• New & Renewable Energy
• /
• v.16 no.4
• /
• pp.1-8
• /
• 2020

The possibility of conversion to the RC-MAT propulsion system (gasoline engine → electric motor) was studied. However, as commercial battery capacities are low. it is not possible to change the propulsion system. Nevertheless, development of nex-generation batteries is necessary for high capacity and high energy density. Although Li/S batteries are theoretically suitable as new generation batteries, these batteries are not composed of only Li and S. Hence, ensuring high energy density can be difficult. Moreover, electrolytes are important components in the study of energy density; hence, the battery by Li2S8 Molarity was sorted. There are no studied on its various electrode components. In this study, a Li/S battery was fabricated using an assorted 3D sulfur electrode of high energy density and its electrochemical properties were studied. The Li/S battery has a high energy density of 468 Wh/kg at 1.28 M Li2S8 (A805-1.28). Its capacity rapidly decreased after 1 cycle with more than 1 M Li2S8.

• Computers and Concrete
• /
• v.11 no.2
• /
• pp.105-121
• /
• 2013

This paper investigates the parameters that control the design of Fiber Reinforced Polymer (FRP) reinforced concrete flexural members proportioned following the ACI 440.1R-06. It investigates the critical parameters that control the flexural design, such as the deflection limits, crack limits, flexural capacity, concrete compressive strength, beam span and cross section, and bar diameter, at various Mean-Ambient Temperatures (MAT). The results of this research suggest that the deflection and cracking requirements are the two most controlling limits for FRP reinforced concrete flexural members.

• Journal of KIBIM
• /
• v.11 no.1
• /
• pp.21-30
• /
• 2021

Reinforcing bars, a major component of the pre-fab structure, adheres to the existing on-site assembly method and attempts to develop and commercialize the technology of the pre-assembly method, but the effect is insignificant. Welded Wire / Bar Mat (WBM) has various advantages such as commercialization of rebar through machine manufacturing to improve workability, but it is different from the existing design and the construction method is different from the previous one. Therefore, to maximize the advantages of WBM and improve productivity, manufacturing, transportation, and construction from the design stage should be considered based on BIM from the initial design stage. In this paper, the concept of the design support system for the WBM was established based on the use of BIM in concrete reinforcement and the preliminary research on the WBM. WBM conversion design was performed for the existing prefabricated members, and based on this, the exchange format and system of the master prefabricated model with the WBM design data were set up. As a result of the pilot test, it was found that the traditional reinforcing bar information extracted from the master prefab model has transmitted 100% accurately. As for the WBM information, 100% of the information on the straight reinforcement was transmitted and represented, and the information on the bent reinforcement was found to have a 90% recall in the master BIM tool.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.47-52
• /
• 2000

F.R.P specimens were made by mixture CM(chopped mat) 450-104 matrix & RC(roving clothes)570-100 Roving, the mixture ratio Resin: hardener (92:8) for tensile test. It was also made of plates by hand lay-up method and was been cured for 24 hours and then was cut tensile specimens in accordance with ASTM D638 Type 3. Knowing exact behavior of bonded area's stress and strain when the tensile test was going on, the test specimens were made of 2 plies laminae of F.R.P in each for supporting cut part in middle of specimen length. And in middle part also were covered of F.R.P plies of 1/2, 2/3 length of specimen in each as well. Also we consider shear stress in adhered area. This study reveals that as plys length is more longer, rupture stress grows remarkably larger.

• Journal of the Korean Society for information Management
• /
• v.5 no.1
• /
• pp.31-52
• /
• 1988

The information policy in Japan have bccir growing rapldlr 111 recent vttars. \'arioi~s level of govc~riimerital organrzatlons, ir~bt~tution arid agrircics have undt~rtak~~rr iriforrnatiori polrcy 111 order to i r l - crease information flow toward tlie society in Japan. At tlie same trme, computerized library systems also h a w uridergoirc rapid expansion. NACSIS(National Ceriter for- Science Informat~on System) wl~icl~ was cstablisl~ed bv Mirristr> of Etlr~c~arion, Sc~ence arid Culture haw witnessed dramatic adv;rnces i r i promoting for corrstructiori of database so as to provide their 11rf'3r.mat1orr nu nationwide scale. T l r i h articlr inrroduccs tlie actr\rtle> and ~mplcmeritat~o~~ of it format in^^ pol~cy wl~i(~li taktas a place hy goverrirnrlit of Japar~ aid arraly~c,.; thi~ ~ I . O I . P S I of deciiioii maltiiig iri polit~cal procedures. So far as b:ast-A\~ari riatioris art, ~ . n r i v t ~ r ~ ~ , e.;pc,ciall\. Kr,rc.an a~rd Japair !rave ,imilar cultural and liistorical backjir. ourii1, ard could t)t. tliif most a p p r o p r i a t ~ ~ caac stlldh for political ~nq~lerncritat~orr. Thus the topic of this artrclc will be useful to r t ~ a l l ~ t . Ore, trail ur~d c r r o r prorex, iri iiiior.matior~ pnlic\ulcorner.