• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.8
• /
• pp.694-700
• /
• 2009

In this paper, we propose a RFID tag antenna with low performance degradation due to nearby dielectric materials. The proposed antenna is designed to be appropriate for ink printing fabrication. The antenna is designed to operate in UHF band of $860{\sim}960$ MHz. The antenna uses a T-matching network in the middle of the main body and two parasitic patches in vicinity for complex conjugate matching with a commercial tag chip. In addition, the two parasitic patches induce currents at different dielectric constants of nearby dielectric materials. This can minimize the performance degradation due to nearby dielectric materials. The measured results show the half power matching bandwidth from 844 MHT to 1,268 MHz. It exhibits the reading distance of about 3.5 m in free space when the tag antenna is used with the commercial reader antenna (transmitting power of 20 dBm and the reader antenna gain of 6 dBi). When the tag is attached on dielectric materials of wood and FR4, the resulting reading distances are 2.61 m and 2.51 m, respectively.

• Journal of Korea Multimedia Society
• /
• v.14 no.2
• /
• pp.194-200
• /
• 2011

Recently, RFID(Radio Frequency IDentification) market spread in industry region is entering a phase of stagnation due to cost issue. RFID tag inlay cost has become relatively more expensive due to the recent decrease in chip price. Therefore, a simple and rapid design technique for RFID tag has yet to be implemented to achieve low cost. This paper presents a design technique considering chip impedance for antenna design for improved accuracy and computation time. As a result, it is confirmed that analysis error for resonance ranges within 20MHz and readable range error falls within 1.5m.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.12 s.103
• /
• pp.1206-1212
• /
• 2005

In this paper, we propose a novel antenna structure which uses the electric and magnetic currents so as to eliminate nulls on their radiation pattern. The tag antenna was matched to the conjugate impedance of the commercial tag chip using the modified double T matching network. The radiation efficiency is about $90\%$, and the bandwidth($S_{11}< -10 dB$) is 848${\~}$926 MHz. Also it shows the gain deviation between the maximum and minimum gains about 4 dB at any direction of the tag antenna at the operating frequency. The readable range of the tag is 1.7${\~}$2.4 m for an arbitrary rotation angle of the tag with a commercial tag chip.

• Journal of Internet Computing and Services
• /
• v.9 no.1
• /
• pp.43-54
• /
• 2008

In this paper, we implement an automatic entity information management system for smart refrigerator using RFID technology in which objects containing electronic tags are automatically identified using radio wave. Unlike current "smart" refrigerators, the system presented in this paper implements smart tag information acquisition mechanism and real-time information management system to provide various information on entities in refrigerators to local and remote users. As the first step, this paper analyzes the requirements for smart refrigerator system based on the RFID and suggests design considerations. Based on the analysis, we propose and implement an efficient tag location tracking method based on antenna transfer method and an intelligent tag information management system based on embedded database and web server. We also provide a wide range of experimental results on the number of tags identified at a time and the tag recognition ratio according to the RFID antenna transfer speed and the angle between tag reader and tags.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.353-356
• /
• 2005

There have been many researches on the antenna performance degradation with the presence of the human body around the antenna structure to accomodate personal communication service [1][2]. To better understand the human body effects on the antenna resonance, radiation pattern, and input impedance, simulation was carried out with changing of the distance between antenna and lossy material. Effects on the antenna performance by the surrounding materials are also important in the case of the RFID system. It is desirable that the tag antennas for RFID system must reveal isotropic radiation pattern as well as attain the good impedance matching. In this paper, we investigated the antenna resonance and input impedance characteristic when there exist a lossy material sphere near various types of antenna at 900 MHz. In short antenna resonance was mostly affected by lossy material in the case of a rectangular loop antenna, and impedance variation was smallest in the case of a halfwave dipole.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.12
• /
• pp.1148-1157
• /
• 2013

In a passive UHF RFID system, the impedance matching between tag antenna and chip as well as the protocol parameter settings in a reader plays important role in determination of the maximum read-range. Almost no paper, however, has dealt with the above issues in relation with the maximum read range. In this paper, two known methods (of using the value from data sheets and proprietary RFID tester) and our proposing method in chip impedance evaluation are compared in terms of maximum read range. The read range of tags whose antenna impedance is conjugate matched with the chip impedance obtained from the proposed method is improved maximum 73 % more than that of tags from the other methods.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.6
• /
• pp.535-543
• /
• 2009

This paper describes a design for RFID(Radio Frequency Identification) tag antenna using license plate attached the vehicle bumper in 900 MHz band. The proposed tag antenna size which is located on upper center position of a vehicle license plate is 162.5${\times}$40${\times}$1 mm$^3$. A resonant frequency of design antenna and the bandwidth which has return loss of -10 dB below are 900 MHz and about 720 MHz(640${\sim}$1,360 MHz), respectively. The commercial chip impedance considered on design was 16- j131 ${\Omega}$ and the complex conjugate impedance of chip was used as input impedance of tag antenna. The measured return loss and radiation pattern were agreed well with the calculated results. The measured readable range of the proposed tag antenna designed on only the vehicle license plate was 11.5 m. Moreover, its range of the fabricated tag antenna that the license plate and the vehicle bumper were fixed by volt and nut was observed 10.4 m. These measured readable range showed about 5 m above far distance more than the average readable range of commercial tag antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.4 s.119
• /
• pp.398-407
• /
• 2007

In this paper we proposed the tag antenna with a low performance distortion from an attached surface material using the asymmetric dual-arm dipole antenna(ADDA) structure. The tag is designed to exhibit low performance changes when the tag is attached on a target object(the medical litter receptacle, ${\varepsilon}_r=1.7,\;tan\;{\delta}=0.002$). Detail design parameters for the proposed antenna are optimized to maintain a good readable range in free-space as well as on a target object. The size of the optimized antenna is $100\;mm{\times}50\;mm$. The antenna shows the matching bandwidth($S_{11}$< -10 dB) of 3.7 % and the radiation efficiency of 80 % at the operating frequency. Finally we confirmed the readable range of the tag antenna by measurement and it shows about 5.3 m in free space and 5.5 m on the target object.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.101-110
• /
• 2007

This study has designed a circular polarization antenna for UHF bandwidth RFID reader. As a result of performance test of the antenna designed it is found that return loss (S11) is about -45.529dB at 914MHz, which is relatively small, and antenna gain is about 6.09dBi. It has also been confirmed that $50{\Omega}$ impedance matching is about $50.48{$\Omega}$ and it can be applied to every RFID reader. Therefore, the antenna is designed to have higher gain of circular polarization by improving reception, which is one of the most important parameters of RFID reader and is expected to be extensively used to recognize multi-tag in the distance.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.151-154
• /
• 2007

This paper describes the project for constructing a traceability system for producing using RFID antenna in 900MHz frequency band and the consideration. In this project we reviewed analysis of properties classified by production process and RFID system through each frequency band, and designed a single unit RFID reader including antenna. The developed antenna is optimized to a field condition and this paper will show the test results. Also, we designed a single unit RFID reader by adding a reader to a designed antenna and explained the rule of tag memory allocation. Lastly, after running the system we could calculate visible and invisible effects of operation results and check up a wide possibility of application for RFID.