• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.20 no.3
• /
• pp.160-166
• /
• 2017

Purpose: The prevalence of reflux esophagitis (RE) has increased recently in Korea. Little is known concerning the prevalence and characteristics of RE in pediatric patients. This study investigated the prevalence and influence of risk factors in endoscopically proven RE in Korea in pediatric patients over a period of 14 years. Methods: A retrospective chart review of all patients between the ages of 1 month and 20 years who underwent esophagogastroduodenoscopy at Samsung Medical Center between 2001 and 2014 was carried out. Univariate and multivariate analyses were conducted to identify independent risk factors for RE. Results: The prevalence rate of endoscopically proven RE in this study was 28.7% (978/3,413). The prevalence of RE increased from 11.8% from 2001 to 2007 to 37.7% from 2008 to 2014. Multivariate logistic regression analysis revealed that residency in the Greater Gangnam area (odds ratio [OR], 1.21; 95% confidence interval [CI], 1.02-1.44) and age (OR, 1.13; 95% CI, 1.11-1.15) were significant predictive factors for the presence of RE. Conclusion: The prevalence rate of endoscopically proven pediatric RE has increased over the past 14 years. Residency and older age are more important independent risk factors for pediatric RE in Korea.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.257-257
• /
• 2016

최근에 메모리의 초고속화, 고집적화 및 초절전화가 요구되면서 resistive random access memory (ReRAM), ferroelectric RAM (FeRAM), phase change RAM (PRAM)등과 같은 차세대 메모리 기술이 활발히 연구되고 있다. 다양한 메모리 중에서 특히 resistive random access memory (ReRAM)는 빠른 동작 속도, 낮은 동작 전압, 대용량화와 비휘발성 등의 장점을 가진다. ReRAM 소자는 절연막의 저항 스위칭(resistance switching) 현상을 이용하여 동작하기 때문에 SiOx, AlOx, TaOx, ZrOx, NiOx, TiOx, 그리고 HfOx 등과 같은 금속 산화물에 대한 연구들이 활발하게 이루어지고 있다. 이와 같이 다양한 산화물 중에서 AlOx는 ReRAM의 절연막으로 적용되었을 때, 우수한 저항변화특성과 안정성을 가진다. 하지만, AlOx 박막을 형성하기 위하여 기존에 많이 사용되어지던 PVD (physical vapour deposition) 또는 CVD (chemical vapour deposition) 방법에서는 두께가 균일하고 막질이 우수한 박막을 얻을 수 있지만 고가의 진공장비 사용 및 대면적 공정이 곤란하다는 문제점이 있다. 한편, 용액 공정 방법은 공정과정이 간단하여 경제적이고 대면적화가 가능하며 저온에서 공정이 이루어지는 장점으로 많은 관심을 받고 있다. 본 연구에서는 sputtering 방법과 용액 공정 방법으로 형성한 AlOx 기반의 ReRAM에서 메모리 특성을 비교 및 평가하였다. 먼저, p-type Si 기판 위에 습식산화를 통하여 SiO2 300 nm를 성장시킨 후, electron beam evaporation으로 하부 전극을 형성하기 위하여 Ti와 Pt를 각각 10 nm와 100 nm의 두께로 증착하였다. 이후, 제작된 AlOx 용액을 spin coating 방법으로 1000 rpm 10 초, 6000 rpm 30 초의 조건으로 증착하였다. Solvent 및 불순물 제거를 위하여 $180^{\circ}C$의 온도에서 10 분 동안 열처리를 진행하였고, 상부 전극을 형성하기 위해 shadow mask를 이용하여 각각 50 nm, 100 nm 두께의 Ti와 Al을 electron beam evaporation 방법으로 증착하였다. 측정 결과, 용액 공정 방법으로 형성한 AlOx 기반의 ReRAM에서는 기존의 sputtering 방법으로 제작된 ReRAM에 비해서 저항 분포가 균일하지는 않았지만, 103 cycle 이상의 우수한 endurance 특성을 나타냈다. 또한, 1 V 내외로 동작 전압이 낮았으며 104 초 동안의 retention 측정에서도 메모리 특성이 일정하게 유지되었다. 결론적으로, 간단한 용액 공정 방법은 ReRAM 소자 제작에 많이 이용될 것으로 기대된다.

• KSBB Journal
• /
• v.21 no.5
• /
• pp.371-375
• /
• 2006

Frontal analysis(FA) and Pulsed input method(PIM) have been frequently utilized to measure isotherm of single solute, as well as non-competitive isotherms of two solutes in chromatography(1). FA and PIM were used in this study as complementary methods to measure adsorption isotherms of loxoprofen racemate in HPLC. Prior to FA and PIM experiments, measurements of loxoprofen solubility were made at hexane/ethanol=50/50, 80/20, 95/5(v/v) with acetic acid(0.5%) for adjusting pH. The last composition(95/5) of hexane/ethanol allows us to separate loxoprofen racemate into two forms(retentate, extract). PIM and FA were used to determine the isotherms of re-and ex-loxoprofen.

• Korean Journal of Materials Research
• /
• v.26 no.12
• /
• pp.751-756
• /
• 2016

Graphite was diffusion-bonded by hot-pressing to W-25Re alloy using a Ti interlayer. For the joining, a uniaxial pressure of 25 MPa was applied at $1600^{\circ}C$ for 2 hrs in an argon atmosphere with a heating rate of $10^{\circ}C\;min^{-1}$. The interfacial microstructure and elemental distribution of the W-25Re/Ti/Graphite joints were analyzed by scanning electron microscopy (SEM). Hot-pressed joints appeared to form a stable interlayer without any micro-cracking, pores, or defects. To investigate the high-temperature stability of the W-25Re/Ti/Graphite joint, an oxy-acetylene torch test was conducted for 30 seconds with oxygen and acetylene at a 1.3:1 ratio. Cross-sectional analysis of the joint was performed to compare the thickness of the oxide layer and its chemical composition. The thickness of W-25Re changed from 250 to $20{\mu}m$. In the elemental analysis, a high fraction of rhenium was detected at the surface oxidation layer of W-25Re, while the W-25Re matrix was found to maintain the initial weight ratio. Tungsten was first reacted with oxygen at a torch temperature over $2500^{\circ}C$ to form a tungsten oxide layer on the surface of W-25Re. Then, the remaining rhenium was subsequently reacted with oxygen to form rhenium oxide. The interfacial microstructure of the Ti-containing interlayer was stable after the torch test at a temperature over $2500^{\circ}C$.

• The Journal of the Korea Contents Association
• /
• v.17 no.1
• /
• pp.242-261
• /
• 2017

The purposes of this research are to explore factors that affect re-employment revitalization of the semi-aged workers and to seek practical and specific improvement plans to activate the semi-aged worker's re-employment. For the purposes of this research, face to face interviews were conducted between March 18th and April 10th, 2016 among 375 semi-aged who are currently searching for a job or re-employed among the semi-aged between 50 and 64 years old and reside in Daegu Metropolitan City. According to logistic regression analysis, sex, subjective health condition, working period, and information supply have statistically significant positive impacts on re-employment of the semi-aged workers. On the other hand, simple labor work and seeking job period have statistically significant negative impacts on re-employment of the semi-aged workers. Finally, policy implications for the improvement of re-employment of the semi-aged workers were introduced and discussed.

• Journal of the Korea Concrete Institute
• /
• v.15 no.6
• /
• pp.811-819
• /
• 2003

The corrosion of steel reinforcing bar(re-bar) has been the major cause of the reinforced concrete deterioration. FRP(Fiber-reinforced polymer) reinforcing bar has emerged as one of the most promising and affordable solutions to the corrosion problems of steel reinforcement in structural concrete. However, FRP re-bar is pone to deteriorate due to other degradation mechanisms than those for steel. The high alkalinity of concrete, for instance, is a possible degradation source. Other potentially FRP re-bar aggressive environments are sea water, acid solution and fresh water/moisture. In this study long-term durability performance of FRP re-bar were evaluated. The mechanical and durability properties of two type of CFRP-, GFRP re-bar and one type of AFRP re-bar were investigated; the FRP re-bars were subjected to alkaline solution acid solution, salt solution and deionized water. The mechanical and durability properties were investigated by performing tensile, compressive and short beam tests. Experimental results confirmed the desirable resistance of FRP re-bar to aggressive chemical environment.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.531-536
• /
• 1999

Experiments on micro-leak of water were carried out with the water injecting simulator in liquid sodium atmosphere. The leak path was plugged by the sodium-water reaction products in the 2.25Cr-1Mo steel specimen. However, leak paths re-opened in most cases. The self-wastage patterns were not affected by the sodium temperature in the re-opened specimen. The diameter of the defected area, including the re-opened part, was about 5 min. It took 143, 40.7 and 34.7 minutes to re-open the leak path at 450, 475, and $510^{\circ}C$, respectively. It was concluded that the reopening time decreased with the increasing temperature.

• Journal of Preventive Medicine and Public Health
• /
• v.51 no.2
• /
• pp.71-82
• /
• 2018

Objectives: Areca nut is widely consumed in many parts of the world, especially in South and Southeast Asia, where cardiovascular disease (CVD) is also a huge burden. Among the forms of CVD, acute coronary syndrome (ACS) is a major cause of mortality and morbidity. Research has shown areca nut chewing to be associated with diabetes, hypertension, oropharyngeal and esophageal cancers, and CVD, but little is known about mortality and re-hospitalization secondary to ACS among areca nut users and non-users. Methods: A prospective cohort was studied to quantify the effect of areca nut chewing on patients with newly diagnosed ACS by categorizing the study population into exposed and non-exposed groups according to baseline chewing status. Cox proportional hazards models were used to examine the associations of areca nut chewing with the risk of re-hospitalization and 30-day mortality secondary to ACS. Results: Of the 384 ACS patients, 49.5% (n=190) were areca users. During 1-month of follow-up, 20.3% (n=78) deaths and 25.1% (n=96) re-hospitalizations occurred. A higher risk of re-hospitalization was found (adjusted hazard ratio [aHR], 2.05; 95% confidence interval [CI], 1.29 to 3.27; p=0.002) in areca users than in non-users. Moreover, patients with severe disease were at a significantly higher risk of 30-day mortality (aHR, 2.77; 95% CI, 1.67 to 4.59; p<0.001) and re-hospitalization (aHR, 2.72; 95% CI, 1.73 to 4.26; p<0.001). Conclusions: The 30-day re-hospitalization rate among ACS patients was found to be significantly higher in areca users and individuals with severe disease. These findings suggest that screening for a history of areca nut chewing may help to identify patients at a high risk for re-hospitalization due to secondary events.

• The Journal of Korean Physical Therapy
• /
• v.30 no.5
• /
• pp.181-186
• /
• 2018

Purpose: This study investigated the effects of home-based exercise intensity on the aerobic capacity and 1 year re-hospitalization rate in patients with chronic heart failure (CHF). Methods: Forty seven patients with CHF (males 33, females 14, age $61.3{\pm}9.8years$) participated in this study. The patients were allocated randomly to 3 groups in accordance with home-based exercise intensity: no home based exercise (NHE, 40%, n=19), moderate intensity home-based exercise (MIHE, 43%, n=20), and high intensity home based exercise (HIHE, 17%, n=8). All patients completed the symptom-limited cardiopulmonary exercise (CPX) test safely at the cardiac rehabilitation hospital. Results: The NHE group significantly showed lower peak $VO_2$ and a higher $VE/VCO_2$ slope than the MIHE (p<0.05) and HIHE (p<0.01) groups. On the other hand, the NHE group did not show significant differences in the other hemodynamic responses, such as heart rate (HR) max, HR reserve, maximal systolic blood pressure (SBP), and SBP reserve. Nine out of 19 NHE patients (47%) were re-hospitalized related to heart disease and two out of 20 MIHE (10%) patients were re-hospitalized, but nobody in the HIHE group were re-hospitalized within 1 year from the CPX test. Conclusion: In patients with CHF, home-based self-exercise is one of the important factors for reducing the re-hospitalization rate. In addition, improved aerobic capacity is strongly associated with a lower re-hospitalization rate. In particular, re-hospitalized CHF patients showed significant differences in respiratory parameters and hemodynamic parameters compared to the non-re-hospitalized patients.

• Resources Recycling
• /
• v.3 no.1
• /
• pp.17-24
• /
• 1994

Recovery of precious metal values from petrochemical spent catalyst is important from the viewpoint of environmental protection and resource recycling. Two types of spent catalysts were used in this study. One used in the manufacture of ethylene contains 0.3% Pd in the alumina substrate. The other used in oil refining contains 0.3% Pt and 0.3% Re. Both spent catalysts are roasted to remove volatile matters as carbon and sulfur. Then, metallic Pd powder from Pd spent catalyst is obtained in the course of grinding, hydrochloric acid or aqua regia leaching and cementation with iron. For the recovery of Pt and Re from Pt-Re spent catalyst, Pt and Re are leached with either HCI or aqua regia, first. Metallic Pt powder is recovered from the leach solution by cementation with Fe powder. Re in sulfide form is precipitated by the addition of sodium sulfide to the solution obtained after Pt recovery. It is found that 6N HCI can be successfully used as leaching agent for both types of spent catalyst. 6N HCI is considered to be better than aqua regia in consideration of reagent and equipment cost.