• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.6
• /
• pp.1051-1057
• /
• 2009

USN(Ubiquitous Sensor Network) is used to provide many services such as bridge monitoring, cultural properties monitoring, river monitoring, protection of an old and feeble person, management and control of a city and circumstance monitoring, etc. A RF transceiver is needed for implementing USN. In this paper the implementation and the design of a RF transceiver for sensor nodes operating in 2.4GHz frequency band are presented. The design procedure of AGC, a receiver and a transmitter is described. And the performance of the implemented RF transceiver is also tested. The test results of receiver sensitivity, receiver dynamic range, frequency stability, phase noise, output power of transmitter, flatness and spectrum mask are presented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.5
• /
• pp.854-859
• /
• 2009

Many pilot projects are developed using USN(Ubiquitous Sensor network). Recently USN has more attention to be used for the applications of circumstance monitoring. In order to acquire information from sensor nodes, sensor nodes need a RF transceiver. In this paper we describe the design of a RF transceiver, based on IEEE 802.15.4, for sensor nodes operating in 2.4GHz frequency band. The architecture to be implemented and the electrical performance specifications satisfied IEEE 802.15.4 are presented. The noise figure of a receiver, selectivity, phase noise of a frequency synthesizer, transmitter's linearity and spectrum mask are derived as a design parameters from the specifications of IEEE 802.15.4.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.11
• /
• pp.978-984
• /
• 2015

In this paper, we designed a RF transceiver operating up to 200 km operating range and 45 Mbps data rate. The RF transceiver operates in Ku band and composed of up/down converter, high power amplifier, front-end elements. To satisfy the operating range of RF transceiver, 10W power amplifier was required and realized by using GaN power amplifier. Moreover, to mitigate mutual interference for different bandwidth signals due to the adaptive transmission speed control function, SAW filter bank structure was used. To verify system requirement satisfaction AWR simulation tool was used.

• Transactions on Semiconductor Engineering
• /
• v.2 no.1
• /
• pp.9-16
• /
• 2024

This paper discusses the design of bio-implanted ultra-low-power MICS RF transceivers for wireless sensor networks. The 400 MHz MICS standard was considered for the implementation of the WBAN wireless sensor system, indirectly minimizing radio propagation losses in the human body and the inference with surrounding networks. This paper includes link budget, various transmission and reception architectures for a system design and ultra-low power transceiver circuit techniques for the implementation of RF transceivers that meet MICS standards.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.6
• /
• pp.600-613
• /
• 1997

The implementation of a BTS(Base station Transceiver) for WLL system using W-CDMA(Wideband-Code Division Multiple Access) method is presented in this paper. It consists of three boards; receiver, transmitter and RF controller. Some RF parameters are considered and simulated by the RF simulation S/W using commercial and customized components specifications. The implemented transceiver of 5 MHz RF channel bandwidth satisfies the system requirements of a transceiver such as dynamic range, sensitivity in the receiver and spurious emission suppression in the transmitter. At the receiver, the experimental measurement showed 2.86 dB of NF and 60 dB above of dynamic range in AGC(Automatic Gain Control) locking. At the transmitter, the -49.46 dBc of spurious emission suppression is attained when the output power of the transmitter is 34.3 dBm. These results are good enough to meet to standard performance specifications.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.10
• /
• pp.779-787
• /
• 2017

In this paper, we designed a RF transceiver for small unmanned aerial vehicle(UAV) using power switching method. To apply for the UAV, several characteristics such as size, weight, and power consumption are very important. To reduce power consumption, we propose a new power switching method. Using the proposed method, we fabricated the RF transceiver needed to establish the data link for a small UAV. The fabricated RF transceiver shows an output power of +25 dBm, a noise figure of 4.56 dB and a received signal strength of -100 dBm. By performing power measurement of proposed switching method, 25 % of power could be reduced. The size of the fabricated RF transceiver is $100{\times}60{\times}5.7mm^3$ and the weight is as small as 38 g.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.1
• /
• pp.61-72
• /
• 1997

The implementation of base station transceiver for Wideband CDMA(Code Division Multiple Access) PCS(Personal Communication Service) system using spread spectrum CDMA technology is presented in this paper. The receiver that requires wide dynamic range and high sensitivity and the transmitter that has good spurious emission supression were designed and implemented with 5 MHz RF channel bandwidth. This paper shows the some factors that should be considered and simulated using the RF simulation S/W with commercial and customized components. The implemented transceiver based on the simulation gave good results that satisfied the functional specifications of the transceiver.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.371-377
• /
• 2015

This paper is about the RF transceiver designed and implementation for common data link. The trasmitter is configured as a frequency up-converter, a power amplifier and a duplexer. The receiver is configured as a duplxer, a frequency down-converter and a low noise amplifier. The maximum transmission distance, the reception sensitivity is designed to meet the electrical and temperature characteristics and the like. Using a modeling and simulation in order to meet the requirements of the RF transceiver has been designed and implemented. Transmitting output power and Noise Figure has been measured with 38.58dBm and 5.5dB, respectively. All of the electrical and temperature specifications was meet. Was confirmed all of the requirement specification by electrical characteristics test and temperature characteristics test.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11A
• /
• pp.933-940
• /
• 2011

In this paper, Ka-band transceiver for road watch radar system is designed and fabricated. The transceiver for road watch radar system is composed of waveform generator, frequency generator. IF transceiver and RF up/down converter. The transceiver especially has 3 different waveform mode for target detection range. The transceiver had over 150 MHz bandwidth in Ka-band and 22 dBm output power. The receiver gain and noise figure was 30 dB and 4 dB respectively. The receive dynamic range was 65.28dB and amplitude imbalance and phase imbalance of I/Q channel was 0.3 dB and 1.8 degree respectively. The transceiver meets the required electrical performances through the individual tests.

• Information and Communications Magazine
• /
• v.32 no.11
• /
• pp.65-76
• /
• 2015

본 논문에서는 5G 이동통신에 적용하기 위한 동일대역 전이중방식 송수신기의 자기간섭제거 기술 동향에 대하여 분석하였다. 전이중방식 송수신기는 기존의 반이중방식 송수신시스템에 비하여 스펙트럼 효율성이 높고, 고속, 고용량의 데이터처리를 제공할 수 있기 때문에 5G 이동통신에서 사용될 송수신기 기술로 연구되고 있다. 전이중방식 송수신기에서 가장 문제가 되는 것은 동일주파수에서 송신과 수신이 이루어지면서 발생하는 자기간섭이며, 이를 해결하기 위한 자기간섭 격리 또는 제거기술이 안테나 및 채널, 아날로그 RF, 디지털 영역으로 구분되어 연구되고 있으며, 최근에는 시스템 측면에서 통신시스템의 성능을 확보하기 위한 연구가 다양하게 이루어지고 있다. 본 논문에서는 자기간섭제거기술의 정의 및 종류, 초기연구동향 그리고 최근 연구동향을 시스템측면과 요소기술측면에서 파악하여 전이중방식 송수신기를 위한 기본 연구를 통해 효율적인 설계를 위한 접근방법을 제시하고자 한다.