• 한국정보통신학회논문지
• /
• 제13권1호
• /
• pp.193-198
• /
• 2009

본 논문에서는 최근에 널리 사용되고 있는 RFID 설계 Tool인 HFSS를 이용하여 UHF RFID 세라믹 안테나를 개발하였다. 개발한 세라믹 안테나는 HFSS를 이용하여 반사손실(Return Loss)과 스미스 차트(Smith Chart)를 통해 특성을 분석하였다. HFSS 설계를 바탕으로 세라믹 안테나를 제작하였고, 네트워크 분석기(Network Analyzer)를 이용하여 임피던스 매칭과 이득을 측정하여 성능을 분석하였다. 그리고 UHF RFID 휴대용 단말기에 세라믹 안테나를 부착하여 일반적으로 널리 사용되는5가지 형태의 RFID 태그(Tag)에 대해서 거리측정을 실시하여 그 성능을 입증하였다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.181-185
• /
• 2008

Recently, location based service(LBS) expended based on personal specialized service, however since commercialized GPS based emergency rescue service comes with shadow zone for GPS signal such as inside building, the accuracy and reliability are not guaranteed. Therefore to improve such problem, we propose an active location detecting algorithm using RFID-TAG and Yagiantenna. To track the location of RFID-TAG where signal is generated, location tracking device in which Yagi-Antenna is installed moves around. Since directed wave and reflected wave co-exist during signal reception, final signal generated location is searched by setting up multiple of locations where signal can be generated on the map and moving location tracking device along minimum length of path. The algorithm proposed in this paper was verified of its technical validity through simulator.

• 한국정밀공학회지
• /
• 제25권11호
• /
• pp.90-94
• /
• 2008

Recently, a great deal of research is focused on the printed electronics. One of their mainly concerned products is printed RFID tag. RFID technology has attracted researchers and enterprises as a promising method for automatic identification, and they are expected to replace conventional bar codes in inventory tracking and management. The key to successful RFID technology lies in developing low-cost RFID tags and the first step in applying printing technology to RFID systems is to replace antennas that are conventionally produced by etching copper or aluminum. However, due to the printing quality variations, errors, and lower conductivity, the performance of the printed RFID antennas is lower than that of antennas manufactured by conventional etching methods. In this paper, the effect of variations in the printing conditions on the antenna performance is investigated. Three levels for each condition parameter is assumed and effect on the resonant frequency are examined experimentally based on orthogonal array. The most serious factor that affects the resonant frequency of the antenna is the non-uniformity of the edge and the resonant frequency is found to be lower as the non-uniformity increases.

• 한국통신학회논문지
• /
• 제36권12B호
• /
• pp.1680-1685
• /
• 2011

본 논문에서는 동물의 표피와 근육질 사이 체내에 주입할 수 있는 UHF 대역의 RFID 태그를 개발하였으며, 그 태그를 사용한 동물정보관리 시스템을 개발 하였다. 일반 상용 태그는 동물의 체내에서 동작하지 않으므로 체지방과 근육의 유전율을 고려하여서 태그를 설계 하였다. 태그는 피부 밑에 삽입이 쉽도록 끝이 뾰족하게 그리고 얇게 설계되었다. 태그의 성능을 동물의 근육과 표피 안에서 검증하였다. 동물정보관리시스템은 개발된 태그를 사용하여 동물들의 종류, 병력, 주인의 정보, 주소지 등을 관리 할 수 있다. 개발된 프로그램과 태그는 군견이나 경찰견 관리용으로 사용이 가능하다.

• Journal of Electrical Engineering and Technology
• /
• 제6권4호
• /
• pp.551-555
• /
• 2011

The Crab label tag with a loop matching feed and a modified dipole antenna structure was proposed. The antenna impedance is conjugated easily to a radio frequency identification IC chip impedance by a loop matching feed. The reading range of the crab structure tag is 0.9-1.0 m from the upper side of the formula milk can lid. The fabricated label tag size is $44.0{\times}44.0mm^2$. The operating frequency at -3 dB return loss is 861.0-929.0 MHz, and the maximum reading range at the anechoic chamber is 1.5 m.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.241-244
• /
• 2005

본 논문에서는 UHF 대역 수동형 RFID 태그 안테나의 최적 설계에 필요한 요소들과 전파 음영 문제를 최소화 할 수 있는 다중 리더 안테나 방식에 대하여 분석하였다. 또한, 칩 설계시 RCS 특성이 우수한 칩 임피던스 범위를 설정해 보았으며, 등방성 방사패턴을 갖는 태그 안테나의 필요성과 설계 예를 보였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.33-34
• /
• 2007

LBS has many issues of wireless sensor networks and mobile communication parts. Location tracking or location sensing will be the opening of ubiquitous society's a big challenge and the beginning of infinite ubiquitous society's a chance. The purpose of this paper is study of sensing rate per reader antenna's placement and tag location and placement using RFID as location reference point with many advantages for location detection.

• 한국철도학회논문집
• /
• 제4권4호
• /
• pp.155-161
• /
• 2001

In this paper, the method is suggested to prevent data collision or damage on RFID(Radio Frequency Identification) system, in case a reader reading multi-tag simultaneously, using binary-search algorithm and Time-domain anti-collision procedure at reader and tag, respectively. The RFID system is designed that Reader enable to communicate with Tag on 13.56MHz bandwidth which is ISM(Industrial Science Medical) bandwidth, antennas of Tag part are designed using MCRF335 Chip. When RF communication is achieved between reader and tag, in case that data is transmitted to reader pass through multiple tags simultaneously, a study on the anti-collision method for the situation that the data collision occurs is performed.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 2006년도 하계종합학술발표회 논문 초록집
• /
• pp.259-259
• /
• 2006

• Journal of electromagnetic engineering and science
• /
• 제7권1호
• /
• pp.12-16
• /
• 2007

A UHF band wireless identification system based on passive surface acoustic wave(SAW) devices is presented in this paper. SAW ID tags were fabricated on Y-Z $LiNbO_3$ piezoelectric substrate with a good electro-mechanical coupling property. To reduce degradation of the antenna performance associated with the piezoelectric materials, an efficient design of the SAW RFID antenna is introduced. By measuring the parameters of the SAW ID tag, the performance of the antenna was tested by experimentation.