• Journal of Environmental Science International
• /
• v.31 no.4
• /
• pp.365-368
• /
• 2022

The purpose of this study was to investigate the effects of desensitization and flooding on the behavior of dogs during grooming, focusing on their response to the sound and skin stimulation while using a clipper. A total of 20 adult dogs over two years of age with complete personality formation were included in the study. Ten dogs, of which three were Bichons (average weight 5 kg), four were Poodles (average weight 5 kg), and three were Malteses (average weight 4 kg), were subjected to the desensitization process. The remaining 10 adult dogs were subjected to the flooding experiment, and were of the same breed and average weight as the adult dogs used in the desensitization process. The desensitization and the flooding were performed three times a day (approximately 1 min per session) for 10 days. For desensitization, statistical significance was observed only on the fifth day, when compared by breed (p<0.05). Overall, when compared by measurement day, the results of desensitization for Bichon, Poodle and Maltese dogs were statistically significant (p<0.05). The results for the Bichon, Poodle, and Maltese dogs that were subjected to flooding were found to be statistically significant (p<0.05). There was a significant difference in the results of the flooding on the second and ninth days (p<0.05); however, flooding had no effect on the other days (p>0.05). Desensitization using the clipper, a beauty tool, was faster than flooding in achieving stabilization. In conclusion, desensitization and flooding showed positive results on the stress relief and emotions of dogs during grooming, with respect to cosmetic fear response.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8A
• /
• pp.768-776
• /
• 2010

In this paper, we consider a linear precoding for the effective spectrum sharing in multiple-input multiple-output (MIMO) cognitive radio system where a secondary user coexists with primary users. The secondary user employs the orthogonal space time block coding (OSTBC) at the transmitter. Assuming a flat fading channel and a maximum-likelihood receiver, the optimum precoder forces transmission referred to as eigen-beamforming. In this paper, to eliminate the interference, ZF criterion based eigen-beamforming is not only used but also the precoding weight is chosen to cancel the remaining interference. This weight is computed by vector's likelihood. Simulation results show stronger interference suppression capability, better SER performance, and higher capacity than the algorithm in [4].

• Journal of Electrochemical Science and Technology
• /
• v.9 no.2
• /
• pp.141-148
• /
• 2018

This study evaluated the performance characteristics of varied electrolyte species and amounts in a molten carbonate fuel cell (MCFC). Coin-type MCFCs were used at the condition of $650^{\circ}C$ and 1 atm. In order to measure the effects of varied electrolyte species and amounts, electrolytes of $(Li+K)_2CO_3$ and $(Li+Na)_2CO_3$ were selected and the amounts of 1.5 g, 2.0 g, 3.0 g, and 4.0 g were used. Insignificant performance differences were observed in the cell using different electrolytes, but the cell performance was sensitive to the amount of the electrolyte used. The pore-filling ratio (PFR), a ratio of pore filling in the components by the liquid carbonate electrolytes, was used to determine the optimum performance range. Consequently, 77% PFR demonstrated the optimum performance for both electrolytes. Thus, the MCFC had a permissible but narrow optimum performance range. The remaining amounts of electrolyte in the cells were determined using the weight reduction ratio (WRR) method after several hours of cell operation. The WRR used the relationship between the initial loaded amount of electrolyte and weight reduction of components in 10 wt% acetic acid. The relationships were linear and identical between the two electrolyte species.

• Biomolecules & Therapeutics
• /
• v.4 no.1
• /
• pp.59-67
• /
• 1996

A new composite antibiotic, SM-101(sulbactam·metampicillin), was at dose levels of 0, 375, 750 and 1500 mg/kg/day administered intravenously to pregnant Sprague-Dawley rats during the organogenetic period. Two-third of dams per group were subjected to caesarean section on day 20 of pregnancy and the remaining 10 dams per group were allowed to deliver. Effects of test substance on dams, embryonal development of F1 fetuses, as well as growth, behaviour and mating performance of F1 offspring were examined. In dams, two deaths occurred at 375 and 1500 mg/kg, respectively. The decrease in the weight of adrenal glands of the 1500 mg/kg group was observed. The prolongation of pregnancy period was found at 1500 mg/kg. F1 fetuses showed no changes related to the treatment of SM-101. In F1 offspring, the increase in spleen weight was seen at all doses treated. No treatment-related abnormalities were observed in each treated group in terms of development, behaviour and reproductive performance. In F2 fetuses, no drug-induced abnormalities occurred at all doses. The results show that the no-effect dose levels (NOELS) for dams and Fl offspring are under 375 mg/kg/day and NOELs for F1/F2 fetuses are over 1500 mg/kg/day.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.393-396
• /
• 2008

Propellant consumption control for space launch vehicle can be achieved by propellant utilization system (PUS) and tank depletion system (TDS). In the course of developing new space launch vehicles, the main target of design is on reducing of space launch vehicle weight, which results in increasing both specific impulse and payload weight. The weights of space launch vehicles are generally allocated to structure, propulsion system, and propellants loaded. The quantity of propellants filled in propellant tanks may be estimated with the propellants actually consumed by propulsion system to complete its mission and the propellants left on-board at the time of engine shut-off. To minimize the remaining quantity of propellants on-board the supplying propellants' O/F ratio should be controlled from the certain time before engine shutdown. To control an O/F ratio, a control system, which accurately measures and compares the remainder of propellants in tanks and pipes, should be needed. This paper solely dedicates its contents to explore the merits and demerits of various level sensor, which is one of the important elements for PUS and TDS, and the transmission and control of signals within space launch vehicle.

• Textile Coloration and Finishing
• /
• v.18 no.6 s.91
• /
• pp.37-42
• /
• 2006

Researches to preserve and restore the remaining fabrics as costume heritages have been carried out. In this study, in order to artificially restore an excavated silk fabrics, degummed silk fabrics and safflower dyed silk fabrics were prepared for an experiment. These fabrics were photo-degraded by the Xenon arc beam to have various strength retention(100%, 80%, 60%, 40%, 20%). The fine structure and physical properties of Xenon arc treated fabrics were investigated with various techniques such as tensile test, weight loss, wide-angle X-ray diffraction, yellowness, color, SEM etc. Tensile strength and the crystal diffraction intensity of silk fabrics decreased as Xenon arc hem treatment time increased. Weight loss increased slightly. Strength retention was decreased as the Xenon arc beam treatment time goes by. (Yellowness of the undyed silk fabrics and $L^*$ of the dyed silk fabrics increased. Whiteness of the undyed silk fabrics and $b^* of the dyed silk fabrics decreased.) SEM results of the silk fabrics treated Xenon arc beam show that surface was a little damaged.

• Journal of Information Processing Systems
• /
• v.7 no.1
• /
• pp.53-62
• /
• 2011

With the steady growth of mobile technology and applications, demand for more storage in mobile devices has also increased. A lightweight block-level protocol, Internet Advanced Technology Attachment (iATA), has been developed to deliver a cost-effective storage network solution for mobile devices to obtain more storage. This paper seeks to contribute to designing and implementing Load Balancing (LB), Network Monitoring (NM) and Write Replication (WR) modules to improve the protocol's scalability and data availability. LB and NM modules are invoked to collect system resources states and current network status at each associate node (server machine). A dynamic weight factor is calculated based on the collected information and sent to a referral server. The referral server is responsible to analyze and allocate the most ideal node with the least weight to serve the client. With this approach, the client can avoid connecting to a heavily loaded node that may cause delays in subsequent in-band I/O operations. Write replication is applied to the remaining nodes through a WR module by utilizing the Unison file synchronization program. A client initially connected to node IP A for write operations will have no hindrances in executing the relevant read operations at node IP B in new connections. In the worst case scenario of a node crashing, data remain recoverable from other functioning nodes. We have conducted several benchmark tests and our results are evaluated and verified in a later section.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.11
• /
• pp.91-96
• /
• 2014

Since the sensors of Internet of Things (IOT) collect various data, the lifetime of sensor network is very important and the data should be aggregated efficiently. The contiguous collection by the certain sensors occurs an excessive battery consumption and successive transmission of same value of data should be avoided. To solve these things, we propose an weight-based cluster head replacement method that divides whole network into several grids and cluster head is selected by remaining energy, density of alive sensors and location of sensor. The aim of algorithm maximizes the lifetime of network. Our simulation results shows that the proposed method is very simple as well as balances energy consumption.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.10
• /
• pp.1633-1641
• /
• 2020

Objective: The objective of this study was to develop a model for estimating the carcass weight of Hanwoo cattle as a function of body measurements using three different modeling approaches: i) multiple regression analysis, ii) partial least square regression analysis, and iii) a neural network. Methods: Data from a total of 134 Hanwoo cattle were obtained from the National Institute of Animal Science in South Korea. Among the 372 variables in the raw data, 20 variables related to carcass weight and body measurements were extracted to use in multiple regression, partial least square regression, and an artificial neural network to estimate the cold carcass weight of Hanwoo cattle by any of seven body measurements significantly related to carcass weight or by all 19 body measurement variables. For developing and training the model, 100 data points were used, whereas the 34 remaining data points were used to test the model estimation. Results: The R² values from testing the developed models by multiple regression, partial least square regression, and an artificial neural network with seven significant variables were 0.91, 0.91, and 0.92, respectively, whereas all the methods exhibited similar R² values of approximately 0.93 with all 19 body measurement variables. In addition, relative errors were within 4%, suggesting that the developed model was reliable in estimating Hanwoo cattle carcass weight. The neural network exhibited the highest accuracy. Conclusion: The developed model was applicable for estimating Hanwoo cattle carcass weight using body measurements. Because the procedure and required variables could differ according to the type of model, it was necessary to select the best model suitable for the system with which to calculate the model.

• Archives of Pharmacal Research
• /
• v.19 no.4
• /
• pp.326-334
• /
• 1996

We investigated the optimum conditions for conversion of water-insoluble components of basidiocarps of Ganoderma lucidum to water-soluble components by hydrolyzing with chitinase. We also tried it with Ganoderma luciclum residue remaining after extracting hot water-soluble components of Ganoderma lucidum. After hydrolyzing under optimum conditions (20 ppm chitinase, 2% Ganoderma lucidum or 6% Ganoderma lucidum residue, at pH 3 and at $ 35^{\circ}C$), the contents of total water-soluble components (polysaccharide or protein) were measured, and it was found that the contents of water-soluble components increased to 1.5-2.7 fold. Michaelis constant, $K_m$ and maximum rate, $V_max$ calculated by Lineweaver-Burk plot for hydrolysis of Ganoderma lucidum were 1.75% and 0.02%/min respectively and those for hydrolysis of Ganoderma lucidum residue were 53.15% and 0.53%/min respectively The protein-bound polysaccharide was isolated after hydrolysis and molecular weights were measured by Sepharose CL-4B gel filtration and compared with the molecular weights of polysaccharide before hydrolysis.