• Korean Journal of Remote Sensing
• /
• 제22권5호
• /
• pp.439-443
• /
• 2006

Image co-registration is the process of overlaying two images of the same scene. One of which is a reference image, while the other (sensed image) is geometrically transformed to the one. Numerous methods were developed for the automated image co-registration and it is known as a timeconsuming and/or computation-intensive procedure. In order to improve efficiency and effectiveness of the co-registration of satellite imagery, this paper proposes a pre-qualified area matching, which is composed of feature extraction with Laplacian filter and area matching algorithm using correlation coefficient. Moreover, to improve the accuracy of co-registration, the outliers in the initial matching point should be removed. For this, two outlier detection techniques of studentized residual and modified RANSAC algorithm are used in this study. Three pairs of Landsat images were used for performance test, and the results were compared and evaluated in terms of robustness and efficiency.

• Korean Journal of Remote Sensing
• /
• 제30권6호
• /
• pp.787-795
• /
• 2014

This paper presents an image registration using Triangulation-based Local Transformation (TLT) applied to the remaining matched points after elimination of the matched points with gross error. The corners extracted using geometric mean-based corner detector are matched using Pearson's correlation coefficient and then accepted as initial matched points only when they satisfy the Left-Right Consistency (LRC) check. We finally accept the remaining matched points whose RANdom SAmple Consensus (RANSAC)-based global transformation (RGT) errors are smaller than a predefined outlier threshold. After Delaunay triangulated irregular networks (TINs) are created using the final matched points on reference and sensed images, respectively, affine transformation is applied to every corresponding triangle and then all the inner pixels of the triangles on the sensed image are transformed to the reference image coordinate. The proposed algorithm was tested using KOMPSAT-2 images and the results showed higher image registration accuracy than the RANSAC-based global transformation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제31권4호
• /
• pp.331-339
• /
• 2013

LiDAR has been one of the widely used and important technologies for 3D modeling of ground surface and objects because of its ability to provide dense and accurate range measurement. The objective of this research is to develop a method for automatic detection and modeling of railroad power lines using high density LiDAR data and RANSAC algorithms. For detecting railroad power lines, multi-echoes properties of laser data and shape knowledge of railroad power lines were employed. Cuboid analysis for detecting seed line segments, tracking lines, connecting and labeling are the main processes. For modeling railroad power lines, iterative RANSAC and least square adjustment were carried out to estimate the lines parameters. The validation of the result is very challenging due to the difficulties in determining the actual references on the ground surface. Standard deviations of 8cm and 5cm for x-y and z coordinates, respectively are satisfactory outcomes. In case of completeness, the result of visual inspection shows that all the lines are detected and modeled well as compare with the original point clouds. The overall processes are fully automated and the methods manage any state of railroad wires efficiently.

• Journal of Advanced Navigation Technology
• /
• 제22권1호
• /
• pp.20-26
• /
• 2018

In this paper, we propose a moving object detection and tracking algorithm based on multi-frame feature point tracking information to reduce false positives. However, there are problems of detection error and tracking speed in existing studies. In order to compensate for this, we first calculate the corner feature points and the optical flow of multiple frames for camera movement compensation and object tracking. Next, the tracking error of the optical flow is reduced by the multi-frame forward-backward tracking, and the traced feature points are divided into the background and the moving object candidate based on homography and RANSAC algorithm for camera movement compensation. Among the transformed corner feature points, the outlier points removed by the RANSAC are clustered and the outlier cluster of a certain size is classified as the moving object candidate. Objects classified as moving object candidates are tracked according to label tracking based data association analysis. In this paper, we prove that the proposed algorithm improves both precision and recall compared with existing algorithms by using quadrotor image - based detection and tracking performance experiments.

• Journal of Korean Society for Geospatial Information Science
• /
• 제22권4호
• /
• pp.3-11
• /
• 2014

Recently, rapid urbanization has necessitated continuous updates in digital map to provide the latest and accurate information for users. However, conventional aerial photogrammetry has some restrictions on periodic updates of small areas due to high cost, and as-built drawing also brings some problems with maintaining quality. Alternatively, this paper proposes a scheme for efficient and accurate update of digital map using point cloud data acquired by Terrestrial Laser Scanner (TLS). Initially, from the whole point cloud data, the building sides are extracted and projected onto a 2D image to trace out the 2D building footprints. In order to register the footprint extractions on the digital map, 2D Affine model is used. For Affine parameter estimation, the centroids of each footprint groups are randomly chosen and matched by means of a modified RANSAC algorithm. Based on proposed algorithm, the experimental results showed that it is possible to renew digital map using building footprint extracted from TLS data.

• Journal of Korea Society of Industrial Information Systems
• /
• 제19권4호
• /
• pp.41-52
• /
• 2014

In this paper, O-ring size measurement algorithm based on a small machine vision inspection equipment which can replace a expensive and large machine vision inspection equipment is presented. The small machine vision inspection equipment acquires a image from a CCD camera shooting a measurement plane which located on a back light and the proposed size measurement algorithm is apply to the image. For improvement of size measurement accuracy, camera lens distortion correction and perspective distortion correction are conducted by software technique. Consider O-ring's shape, ellipse fitting model is applied. In order to increase the reliability of ellipse fitting, RANSAC algorithm is applied.

• Journal of the Institute of Electronics and Information Engineers
• /
• 제50권5호
• /
• pp.224-230
• /
• 2013

Lane boundary detection plays a key role in the driver assistance system. This study proposes a robust method for detecting lane boundary in severe environment. First, a horizontal line detects form the original image using improved Vertical Mean Distribution Method (iVMD) and the sub-region image which is under the horizontal line, is determined. Second, we extract the lane marking from the sub-region image using Canny edge detector. Finally, K-means clustering algorithm classifi left and right lane cluster under variant illumination, cracked road, complex lane marking and passing traffic. Experimental results show that the proposed method satisfie the real-time and efficient requirement of the intelligent transportation system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국정보통신학회 2016년도 춘계학술대회
• /
• pp.815-818
• /
• 2016

Forward collision warning systems(FCWS) and lane departure warning systems(LDWS) need regions of interest for detecting lanes and objects as road regions. In general, the lane departure warning system using a vehicle front camera is tracking a lane curve using RANSAC or the like in the form of a straight line obtained image are compared with the center of the vehicle. This algorithm has weaknesses that requires a wide range of the lane being vulnerable to the curve. This paper presents an algorithm that checks whether the current lane departure by car from the Top-view space. The algorithm also can check whether the vehicle in the lane departure of the narrow range, and shows the result that is almost not affected by noise.

• Journal of Institute of Control, Robotics and Systems
• /
• 제22권2호
• /
• pp.110-116
• /
• 2016

Autonomous vehicles must obey the traffic laws in order to drive actual roads. Traffic signs erected at the side of roads explain the road traffic information or regulations. Therefore, traffic sign recognition is necessary for the autonomous vehicles. In this paper, color characteristics are first considered to detect traffic sign candidates. Subsequently, we establish HOG (Histogram of Oriented Gradients) features from the detected candidate and recognize the traffic sign through a SVM (Support Vector Machine). However, owing to various circumstances, such as changes in weather and lighting, it is difficult to recognize the traffic signs robustly using only SVM. In order to solve this problem, we propose a tracking algorithm with RANSAC-based motion estimation. Using two-point motion estimation, inlier feature points within the traffic sign are selected and then the optimal motion is calculated with the inliers through a bundle adjustment. This approach greatly enhances the traffic sign recognition performance.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제25권6_1호
• /
• pp.529-536
• /
• 2007

Registration between image and object space is a fundamental step in photogrammetry and computer vision. Along with rapid development of sensors - multi/hyper spectral sensor, laser scanning sensor, radar sensor etc., the needs for registration between different sensors are ever increasing. There are two important considerations on different sensor registration. They are sensor invariant feature extraction and correspondence between them. Since point to point correspondence does not exist in image and laser scanning data, it is necessary to have higher entities for extraction and correspondence. This leads to modify first, existing mathematical and geometrical model which was suitable for point measurement to line measurements, second, matching scheme. In this research, linear feature is selected for sensor invariant features and matching entity. Linear features are incorporated into mathematical equation in the form of extended collinearity equation for registration problem known as photo resection which calculates exterior orientation parameters. The other emphasis is on the scheme of finding matched entities in the aide of RANSAC (RANdom SAmple Consensus) in the absence of correspondences. To relieve computational load which is a common problem in sampling theorem, deterministic sampling technique and selecting 4 line features from 4 sectors are applied.