• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.401-403
• /
• 2006

When RF overlay technology is used in EPON-based optical access network, there coexist the directly modulated 1310-nm upstream data, the directly modulated 1490-nm downstream data, and the amplitude-modulated l550-nm downstream broadcast signal based on RF overlay technology. In this paper, we analyze the spectrum of 8B/10B IDLE line code signal and the SRS effect of l490-nm IDLE line code signal on 1550-nm signal. From the result of analysis, we propose a new technique that can be used to improve the CNR of the broadcast signal, which is based on self synchronous scramble method.

• Journal of Korea Multimedia Society
• /
• v.10 no.4
• /
• pp.548-558
• /
• 2007

This paper presents a method of location sensing of mobile objects using RF devices. By analyzing signal strengths between a certain number of fixed RF devices and a moving RF device, we can recognize the location of a moving object in real time. Firstly, signal strength values between RF devices are gathered, and then the values are normalized and constructed as a model feature vector for specific location. A number of model patterns are acquired and registered for all of the location which we want to recognize. For location sensing, signal strength information for an arbitrary moving RF device is acquired and compared with model feature vectors registered previously. In this case, distance value is calculated and the moving RF device is classified as one of the known model patterns. Experimental results show that our methods have performed the location sensing successfully with 100% rate of recognition when the number of fixed RF devices is 10 or more than 12. In terms of cost and applicability, experimental results seem to be very encouraging.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.1
• /
• pp.39-45
• /
• 2011

In this paper, the design method of portable signal analysis system is proposed and the hardware module is implemented for operation of base stations based on a common platform for mobile WiMax. The new signal analysis method is implemented as two modules; a broadband RF module and a DSP based digital signal analysis module. The RF module performs the RF-IF down conversion and gain control. And the digital module measure the base staion signal. The differences of performance are insignificant in the experiment results performed through the comparison of other fixed-large system and proposed system.

• International journal of advanced smart convergence
• /
• v.11 no.3
• /
• pp.28-35
• /
• 2022

Interference always exists between wireless communication systems used in the same frequency band or adjacent frequency bands. In order to deploy a new wireless communication system such as a 5G system, a new frequency band must be allocated to the system. For this purpose, after analyzing interference between the existing system and the new system, a method of setting a frequency guard band or a minimum separation distance has been used as a passive method to limit the interference effect. This paper presents a wideband RF IRM(Interference Reduction Module) that can actively reduce the influence of interference between wireless communication systems. The wideband RF IRM can reduce the interference effects of 5G signals on satellite signals. The principle and structure of the wideband RF IRM are presented. The wideband RF IRM can suppress approximately 20dB of interference signal in 100MHz bandwidth when only interference signal exists. It also shows that when a 5G interference signal of -45dBm/100MHz and a satellite signal of -55dBm/40MHz exist simultaneously at a center frequency of 3.83GHz, about 15dB of 5G interference signal can be reduced in the frequency range covered by the satellite signal. The experimental results demonstrate that the wideband RF IRM can actively reduce the 5G interference signal on the satellite signal and can be used for the purpose of reducing the interference effect in a similar environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11A
• /
• pp.909-917
• /
• 2009

In this paper, we proposed and implemented the method to efficiently generate TDD synchronization signal and the digital circuit for the RF repeater which can eliminate the shadow region in the wireless communication field using the time division duplex (TDD) method. After detecting the TDD signal from the transmitted or received RF signal, the detected TDD signal is fed to the RF repeater for the normal operation. The proposed technique detects the envelop of the downlink signal and amplifies the detected envelop, and then restores the degraded envelop with the proposed digital filtering method. Finally the restored envelop is manipulated to the TDD synchronization signal. Our focus on the proposed algorithm is to develop it with simple feature and low cost but robust performance. The proposed scheme was implemented to the integrated system which has both RF and digital circuit and tested under the same condition with the commercial WiBro service.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.145-148
• /
• 2002

This paper has been studied a predistorter which is able to linierizing of RF amplifier using schottkey. If input signal level is low, input signal is delivered directly. And if input signal level is high, input signal Is delivered with decreasing. So RF amplifier always works at saturation region .When this predistorter is used to simplified C-class RF amplifier, we have concluded that efficiency is improved about 3%.

• 전자공학회논문지 IE
• /
• v.45 no.1
• /
• pp.38-43
• /
• 2008

This paper presents a new interference cancellation method to remove the oscillation due to feedback signal of RF relay. In this paper, we estimate the feedback signal using to LMS(Least Mean Square) algorithm and remove the interference through attenuation signal arbitrary corresponding to feedback signal. From the various performance analysis for various doppler effects, a proposed method prevents from oscillation using -30dB attenuation signal as a cancellation value of feedback signal.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2003.11a
• /
• pp.175-179
• /
• 2003

In this paper, we developed a DTV RF (Radio frequency) capture, analysis, and regeneration system adapting digital signal processing and high speed hard disk interfacing techniques and analyzed characteristics of captured RF signal. This system can be used in the various field of DTV transmission because this system can capture the receiving real DTV signals and analyze captured RF signals that contain the complex characteristics of the real-world RF environments and regenerate it in a laboratory without the performance degradation. The system can capture and replay the DTV RF signals in real-time on hard disk. Therefore, there is no limit for the amount of captured data with in the installed storage capacity. We can expect various possible applications for this system such as a tool for the development of the receiver performance analysis, design, and analysis for the DTV coverage areas, etc. This system can also be used as RF signal analyzer.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.11
• /
• pp.3789-3809
• /
• 2014

Radio environment maps (REMs) and geolocation database represent an important source of information for the operation of cognitive radio networks, replacing or complementing spectrum sensing information. This paper provides a survey of methods for constructing the radio frequency layer of radio environment map (RF-REM) using distributed measurements of the signal levels at a given frequency in space and time. The signal level measurements can be obtained from fixed or mobile devices capable of sensing radio environment and sending this information to the REM. The signal measurements are complemented with information already stored in different REM content layers. The combined information is applied for estimation of the RF-REM layer. The RF-REM construction methods are compared, and their advantages and disadvantages with respect to the spatial distribution of signal measurements and computational complexity is given. This survey also indicates possible directions of further research in indirect RF-REM construction methods. It emphasizes that accurate RF-REM construction methods should in the best case support operation with random and clustered signal measurements, their operation should not be affected by measurements outliers, and it must estimate signal levels comparably on all RF-REM locations with moderate computational effort.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.4
• /
• pp.173-180
• /
• 2015

In this study, an algorithm that detects a spoofing signal for a GPS L1 signal was proposed, and the performance was verified through RF spoofing signal simulation. The proposed algorithm determines the reception of a spoofing signal by detecting a correlation distortion of GPS L1 C/A code caused by the spoofing signal. To detect the correlation distortion, a detection criterion of a spoofing signal was derived from the relationship among the Early, Prompt, and Late tap correlation values of a receiver correlator; and a detection threshold was calculated from the false alarm probability of spoofing signal detection. In this study, an RF spoofing environment was built using the GSS 8000 simulator (Spirent). For the RF spoofing signal generated from the simulator, the RF spoofing environment was verified using the commercial receiver DL-V3 (Novatel Inc.). To verify the performance of the proposed algorithm, the RF signal was stored as IF band data using a USRP signal collector (NI) so that the data could be processed by a CNU software receiver (software defined radio). For the performance of the proposed algorithm, results were obtained using the correlation value of the software receiver, and the performance was verified through the detection of a spoofing signal and the detection time of a spoofing signal.