• Korean Chemical Engineering Research
• /
• 제48권5호
• /
• pp.568-573
• /
• 2010

본 연구에서는 polyester 섬유표면에 활성기를 부여하기 위한 전처리제로 isocyanate를 이용하여 농도에 따른 접착력을 평가하였다. 이 후 HNBR compound와 polyester fabric의 접착 시 접착력이 우수한 RFL 용액용 latex 선정 및 F/R mole ratio, F/R resin/latex 무게 비에 따른 실험을 진행하였다. 그 결과 전처리제의 농도가 7 wt%인 경우 가장 높은 접착력을 나타내었으며, RFL 용액용 latex로는 HNBR 컴파운드와 상용성이 높은 NBR latex가 우수한 결과를 나타내었고 F/R mole ratio, FR resin/latex 무게비가 각각 1/1, 20%일 때 가장 높은 접착력을 나타내었다. 또한, peel test와 FTIR 분석을 이용해 RF resin의 열처리 온도에 따른 접착강도와 spectra의 peak 변화를 평가해 본 결과 최적의 열처리 온도는 $200^{\circ}C$이었다.

• 한국염색가공학회지
• /
• 제30권2호
• /
• pp.77-89
• /
• 2018

In the case of fiber/rubber composites for tire applications, the interfacial adhesion between fiber and rubber significantly affects the physical properties of the finished products. Generally, organic synthetic fibers used for tire cords are treated with resorcinol formaldehyde latex(RFL) primer on the surface of the fiber to improve the adhesion to rubber. Changes of adhesion between rubber and tire cords might weaken as temperature rises due to overheating of car engine and friction with road. In this study, the effects of temperature on the primer treated polyketone cord/rubber composites and the changes in interfacial adhesion were investigated. Polyketone cord/rubber composites were prepared after RFL solution treatment on the surface of polyketone fibers. After that, composites was thermally aged at different temperature conditions(60, 80, 100, $120^{\circ}C$) and times(1, 5, 10, 15days). The adhesion strength of polyketone cord/rubber composite treated with RFL primer was higher than untreated composite by more than 3 times. After heat aging, the adhesion strength of untreated polyketone cord/rubber composites increased while the RFL treated polyketone cord/rubber composites decreased somewhat.

• Elastomers and Composites
• /
• 제29권5호
• /
• pp.444-452
• /
• 1994

Emulsion graft copolymerizations of vinyl monomers, butyl acrylate(BA), methyl methacrylate(MMA), 2-ethylhexyl acrylate (EHA), glycidyl methacrylate (GMA), 2-hydroxyethyl methacrylate(HEMA), methacrylonitrile(MAN), dimethylaminoethyl methacrylate(DAMA) or 2-vinyl pyridine(VP), onto carboxyl-terminated SBR latex were carried out under different experimental conditions. In case of synthesizing SBR-g-poly(butyl acrylate), the degree of grafting was increased with increasing the amount of emulsifier, polymerization temperature and the amount of initiator. Pull-out strength of resorcinol-formaldehyde-latex(RFL) adhesives formulated with modified latexes was very higher than that of RFL adhesive formulated with ungrafted latex. When the modified latexes with GMA, HEMA, MAN, DAMA or VP were used, the break occurred at cords. Peel strength of RFL adhesives formulated with SBR-g-poly(GMA), SBR-g-poly(HEMA) or SBR-g-poly(VP) was higher by about 1.3 times than that of RFL adhesives formulated with unmodified SBR against nylon cord and was higher by about 2.0 times against polyester cord.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.119-126
• /
• 1999

The rolling fatigue lives (RFL) of five kinds of silicon nitride balls were investigated. Four kinds of Si$_3$N$_4$ balls were fabricated using different raw materials, sintering aids and sintering conditions, Commercially available Si3N4 ball was also studied for comparison. All the balls were finished up to the dimensional accuracy of Grade 10 defined in KS B 2001 (Steel Balls for Ball Bearings) with a size of 9.525mm. RFL tests were then conducted under the initial theoretical maximum contact stress 6.38 GPa and the spindle speed 10,000 rpm. Gear oil was provided by oiled race as lubricant. The results of RFL test indicated the prerequisitic conditions for the long rolling life of Si$_3$N$_4$ball : (1) the high density, (2) mjcrostructures consisted of small uniformly distributed grains, (3) little glassy phase in grainboundary, and (4) little crystalline phase and secondary phase that induces residual thermal stress due to the differences of thermal expansion coefficient with Si$_3$N$_4$Phase.

• Tribology and Lubricants
• /
• 제15권2호
• /
• pp.150-155
• /
• 1999

The rolling fatigue lives (RFL) of five kinds of silicon nitride balls were investigated. Four kinds of Si$_3$N$_4$balls were fabricated using different raw materials, sintering aids and sintering conditions. Commercially available Si$_3$N$_4$ball was also studied for comparison. All the balls were finished up to the dimensional accuracy of Grade 10 defined in KS B 2001 (Steel Balls fer Ball Bearings) with a size of 9.525 mm. RFL tests were then conducted under the initial theoretical maximum contact stress 6.38 GPa and the spindle speed 10,000 rpm. Gear oil was provided by oiled race as lubricant. The results of RFL test indicated the prerequisitic conditions for the long rolling life of Si$_3$N$_4$ball : (1) the high density, (2) microstructures consisted of small uniformly distributed grains, (3) little glassy phase in grainboundary, and (4) little crystalline phase and secondary phase that induces residual thermal stress due to the differences of thermal expansion coefficient with Si$_3$N$_4$phase.

• 산업식품공학
• /
• 제15권4호
• /
• pp.413-419
• /
• 2011

쌀단백질을 이용한 고부가가치 천연 조미소재를 개발하기 위하여 쌀단백질을 프로테아제로 효소분해한 배지에서 Saccharomyces cerevisiae를 배양하여 제조한 효모 추출물(Yx)에, 효소분해 후 남은 쌀단백질 잔사를 Bacillus licheniformis 혹은 Bacillus subtilis로 발효하여 얻은 발효물(Rfl, Rfs)을 각각 첨가하였다. 쌀단백질 잔사의 발효물이 첨가된 효모추출물(YxRfl, YxRfs)의 전체적 선호도는 첨가전의 효모추출물(Yx)에 비하여 높았으며, 특히 쌀단백질 발효물의 보충에 의해서 감칠맛과 같은 풍미가 증가함을 미각센서 분석 및 관능검사에 의해서 확인할 수 있었다. 쌀단백질 잔사발효물에 의한 감칠맛의 상승은 감칠맛을 내는 아미노산 이 외에도 쌀단백질의 발효에 따라 유리된 다양한 펩타이드 분획의 영향이 있었을 것으로 예상된다. 이와 같이 감칠맛 아미노산 및 펩타이드가 함유된 쌀단백질 발효물이 보충된 효모추출물은 감칠맛과 풍미의 상승작용으로 전체적인 기호도가 높아짐에 따라 고부가가치 천연조미소재의 제조에 응용될 수 있을 것으로 기대되었다.

• 한국전문물리치료학회지
• /
• 제4권2호
• /
• pp.66-76
• /
• 1997

The purpose of this study was to compare the integrated electromyographic activity ratios of vastus lateralis(VL); rectus femoris lateral portion (RFL); rectus femoris medial portion(RFM); and vastus medialis(VM) muscles of 30 healthy subjects under three proprioceptive neuromuscular facilitation(PNF) techniques. Each subject was randomly assigned to one of 3 PNF techniques groups : slow reversal(SR), slow reversal hold(SRH) and rhythmic stabilization (RS). Each person was positioned in supine with the right hip flexed to $45^{\circ}$ and the knee fully extended and received a total of 6 sessions. Each technique was applied to the right lower extremity in two diagonal patterns while electrical activity was monitored from the ipsilateral muscles VL, RFL, RFM, and VM, respectively. Comparison of normalized mean EMG magnitudes from VL, VM showed that RS demonstrated significantly greater activity than that of SR or SRH and that RFL and RFM did not demonstrate any greater relative EMG activity with the three PNF techniques than did VL or VM.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.321-321
• /
• 2017

Water availability in rainfed lowlands (RFL) is strongly affected by climate change. In RFL, rice plants are exposed to soil moisture fluctuations (SMF) but rarely to simple progressive drought as widely believed. Typical RFL field is characterized by a about 5-cm thick high bulk density hardpan layer underneath the cultivated layer at about 20 cm depth that impedes deep root development. Root system has the ability to develop in response to changes in SMF, known as phenotypic plasticity. We hypothesized that genotypes that can adapt to RFL have root plasticity. The roots can sharply respond to re-wetting after drought period and thus penetrate the hardpan layer when the hardpan is wet and so becomes relatively soft, and thus access water under the hardpan. This study aimed to identify CSSLs derived from a cross between Sasanishiki and Habataki which adapted to such RFL conditions. We used 39 CSSLs together with the parent Sasanishiki, which were grown in hydroponics and pot under transient soil moisture stresses (drought and then rewatering), and compared with continuously well-watered (WW) (control) up to 14 days after sowing (DAS), and 20 DAS, respectively. Based on the results of hydroponics and pot experiments, we selected a few lines, which were grown in the soil-filled rootbox with artificial hardpan layer and without artificial hardpan. For the rootbox without artificial hardpan, plants were grown under WW and transient soil moisture stresses for 49 DAS. While the rootbox with artificial hardpan, the plants were grown under WW (control) and SMF (WW up to 21 DAS, 1st drought (22-36 DAS), rewatering (37-44 DAS), and followed by 2nd drought (45-58 DAS)). Among the 39 CSSLs, only CSSL439 (SL39) consistently showed significantly higher shoot dry weight (SDW) than Sasanishiki under transient soil moisture stress conditions as well as SMF conditions in all the experiments. Furthermore, under WW, SL39 consistently showed no significant differences from Sasanishiki in shoot and root growth in most of traits examined. SL39 showed significantly greater total root length (TRL) than Sasanishiki under transient soil moisture stress, which is considered as phenotypic plasticity in response to rewatering after drought period. Such plastic root development was the key trait that effectively contributed to root elongation and branching during the rewatering period and consequently enhanced the root to penetrate hardpan layer when the soil penetration resistance at hardpan layer reduced. In addition, using the rootbox with artificial hardpan layer ($1.7g\;cm^{-3}$, heavily compacted), SL39 showed greater root system development than Sasanishiki under SMF, which was expressed in its significantly higher TRL, total nodal RL, and total lateral RL at hardpan layer as well as at below the hardpan layer. These results prove that SL39 has plasticity that enables its root systems to penetrate hardpan layer in response to rewatering. Under SMF, such root plasticity contributed to its higher gs and Pn.

• 한국경영정보학회:학술대회논문집
• /
• 한국경영정보학회 2007년도 International Conference
• /
• pp.951-958
• /
• 2007

Radio Frequency Identification (RFID) is a technology for automated identification of objects and people. RFID may be viewed as a means of explicitly labeling objects to facilitate their "perception" by computing devices. RFlD systems have been gaining more popularity in areas especially in supply chain management and automated identification systems. However, there are many existing and potential problems in the RFlD systems which could threat the technology s future. To successfully adopt RFID technology in various applications. we need to develop the solutions to protect the RFID system s data information. This study investigates important issues related to privacy and security of RF1D based on the recent literature and suggests solutions to cope with the problem.

• 정보보호학회논문지
• /
• 제21권1호
• /
• pp.117-123
• /
• 2011

RFID 태그의 연산 능력의 제한으로 인해 RFID 시스템은 경량화된 인증 프로토콜을 필요로 하며, 최근 몇 년간 이에 대한 연구가 이루어져왔다. 본 논문에서는 RFID 시스템을 위한 경량화된 인증 프로토콜인 HB 프로토콜과 그 변형 프로토콜들에 대해 살펴보고 해당 프로토콜의 공격에 대해서 살펴본다. 그 중에서도 HB++ 프로토콜에 대한 Piramuthu의 공격이 문제가 있음을 지적하고 안전한 프로토콜을 위한 설정을 제안한다.