• Journal of Broadcast Engineering
• /
• v.12 no.3
• /
• pp.250-265
• /
• 2007

In this paper, a fast intermode decision scheme is introduced by efficiently performing the mode decision using statistical hypothesis testing for hierarchical B-picture coding of SVC, in which much computational power is expensed for combined variable block sizes and hierarchical B-pictures. The hypothesis testing in the proposed method is performed on $16{\times}16\;and\;8{\times}8$ blocks to have early termination for RD computation of all possible modes. The early termination in intermode decision is performed by comparing the pixel values of current blocks and corresponding motion-compensated blocks. The proposed scheme exhibits effective early termination behavior in intermode decision and leads to a significant reduction up to 69% in computational complexity with slight increment in bit amounts. The degradation of visual quality turns out to be negligible in terms of PSNR values.

• Journal of the Korean Magnetics Society
• /
• v.27 no.2
• /
• pp.63-69
• /
• 2017

Naval ships are particularly required to maintain acoustic and magnetic silence due to their operational characteristics. Among them, underwater magnetic field signals derived by ships are likely to be detected by threats such as surveillance systems and mine systems at close distance. In order to increase the survivability of the vessels, various techniques for reducing the magnetic field signal are being studied and it is necessary to consider not only the magnitude of the magnetic field signal but also the gradient of it. In this paper, we use the commercial electromagnetic finite element analysis tool to predict the induced magnetic field signal of ship's scaled model, and arrange the degaussing coil. And the optimum degaussing current of the coil was derived by applying the particle swarm optimization algorithm considering the gradient constraint. The validity of the optimal degaussing technique is verified analytically by comparing the magnetic field signals after the degaussing with or without gradient constraint.

• Journal of Environmental Science International
• /
• v.25 no.5
• /
• pp.737-744
• /
• 2016

For electrolysis process using an insoluble electrode, electrochemical performance was greatly affected by the manufacturing method and procedure, such as the firing temperature, pre-treatment, type of precursor solution, coating method, electrode material, etc. Components of the electrode therein is one of the most important factors in electrochemical reaction. To achieve such characteristics, a appropriate ratio of the electrode material should be carefully chosen. The aim of this research was to apply experimental design method in the optimization of electrode component for the maximum generation of oxidants in electrochemical oxidation process. Mixture design, especially expanded simplex lattice design, in DOME (design of mixture experiments) with Design Expert - commercial software - was used to analyze the data. Analysis of variance (ANOVA) showed a high coefficient of determination ($R^2$) value of 0.9470, thus ensuring a satisfactory adjustment of the $3^{rd}$ order special cubic regression model with the experimental data. The application of response surface methodology (RSM) yielded the following regression equation, which is an empirical relationship between the TRO generation concentration and independent variables(mol ratio of 3 electrode components) in a real unit: TRO generation concentration $(mg/L)=TRO\;conc.=98.25{\times}[Ir]+49.71{\times}[Sn]+95.29{\times}[Sb]-16.91{\times}[Ir]{\times}[Sn]-29.47{\times}[Ir]{\times}[Sb]-22.65{\times}[Sn]{\times}[Sb]+703.19{\times}[Ir]{\times}[Sn]{\times}[Sb]$. The optimized formulation of the 3 component electrode for an high TRO (total residual oxidants) generation was acquired at mol ratio of Ir 0.406, Sn 0.210, Sb 0.384 (desirability d value, 1).

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.2
• /
• pp.96-108
• /
• 2022

In this paper, we propose a systematic hull form variation technique which automatically satisfies the displacement constraint and guarantees a high level of fairness. This method is possible through multiple parameter correction curves. The present method is to improve the hull form variation method based on parametric modification function and consists of two sub-categories: SAC variation and section lines modification. For SAC variation, the utilization of two B-Spline curves satisfying GC¹ condition led to the satisfaction of displacement constraint and high level of fairness at the same time. Section lines modification methods involves in using two fuctions: the first is the waterplane modification function combining two cubic splines. the other function is the sectional area modification function consisting of 2nd order polynomial over the DLWL(Design Load Waterline) and 3rd order polynomial below the DLWL, This function enables not only the fundamental U-V section shape variation but also systematically modified section lines. The present method is expected to be more useful in the hull form optimization process using CFD compared to the existing method.

• Journal of the East Asian Society of Dietary Life
• /
• v.26 no.1
• /
• pp.88-98
• /
• 2016

The pharmacological effects of ginseng berry have been known to improve psychological function, immune activities, cardiovascular conditions, and certain cancers. It is also known that fermentation improves the bioavailability of human beneficial natural materials. Accordingly, we investigated the optimal fermentation conditions of ginseng berry extract with strain isolated from conventional foods. We also analyzed the fermentation product and its antioxidant activity. The bacterium isolated from fermented kimchi was identified as Lactobacillus sp. strain KYH. To optimize the process, fermentation was performed in a 5 L fermenter containing 3 L of ginseng berry extract at 200 rpm for 72 hr. Under optimized conditions, batch and fed-batch fermentations were performed. After fermentation, organic acids, amino acids, sugars, ginsenosides, and antioxidant activity were evaluated. The optimum fermentation conditions were determined as pH 7.0 and a temperature of $30^{\circ}C$, respectively. After fermentation, the amounts and compositions of organic acids, amino acids, sugars, ginsenosides, and antioxidant activity were altered. In comparing the distribution of ginsenosides with that before fermentation, the ginsenoside Re was a major product. However, amounts of ginsenosides Rb1, Rc, and Rd were reduced, whereas amounts of ginsenosides Rh1 and Rh2 increased. Total phenol content increased to 43.8%, whereas flavonoid content decreased to 19.8%. The DPPH radical scavenging activity and total antioxidant activity increased to 27.2 and 19.4%, respectively.

• Journal of the Korean Society of Radiology
• /
• v.5 no.5
• /
• pp.245-253
• /
• 2011

The hazard level will be increased with the augmentation of the dose received by patients. Therefore, patients radiation dose have been analyzed by this study for the radiology clinics located at Seoul and Gyeongin area from August 2009 to September 2010. In the case of the front and rear directional inspection of skull, patient radiation dose was turned out to be 1.75mGy for radiology clinic, 3.00mGy for UK, 3.00mGy for Japan, and 5.00mGy for Germany, therefore, radiology clinic was the lowest. In the case of lateral directional inspection of skull, patient radiation dose was turned out to be 1.49mGy for radiology clinic, 1.50mGy for 3rd medical institution, therefore, radiology clinic was measured lower, and it was lower than 3.00mGy which is the recommended dose of IAEA. In order to reduce medical exposure of patient, optimization of efficient protection of radiation and reduction of medical radiation exposure are thought to be required by observing recommendation of international organization based on the result of this study.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.3
• /
• pp.44-53
• /
• 2010

The H.264/AVC has been designed to use 9 directional intra prediction modes for removing spatial redundancy. It also employs high correlation between neighbouring block modes in sending mode information. For indication of the mode, smaller bits are assigned for higher probable modes and are compressed by predicting the mode with minimum value between two prediction modes of neighboring two blocks. In this paper, we calculated the statistical probability of prediction modes of the current block to exploit the correlation among the modes of neighboring two blocks with several test video sequences. Then, we made the probable prediction table that lists 5 most probable candidate modes for all possible combinatorial modes of upper and left blocks. By using this probability table, one of 5 higher probable candidate modes is selected based on RD-optimization to reduce computational complexity and determines the most probable mode for each cases for improving compression performance. The compression performance of the proposed algorithm is around 1.1%~1.50%, compared with JM14.2 and we achieved 18.46%~36.03% improvement in decoding speed.

• Investigative Magnetic Resonance Imaging
• /
• v.13 no.2
• /
• pp.117-126
• /
• 2009

Purpose : A numerical method of designing a multiple quantum filter (MQF) is presented for the optimum detection of myo-inositol (mI), an important brain metabolite, by using in vivo proton nuclear magnetic resonance spectroscopy ($^1$-HMRS). Materials and Methods : Starting from the characterization of the metabolite, the filter design includes the optimization of the sequence parameters such as the two echo times (TEs), the mixing time (TM), and the flip angle and offset frequency of the 3rd $90^{\circ}$ pulse which converts multiple quantum coherences (MQCs) back into single quantum coherences (SQCs). The optimized filter was then tested both in phantom and in human brains. Results : The results demonstrate that the proposed MQF can improve the signal-to-background ratio of the target metabolite by a factor of more than three by effectively suppressing the signal from the background metabolites. Conclusion : By incorporating a numerical method into the design of MQFs in $^1$-HMRS the spectral integrity of a target metabolite, in particular, with a complicated spin system can be substantially enhanced.

• Korean Journal of Environment and Ecology
• /
• v.35 no.2
• /
• pp.193-203
• /
• 2021

As endangered species are gradually increasing due to land development by humans, it is essential to secure sufficient protected areas (PAs) proactively. Therefore, this study checked priority conservation areas to select candidate PAs when considering the impact of land development. We determined the conservation priorities by analyzing four scenarios based on existing conservation areas and reflecting the development impact using MARXAN, the decision-making support software for the conservation plan. The development impact was derived using the developed area ratio, population density, road network system, and traffic volume. The conservation areas of endangered species were derived using the data of the appearance points of birds, mammals, and herptiles from the 3rd National Ecosystem Survey. These two factors were used as input data to map conservation priority areas with the machine learning-based optimization methodology. The result identified many non-PAs areas that were expected to play an important role conserving endangered species. When considering the land development impact, it was found that the areas with priority for conservation were fragmented. Even when both the development impact and existing PAs were considered, the priority was higher in areas from the current PAs because many road developments had already been completed around the current PAs. Therefore, it is necessary to consider areas other than the current PAs to protect endangered species and seek alternative measures to fragmented conservation priority areas.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.587-594
• /
• 2023

In this paper, we present the design and optimization process of an on-body microstrip patch antenna with a paired T-type defect for monitoring fracture recovery of human legs. This antenna is designed to be light, thin and compact despite the improvement of return loss and bandwidth performance by adjusting the size of the T-type defect. The structure around the applied human leg is structured as a 5-layer dielectric plane, and the complex dielectric constant of each layer is calculated using the 4-pole Cole-Cole model parameters. In a normal case without bone fracture, the return loss of the on-body antenna is -66.71dB at 4.0196GHz, and the return loss difference ΔS₁₁ is 37.95dB when the gallus layer have a length of 10.0mm, width of 1.0mme, and height of 2.0mm. A 3'rd degree polynomial is presented to predict the height of the gallus layer for the change in return loss, and the polynomial has a very high prediction suitability as RSS = 1.4751, R² = 0.9988246, P-value = 0.0001841.