• 한국구조물진단유지관리공학회 논문집
• /
• 제9권2호
• /
• pp.121-128
• /
• 2005

본 연구의 목적은 염화물의 침투로 인한 RC 교량 바닥판의 신뢰성지수를 계산하고 철근부식으로 인한 교량 덱의 상태등급과 신뢰성지수와의 관계를 연구하는 것이다. 이런 목적을 위해 먼저 휨강도와 관련한 파괴확률을 열화(제설염에 의한 장기간의 구조물 손상 및 구조물 안전성 저하)와 관련하여 계산하였으며 구조물 면에 포함된 염화물의 농도, 피복두께 및 철근의 초기부식시간 그리고 염화물 확산으로 인한 철근의 균열시간 등을 MCS기법을 이용하여 찾아내었다.

• Computers and Concrete
• /
• 제23권5호
• /
• pp.329-334
• /
• 2019

Traffic flow capacity of some old road bridges is insufficient due to limited deck width. In such cases bridge deck widening is a common solution. For multi-girder reinforced concrete (RC) bridges it is possible to add steel-concrete composite girders as the new outermost girders. The deck widening may be combined with bridge strengthening thanks to thickening of the existing deck slab. Joint action of the existing and the added parts of such bridge span must be ensured. It refers especially to the horizontal plane at the interface of the existing slab and the added concrete layer as well as to the vertical planes at the external surfaces of the initially outermost girders where the added girders are connected to the existing bridge span. Since the distribution of the added concrete is non-uniform in the span cross-section the structure is particularly sensitive to the added concrete shrinkage. The shrinkage induces shear forces in the aforementioned planes. Widening of a 12 m long RC multi-girder bridge span is numerically analysed to assess the influence of the added concrete shrinkage. The analysis results show that: a) in the vertical plane of the connection of the added and the existing deck slab the longitudinal shear due to the shrinkage of the added concrete is comparable with the effect of live load, b) it is necessary to provide appropriate longitudinal reinforcement in the deck slab over the added girders due to tension induced by the shrinkage of the added concrete.

• 콘크리트학회논문집
• /
• 제29권4호
• /
• pp.371-378
• /
• 2017

본 연구에서는 철근콘크리트 아치 데크의 정적재하실험을 통해 휨 거동을 평가하였다. 휨 실험은 길이 2.5 m, 폭 1.2 m, 중심단면 두께 100 mm, 단부단면 두께 160 mm의 실제 크기 프리캐스트 철근콘크리트 아치 데크의 정적재하 실험을 실시하였다. 실험결과는 극한설계강도에 비하여 약 1.74배 높은 하중을 견디는 것으로 관찰되었다. 반면, 실험체에는 구간에 따라 각각 다른 거동이 관찰되었다. 이러한 거동은 아치 데크와 이를 지지하는 반력대 사이에 일체거동이 이뤄지지 않은 이유로 인한 것으로 판단되었다. 그러므로 추후 연구에서는 반력대를 제외한 아치 데크의 정적재하 실험을 통해 정밀한 거동을 확인해야 할 것으로 사료된다. 실험결과를 종합하여 보면, 철근콘크리트 아치 데크는 일반형태의 바닥판에 비하여 우수한 구조적 이점을 통해 설계기준보다 높은 구조성능을 나타내었다. 이를 통해, 향후에는 장지간 바닥판으로써의 활용이 가능할 것으로 사료된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.637-640
• /
• 2002

The deterioration of RC deck slabs has been a serious problem and high portion of budget has been a spent for repair and strengthening of deck slab. The concrete deck slabs are subject to direct application of vehicle loading and accumulation of fatigue damage. Besides, various environmental causes. In this paper, an probabilistic study is carried out to predict exact load effects and structural capacity of deck slab during its service life, and estimate an appropriate remaining life of deck slab. To achieve this purpose the live load model is developed using by influence line including deterioration of deck slab, and deterioration model of bridge deck slab is developed. In addition, the fatigue life of reinforced concrete deck slabs considering corrosion of reinforcement are estimated based on experimental formula. This study will help rational decisions for the management and repair of reinforced concrete deck slabs.

• Structural Engineering and Mechanics
• /
• 제75권1호
• /
• pp.19-32
• /
• 2020

Due to repetitive traffic loadings and environmental attacks, reinforced concrete (RC) bridge deck slabs are suffering from severe degradation, which makes structural repairing an urgency. In this study, the fatigue performance of an RC bridge deck repairing technique using ultra-high performance fiber reinforcement concrete (UHPFRC) overlay is assessed experimentally with a wheel-type loading set-up as well as analytically based on finite element method (FEM) using a crack bridging degradation concept. In both approaches, an original RC slab is firstly preloaded to achieve a partly damaged RC slab which is then repaired with UHPFRC overlay and reloaded. The results indicate that the developed analytical method can predict the experimental fatigue behaviors including displacement evolutions and crack patterns reasonably well. In addition, as the shear stress in the concrete/UHPFRC interface stays relatively low over the calculations, this interface can be simply simulated as perfect. Moreover, superior to the experiments, the numerical method provides fatigue behaviors of not only the repaired but also the unrepaired RC slabs. Due to the high strengths and cracking resistance of UHPFRC, the repaired slab exhibited a decelerated deterioration rate and an extended fatigue life compared with the unrepaired slab. Therefore, the proposed repairing scheme can afford significant strengthen effects and act as a reference for future practices and engineering applications.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.791-796
• /
• 2000

Purpose of this study is to analyze the characteristics and reinforcement effects of restored the RC bridge deck with small precast panel through static load tests and to provide the basic information for the damaged slab decks. In the tests for realizing movement of general RC bridge slabs, 6 samples are prepared and tested. All reinforced samples are restored with 1 or 2-layers precast panels by epoxy mortar. The movement of restored slabs is analyzed and compared with the behavior of non-restored slabs. In result of these tests, tension cracks due to bending moment are show, and after static load test there happens finally a punching shear failure, which is the general type of RC bridge failure. The tests show that restoration of the RC slab results in increasing of loading capacity about 30~50% an restoring panels are stick to slab and moving with slab under loading test.

• 한국안전학회지
• /
• 제29권3호
• /
• pp.72-78
• /
• 2014

The minimum thickness of long-span deck slab is proposed by checking the limit state according to the Korean highway bridge design code(limit state design). Both minimizing thickness and ensuring safety of deck slab are important design factors to increase a competitive price of the long span deck slabs. The required thicknesses for satisfying flexural capacity, preventing punching shear failure and limiting deflection were calculated by considering KL-510 load model which has increased total load compared to DB 24 from 432 kN to 510 kN. The results of the required thickness for various limit states were compared to propose the minimum thickness as a function of span length of deck slabs. The proposed minimum thickness is influenced by satisfying flexural capacity and limiting deflection. It turns out to be similar compared to the results of the previous study by ultimate strength design method even if the live load model was increased in total weights.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권6호
• /
• pp.93-101
• /
• 2022

국내 RC 슬래브교의 경우 공용연수가 20년 이상인 교량이 전체의 70% 이상을 차지하며, 노후화된 구조물의 수가 증가함에 따라 구조물의 안전 진단 및 유지관리의 중요성이 증가하는 실정이다. 고속도로 교량의 경우 바닥판 균열은 열화현상의 우선적인 원인이 되며, 교량 내구성 및 사용수명 저하에 밀접한 관계가 있다. 또한 신축이음과 교량받침 등의 부재 손상으로 인한 손상 발생 비율이 약 73%로 주부재보다 높다. 따라서 본 연구에서 교량 부재 손상과 바닥판 열화가 결합된 손상 시나리오를 정의하였다. 설계하중으로는 일교차를 고려한 온도 증감과 차랑햐중을 고려하여 개별 단일 손상 및 이종손상 시나리오 발생 시 바닥판 응력 분포와 최대 응력 발생 지점을 비교 분석하였다. 또한 바닥판 열화의 주요한 원인이 되는 균열의 점검 및 진단이력데이터 기반으로 공용연수 별 손상 시나리오에 대한 손상확산 분석 및 상태등급 예측을 수행하였다. 교량부재 손상이 동반되어 발생하는 이종손상의 경우 단일손상 대비 균열 면적율과 손상확산율이 증가되며, 상태등급 C에 도달하는 시기도 매우 빠를 것으로 예측된다. 따라서 교량부재 손상이 발생하였을 때, 신속한 보수 및 교체가 이루어지지 않으면 바닥판의 손상 발생과 손상 확산으로 인한 2차 피해를 유발하는 원인이 될 수 있다. 따라서 바닥판 응답에 대한 지속적인 관찰과 대응이 필요할 것으로 판단된다.

• 한국안전학회지
• /
• 제33권4호
• /
• pp.38-45
• /
• 2018

Bridges are structures where safety must be ensured. Generally, the destruction mechanism of bridge deck shows punching shear. Lately, the high-strength concrete is often used to increase the lifespan of bridges. The benefits of using the high-strength concrete are that it increases the durability and strength. On the contrary, it reduces the cross-section of the bridges. This study suggested the optimal thickness of bridge deck with application of high-strength concrete and the study evaluated its structural performance experimentally. The evaluation result shows that 180 mm and 190 mm of thickness are optimal for 100 MPa and 120 MPa high-strength concrete bridge deck respectively.

• 한국안전학회지
• /
• 제29권5호
• /
• pp.97-103
• /
• 2014

To ensure durability and light weight of bridges, high-strength concrete is required for long-span deck slabs. Such a technology eventually extends the life of bridges and improves the economic efficiency. The results of this study suggests a formula for calculating the minimum thickness of long-span deck slabs built with high strength concrete. The minimum thickness is proposed based on the limit states indicated in the CEB-FIP Model Code and the Korean Highway Bridge Design Code(limit state design). The design compressive strength of concrete used for the study is 80MPa. Moreover, the required thickness for satisfying the flexural capacity and limiting deflection is estimated considering the limit state load combination. The formula for minimum thickness of deck slabs is proposed considering the ultimate limit state(ULS) and the serviceability limit state(SLS) of bridges, and by comparing the Korean Highway Bridge Design Code and similar previous studies. According to the research finding, the minimum thickness of long-span deck slab is more influenced by deflection limit than flexural capacity.