensors on low cost UAV was investigated. As the utility of UAS equipped with VIS_RGB, BG_NIR and TIR image sensors on the low cost UAV has proven to be more economical and efficient than previous vegetation survey methods that depend on satellites and aerial images, is expected to be used in areas such as precision agriculture, water and forest research.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.1
• /
• pp.9-17
• /
• 2007

In this study, Digital Elevation Models (DEMs) were constructed from color images, grayscale images and each bands (Red, Green, Blue) of color image, and the accuracies of each DEMs were evaluated, And then, correlation coefficients between left and right images of each stereopairs were analyzed. The DEM can be constructed conventionally from the digital map and stereopair images using image matching. The image matching requires stereo satellite images or aerial photographs. In case of rotor aerial photographs, these are to be scanned in 3 bands (Red, Green, Blue). For this study, 5 types of images were acquired; color, grayscale, RED band, GREEN band, and BLUE band image. DEMs were constructed from 5 types of stereopair images and evaluated using elevation points of digital maps. In order to analyze the cause of various accuracies of each DEMs, the similarity between left and right images of each stereopairs were analyzed. Consequently, the accuracy of the DEM constructed from RED band images of color aerial photograph were proved best.