• Animal Bioscience
• /
• v.35 no.12
• /
• pp.1957-1966
• /
• 2022

Objective: This study aimed to evaluate the difference in the thigh meat quality of Ross 308 broiler from conventional and welfare farms. Methods: Thigh meat samples of Ross 308 broilers (age, 35 d; carcass weight, 1.1 kg) from conventional farm (RCF, n = 60) and animal welfare farms (RAWF, n = 60) were analyzed. Proximate composition, pH, color (lightness, redness, and yellowness), water-holding capacity (WHC), shear force, total aerobic bacteria (TAB), and volatile basic nitrogen (VBN) were measured and the levels of bioactive compounds such as dipeptides (anserine and carnosine), creatine, creatinine, and their anti-oxidation activity were determined. Results: The RCF and RAWF did not differ significantly in their proximate composition, WHC, color, and creatine and carnosine levels. The pH value was significantly lower in RAWF than in RCF on day 7. The shear force value was significantly higher in RAWF than in RCF throughout the storage duration. TAB in RCF on day 9 were significantly higher than those in RAWF. The VBN content of RAWF was significantly lower than that of RCF after 5 days of storage. Creatinine content was significantly higher in RAWF (3.50 mg/100 g) than in RCF (3.08 mg/100 g) on day 1. Along with higher carnosine and anserine contents of RAWF, it had significantly higher 2,2-diphenyl-1-picrylhydrazyl and 2,2-azinobis (3-ethylbenzothiazoline-6-sulfonic acid) radical scavenging activities than those of RCF. Conclusion: These results imply that the animal welfare farming system beneficially affects the overall oxidative stability of Ross 308 thigh meat.

• KIEE International Transactions on Power Engineering
• /
• v.4A no.2
• /
• pp.79-83
• /
• 2004

A new small signal stability analysis method for eigenvalue analysis is presented. This method utilizes the Resistive Companion Form (RCF) for the computation of the transition matrix over a specified time interval, which corresponds to a single cycle operation of the system. This method is applicable to any system, with or without switching element. An illustrative example of the method is presented and the eigenvalues are compared with those of the conventional state space method (analog) in order to demonstrate the accuracy of the proposed eigenvalue analysis method. Also, the variations of oscillation modes that are caused by the switching operation can be precisely analyzed using this method.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.49-52
• /
• 2005

This study was performed to evaluate antibacterial performance antibiotics(RCF-95, Antibio-C) which could control biochemical corrosion of concrete used sewage facilities by sulfate oxidizing bacteria. As antibacterial methods, Broth MIC testing was used for investigating controlled growth effect of sulfate oxidizing bacteria. Also, color-changed testing by indicator was used for confirming between $H_{2}SO_{4}$ diffusion rate by bacteria and antibiotics. It confirmed that Antibio-C was superior to RCF-95 in the antibacterial performance and hence anticipated that this developed Antibio-C was enough to replace imported antibiotics from Japan.

• Land and Housing Review
• /
• v.1 no.1
• /
• pp.43-50
• /
• 2010

In this study, the influences of steel dampers on the behavior of RC frames were investigated using the experimental approach to suggest the installation methods of steel dampers using K-barces. The performances of RC frames with dampers can be evaluated by superposition the load-displacement curves of RC frames and steel dampers with regard to the influences of K-braces. Three specimens are tested to investigate the cyclic behavior of RC frames with dampers. The performances of RC frames with dampers with respect to strength, rigidity, and hysteretic performance are examined. It was found that test results demonstrates the effect of seismic retrofit on RC frames with steel dampers(D-RCF-KBSF, D-RCF-KBSP) compared with RC frames(N-RCF). An approximate design curves may not be good agreement with those of the tests, it is conservative enough so that you can design of RC frames with steel damper with regard to the influences of K-braces.

• Safety and Health at Work
• /
• v.13 no.3
• /
• pp.357-363
• /
• 2022

Background: Refractory ceramic fibers (RCFs) are a suspected carcinogen but have been widely used as insulations. Depending on the temperature, RCFs can transform into crystalline SiO₂, which is a carcinogen that can be present in the air during bulk RCF handling. This study analyzed the physicochemical and morphological characteristics of RCFs at high temperatures and determined the exposure levels during the semiconductor scrubber maintenance. Methods: Sampling was conducted at a company that manufactures semiconductor scrubbers using RCFs as insulation. Bulk RCF samples were collected both before and after exposure to a scrubber temperature of 700℃. Airborne RCFs were collected during scrubber maintenance, and their characteristics were analyzed using microscopes. Results: The components of bulk RCFs were SiO₂ and Al₂O₃, having an amorphous structure. Airborne RCFs were morphologically different from bulk RCFs in size, which could negatively affect maintenance workers' health. 58% of airborne RCFs correspond to the size of thoracic and respirable fibers. RCFs did not crystallize at high temperatures. The exposure caused by airborne RCFs during the scrubber frame assembly and insulation replacement was higher than the occupational exposure limit. Conclusion: Workers conducting insulation replacement are likely exposed to airborne RCFs above safe exposure limits. As RCFs are suspected carcinogens, this exposure should be minimized through prevention and precautionary procedures.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.1
• /
• pp.85-93
• /
• 2011

The structural components of microorganism are quite related to the toxin and environmental conditions. The vegetative and dormant cells are quite affected by the physical and chemical environments to survive and they will be dormant when they are in the extreme environment. The mechanism to activate the microorganisms however, is not well defined yet in the area of activation state and sporulation state through the analysis of EPS. Other than that even the main mechanism of prior to acquisition of analysis values is not well understood. Therefore, what kind of specific environment to affect the activation and sporulation will be discussed through the analysis of the extracellular polymeric substances(EPS). EPS are a high molecular weight mixture of polymers presenting both outside of cells and interior of microbial aggregates. They are a major complex materials in microbial aggregation for sustaining them together in a three dimensional matrix. Three commonly used extraction methods were applied to this study their effectiveness and quantification in extracting EPS from several Bacillus microorganisms and activated sludge. Three extraction methods used for this study are regular centrifugation with formaldehyde (RCF), Steaming, and EDTA extraction. The results of EPS contents such as the quantitative proteins, carbohydrates and the ratio of protein versus carbohydrate from the several species with the several specific methods showed in this research. This study aims to get comparable results of the quantitative production of EPS and the effectiveness of sedimentation for Bacillus microorganisms and activated sludge from several wastewater treatment plans. The results revealed that the protein amount extracted was the highest by the Steaming method of three extraction methods before sporulation and the carbohydrate amount extracted was the highest by the RCA method of three extraction methods after sporulation. The higher amount of protein compared with carbohydrate from Bacillus microorganisms affected higher sedimentation efficiency, however it could not be found the relation between the EPS production and sedimentation efficiency for the activated sludge.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.3
• /
• pp.203-210
• /
• 2021

BACKGROUND: Pesticides can persist in soil due to multiannual uses. To decrease the concerns for potential carry-over of such residues from treated soil during preceding crop cultivation to non-target crops grown in rotation, an uptake study of procymidone was conducted under the actual cultivation conditions in Korea. METHODS AND RESULTS: Procymidone was sprayed twice by foliar application with recommended and double dose according to the safe use guidelines for Korean cabbage up to 14 days before harvest. Arable land was kept fallow for 4 days after harvesting Korean cabbage, and spinach was cultivated as a succeeding crop. Initial residues in soil were 5.670-14.175 mg/kg that were degraded to 3.098-4.555 mg/kg until harvest of Korean cabbage, and then persisted at 1.026-1.300 mg/kg by spinach harvest. Procymidone residues in edible part of succeeding crops from soil uptake were in range of 0.020-0.048 mg/kg for recommended dose and 0.055-0.116 mg/kg for double dose. Root concentration factor (RCF) values of procymidone at different concentration ranged from 0.053 to 0.123, and translocation factor (TF) ranged from 0.176 to 0.768 for spinach. The value of TF was higher than RCF, indicating that the capability of translocation to shoot was relatively higher than that of root uptake and accumulation. CONCLUSION: Procymidone applied on Korean cabbage can be carried-over to spinach and detected at a level similar to MRL (0.05^T mg/kg). Therefore, this study suggests a follow-up study for establishment of plant back interval (PBI) of succeeding crops reflecting the actual agricultural conditions as this study.