• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.154-157
• /
• 2008

A class-E RF(Radio Frequency) power amplifier for wireless application is designed using standard CMOS technology. To drive the class-E power amplifier, a class-F RF power amplifier is used and the reliability characteristics are studied with a class-E load network. The reliability characteristic is improved when a finite-DC feed inductor is used instead of an RF choke with the load. After one year of operating, when the load is an RF choke the output current and voltage of the power amplifier decrease about 17% compared to initial values. But when the load is a finite DC-feed inductor the output current and voltage decrease 9.7%. The S-parameter such as input reflection coefficient(S11) and the forward transmission scattering parameter(S21) is simulated with the stress time. In a finite DC-feed inductor the characteristics of S-parameter are changed slightly compared to an RF-choke inductor. From the simulation results, the class-E power amplifier with a finite DC-feed inductor shows superior reliability characteristics compared to power amplifier using an RF choke.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.2
• /
• pp.363-368
• /
• 2009

In the paper, we confirmed improvement Noise figure of the entire RF front-end using spiral inductor with PGS(Patterned Ground Shield) and current bleeding techniques. LNA design is to achieve simultaneous noise and input matching. Spiral inductor in input circuit of LNA inserted PGS for betterment of Q-factor. we modeling inductor using EM simulator, so compared with inductor of TSMC 0.18um. We designed and simulation the optimum structure of PGS using Taguchi's method. We confirmed enhancement of noise figure at LNA after substituted for inductor with PGS. Mixer designed using current bleeding techniques for reduced noise. We designed LNA using inductor with PGS and Mixer using current bleeding techniques, so confirmed improvement of noise figure.

• Journal of the Korean Magnetics Society
• /
• v.11 no.6
• /
• pp.239-244
• /
• 2001

Recently, RF inductor having researched by many workers, we fabricated and investigated properties of RF inductors. In order to improve the Q-factor (Quality), we try to apply the patterned Fe$_{78.81}$Ta$_{8.47}$N$_{12.71}$ soft magnetic thin film of 5000 which shows magnetic anisotropy of 30 Oe. Thus, patterned magnetic film was artificially increased magnetic anisotropy lead to increasing of ferro-magnetic resonance frequency up to GHz band. Coil as part of inductor was fabricated by lift off process. The dimension of RF inductor was designed 47un, rectangular shape, and measured properties. In the case of Ti/Ag air core type inductor shows Q of 9, inductance of 8.4 nH at 2 GHz. Magnetic film employed inductor shows inductance of 9 nH and FMR resonance frequency was 700 MHz.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.2
• /
• pp.83-87
• /
• 2004

Phase noise performance and current consumption of Radio Frequency (RF) Voltage-Controlled Oscillator (VCO) are largely dependent on the Quality (Q) factor of inductor-capacitor (LC) tank. Because the Q-factor of LC tank is determined by on-chip spiral inductor, we designed, analyzed, and modeled on-chip differential inductor to enhance differential Q-factor, reduce current consumption and save silicon area. The simulated inductance is 3.3 nH and Q-factor is 15 at 2 GHz. Self-resonance frequency is as high as 13 GHz. To verify its use to RF applications, we designed 2 GHz differential LC VCO. The measurement result of phase noise is -112 dBc/Hz at an offset frequency of 100 kHz from a 2GHz carrier frequency. Tuning range is about 500 MHz (25%), and current consumption varies from 5mA to 8.4 mA using bias control technique. Implemented in $0.35-{\mu}m$ SiGe BiCMOS technology, the VCO occupies $400\;um{\times}800\;um$ of silicon area.

• Journal of information and communication convergence engineering
• /
• v.9 no.1
• /
• pp.11-15
• /
• 2011

A Differential line inductor is proposed for a differential power amplifier. The proposed differential line inductor is composed of two conventional line inductors rearranged to make the current direction of the two line inductors identical. The proposed line inductor is simulated with a 2.5-D and a 3-D EM simulator to verify its feasibility with the substrate information in a 0.18-${\mu}m$ RF CMOS process. The inductances of various line inductors implemented with printed circuit boards were measured. The feasibility of the proposed line inductor was successfully demonstrated.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.796-800
• /
• 2004

The main research on this paper is to model on-chip inductor in digital CMOS technology by using the foundry parameters and the physical structure. The s-parameters of a spiral inductor are extracted from the modeled equivalent circuit and then compared to the results obtained from HFSS. The structure and material of the inductor used for modeling in this work is identical with those of the inductor fabricated by CMOS process. To show why the modeled inductor instead of ideal inductor should be used to design a RF system, we designed dual band RF front-end receiver and then compared the results between when using the ideal inductor and using the modeled inductor.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.2
• /
• pp.68-71
• /
• 2006

A class-E power amplifier is designed using 0.25$\mu$m standard CNMOS technology at 900MHz and the reliability characteristics are studied with the load network. The reliability characteristics is improved when a finite DC-feed inductor is used instead of RF choke. At the one you halt, the PAE(Power Added Efficiency) decreases from 58.0$\%$ to 35.7$\%$ and output power decreases from 120mW to 74mW in power amplifier using RF choke. However, when a finite DC-feed inductor is used with load the PAE decreases from 58.5$\%$ to 54.8$\%$ and output power decreases from 121mW to 112mW. From the simulated results, the class-E power amplifier with a finite DC-feed inductor shows superior reliability characteristics compared to rower amplifier using RF choke inductor.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.261-264
• /
• 2000

본 논문에서는 이동 통신용 단말기에 주로 사용되는 RF-chip inductor의 자동 외관검사를 위한 시스템 개발에 필요한 알고리즘을 제안하였다. 본 논문에서 제안한 방법은 영상취득 후 처리과정에서 동적 이진화 방법, 가산투영 등 영상처리에 관련된 방법을 이용해 코일 부분과 코어부분을 분리한 후 세선화 방법, 라벨링 방법 등을 적용하여 분리된 코일부분에 대해 코일의 감긴 회수와 피치간격의 불균일 검사를 수행하고 기준값 이상의 오차를 갖는 소자를 불량으로 처리하는 보다 개선된 처리방법을 제안하였으며 모의실험을 통해 성능을 검증하였다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.163-167
• /
• 2003

In this paper, an air-suspension type RF MEMS inductor is fabricated, and an appropriate de-embedding scheme for 3-dimenstional MEMS structure is applied and verified with inductance calculation algorithm. With the presented de-embedding method, parasitics from contanct pads and feeding lines are effectively and accurately de-embedded using open and short calibration procedure, and only spiral and posts can be characterized as a high-Q inductor structure. The validity of the de-embedding method is verified by the comparison of the measured and calculated inductances of two 1.5 and 2.5 turn square spiral inductors. The open-short de-embedded inductance error is below 5% each case in comparison with the calculated value based on H.M. Greenhouse's algorithm.

• Journal of the Institute of Convergence Signal Processing
• /
• v.1 no.1
• /
• pp.89-96
• /
• 2000

In this paper, we propose a vision algorithm for the inspection of very small RF-chip inductor which is used in mobile-communication terminal. The proposed method divides coil part from the inductor body by local adaptive thresholding and integral projection method. After dividing work, the coil components are extracted by thinning and labelling techniques. The test items are the number of turns, the intervals in coil, and the measure of uniformity between the extracted lines. If the values of these are more than the specific value a tested product is decided bad one. In the simulation, the proposed method has a good performance.