• 한국음향학회지
• /
• 제42권3호
• /
• pp.250-261
• /
• 2023

본 연구에서는 펌프젯 추진기를 대상으로 공동, 비공동 조건에서의 유동 소음원을 규명하기 위하여 추진기의 각 구성품인 덕트와 스테이터, 로터에 의한 소음 기여도를 평가하였으며, 공동과 비공동 조건에서의 소음 수준을 비교하였다. 대형 캐비테이션 터널 내 Suboff 잠수함 선형과 펌프젯 추진기를 대상으로 균일혼상류 가정의 비정상 비압축성 Reynolds averaged Navier-Stokes(RANS) 방정식을 적용하였으며, 이상 유동을 모사하기 위해 Volume of Fluid(VOF) 기법과 Schnerr-Sauer 공동 모델을 적용하였다. 유동해석 결과를 기반으로 수중방사소음을 예측하기 위해 Ffowcs Williams and Hawkings(FW-H) 방정식 기반의 음향상사법을 적용하였으며, 덕트와 스테이터, 로터로 구성된 3개의 비투과성 적분면과 추진기를 감싸는 형태의 2가지 투과성 적분면을 선정하여 소음 기여도를 평가하였다. 소음 예측결과로부터 스테이터는 전체 소음에 대한 직접적인 기여도는 낮으나 덕트와 로터에서의 유동 박리에 의한 소음원 형성에는 영향을 미치는 것을 확인하였으며, 유동이 박리되는 연직상방과 우측방향으로 소음이 크게 방사되었다. 또한 로터에서는 날개의 흡입면과 압력면 간의 압력 섭동에 의해 추진방향으로 소음이 크게 방사되었으며, 투과성적분면을 통해 체적 소음원인 공동의 효과를 반영할 수 있음을 확인하였다.

• 한국음향학회지
• /
• 제43권1호
• /
• pp.103-111
• /
• 2024

축류팬은 상대적으로 저압의 유동 영역에서 유동을 수송하기 위해 사용되며, 다양한 설계 변수에 대해 설계된다. 축류팬의 날개 끝 형상은 유동 및 소음 성능에 지배적인 역할을 수행하며 이에 대한 대표적인 유동 현상으로 날개 끝에서 발생하는 날개 끝 와류와 누설 와류가 있다. 이러한 3차원 유동 구조를 제어하기 위해 다양한 연구가 수행되어 왔으며, 항공기 분야에서 날개 끝 와류를 억제하고 효율을 증가시키기 위해 윙렛 형상이 개발되었다. 본 연구에서는 에어컨 실외기용 축류팬 날개에 적용된 윙렛 형상의 영향을 분석하기 위한 수치적, 실험적 연구를 수행하였다. 3차원 유동 구조 및 유동 소음을 수치적으로 분석하기 위해 unsteady Reynolds-Averaged Navier-Stokes(RANS) 방정식과 Ffocws-Williams and Hawkings(FW-H) 방정식을 전산유체역학 기법에 기초하여 수치 해석하였으며, 실험 결과와의 비교를 통해 수치 기법의 유효성을 검증하였다. 윙렛 형상에 따른 날개 끝 와류와 누설 와류의 형성의 차이를 3차원 유동장을 통해 비교하고, 그에 따른 공기역학적 성능을 정량적으로 비교하였다. 또한, 예측 유동장을 바탕으로 소음을 수치적으로 모사하여 윙렛 형상이 유동 소음 측면에 미치는 영향을 분석하였다. 대상 팬 모델의 시제품을 제작하여 유동 및 소음 실험을 실시하여 실제 성능을 정량적으로 평가하였다.

• 한국전산유체공학회지
• /
• 제20권2호
• /
• pp.1-6
• /
• 2015

In this study, a numerical prediction on propulsive performance of a ducted propeller in open water condition was carried out by solving Reynolds averaged Navier-Stokes(RANS) equation using computational fluid dynamics(CFD). A configuration of propeller Ka-470 inside duct 19A was considered. Hexahedral grid system was generated by dividing whole computational domain into three separate regions; propeller, duct and outer flow region. A commercial CFD software, ANSYS-CFX was used for numerical simulations. Results were compared with experimental data and showed considerable improvement in accuracy, in comparison to those from surface panel method which is based on potential flow assumption. The results also exhibited the importance of grid system within the gap between the inner surface of duct and blade tip for accurate prediction of propulsive performance of ducted propeller.

• 대한조선학회논문집
• /
• 제47권3호
• /
• pp.377-387
• /
• 2010

In this study, the turbulent free surface around KVLCC1 employed in the circular motion test simulation is numerically calculated using a commercial CFD(Computational Fluid Dynamics) code, FLUENT. Also, hydrodynamic forces and yaw moments around a ship model are calculated during the steady turning. Numerical simulations of the turbulent flows with free surface around KVLCC1 have been carried out by use of RANS equation based on calculation of hydrodynamic forces and yaw moments exerted upon the ship hull. Wave elevation is simulated by using the VOF method. VOF method is known as one of the most effective numerical techniques handling two-fluid domains of different density simultaneously. Boundary layer thickness and wake field are changed various yaw velocities of ship model during the steady turning. The calculated hydrodynamic forces are compared with those obtained by model tests.

• 대한조선학회논문집
• /
• 제42권4호
• /
• pp.322-329
• /
• 2005

Viscous flows behind transom stern are analyzed based on CFD simulation results. Stern wave pattern is often complicated due to the abrupt change of stern surface curvature and flow separation at transom. When a ship advances at high speed, whole transom stern is exposed out of water, resulting in the so-called 'dry transom'. However, in the moderate speed regime, stern wave development in conjunction of flow separation makes unstable wavy surface partially covering transom surface, i.e., the so-called 'wetted transom'. Transom wave formation is usually affecting the resistance characteristics of a ship, since the pressure contribution on transom surface as well as the wave-making resistance is changed. Flow modeling for 'wetted transom' is difficult, while the 'dry transom modeling' is often applied for the high-speed vessels. In the present study CFD results from the RANS equation solver using a finite volume method with level-set treatment are utilized to assess the topology of transom flow pattern for a destroyer model (DTMB5415) and a container ship (KCS). It is found that transom flow patterns are quite different for the two ships, in conformity to the shape of submerged transom. Furthermore, the existence of free surface seems to after the flow topology in case of KCS.

• 한국전산유체공학회지
• /
• 제15권1호
• /
• pp.81-87
• /
• 2010

In this study, we conducted resistance and propulsion performance test of ship composed of the Resistance Test, Propeller Open Water Test and Self Propulsion Test using the CFD(Computational Fluid Dynamics). We used commercial RANS(Reynolds Averaged Navier Stokes equation) solver, as a calculating tool. The unstructured grids were used in a bow and stern of ship, having complex shape, for a convenience of generating grids, and the structured grids were adopted in a central hull and rest of hull having a relatively simple shape which is called hybrid grid method. In addition, The sliding mesh method was adopted to rotate a propeller directly in the Propeller Open Water and Self Propulsion Test. The Resistance Test and Self Propulsion Test were calculated using Volume of Fluid (VOF) model and considering a free surface. And all The three cases were applied realizable k-epsilon model as the turbulence model. The results of calculations were verified for the suitability of calculations by comparing MOERI's EFD results.

• 한국전산유체공학회지
• /
• 제16권4호
• /
• pp.92-99
• /
• 2011

In order to protect the turbine blade from working fluid of high temperature, many cooling techniques such as internal convection cooling, film cooling, impinging jet cooling and thermal barrier coating have been developed. With all other things, film-cooling has been widely used as the important alternative. In the present work, numerical analysis has been performed to investigate and to compare the film-cooling performance of various film-cooling hole schemes such as cylindrical, crescent, louver, and dumbbell holes. To analyze the turbulent flow and the film-cooling mechanism, three-dimensional Reynolds-averaged Navier-Stokes analysis has been performed with shear stress transport turbulence model. The validation of numerical results has been assessed in comparison with experimental data. The characteristics of fluid flow and the film-cooling performance for each shaped hole have been investigated and evaluated in terms of centerline, laterally averaged and spatially averaged film-cooling effectivenesses. Among the film cooling holes, the dumbbell shaped hole shows better film-cooling effectiveness than the other shaped holes. And the louver and cylindrical shaped hole show the worst film cooling performance, and concentrated flows on near the centerline only.

• 한국전산유체공학회지
• /
• 제17권1호
• /
• pp.94-100
• /
• 2012

In this paper, the cavitating flows around a hydrofoil have been numerically investigated by using a 2-d multi-phase RANS flow solver based on pseudo-compressibility and a homogeneous mixture model on unstructured meshes. For this purpose, a vertex-centered finite-volume method was utilized in conjunction with 2nd-order Roe's FDS to discretize the inviscid fluxes. The viscous fluxes were computed based on central differencing. The Spalart-Allmaras one equation model was employed for the closure of turbulence. A dual-time stepping method and the Gauss-Seidel iteration were used for unsteady time integration. The phase change rate between the liquid and vapor phases was determined by Merkle's cavitation model based on the difference between local and vapor pressure. Steady state calculations were made for the modified NACA66 hydrofoil at several flow conditions. Good agreements were obtained between the present results and the experiment for the pressure coefficient on a hydrofoil surface. Additional calculation was made for cloud cavitation around the hydrofoil. The observation of the vapor structure, such as cavity size and shape, was made, and the flow characteristics around the cavity were analyzed. Good agreements were obtained between the present results and the experiment for the frequency and the Strouhal number of cavity oscillation.

• 대한조선학회논문집
• /
• 제52권4호
• /
• pp.323-329
• /
• 2015

For the design guide of a vessel operating in cold region, numerical analysis was carried out to evaluate the ice class louver which installed the heating cables by using ANSYS 13.0 CFX. The numerical analysis was performed by considering Unsteady Reynolds Averaged Navier Stokes (RANS) equation. This study based on the experimental results of ‘The Cryogenic Performance Evaluation for the Excellent De-icing Ice Class Louver’ in KRISO. For validation of the numerical analysis results, the cold chamber experimental data measured by the heat sensors in certain location of the ice class louver was used. The external environmental temperature which varies from 0℃ to –30℃ was considered in numerical analysis. Also the design guide for optimum de-icing presented through heating cable power capacity(33 W/m, 45 W/m, 66 W/m), location of the heating cable(front, center, behind on the blade) and relative velocity(1 m/s, 4 m/s, 7 m/s).

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.104-111
• /
• 2011

To protect the turbine blade, many cooling techniques has developed. With all other things, film-cooling has been widely used as the important alternative. In the present work, numerical analysis has been performed to investigate and to compare the film-cooling performance of various film-cooling hole schemes such as cylindrical, crescent, louver, and dumbbell holes. To analyze the turbulent flow and the film-cooling mechanism, three-dimensional Reynolds-averaged Navier-Stokes analysis has been performed with shear stress transport turbulence model. The validation of numerical results has been assessed in comparison with experimental data. The characteristics of fluid flow and the film-cooling performance for each shaped hole have been investigated and evaluated in terms of centerline, laterally averaged and spatially averaged film-cooling effectivenesses. The dumbbell shaped hole shows better film-cooling effectiveness than other shaped holes. And the louver and cylindrical shaped hole shows lower one, and concentrated flow on centerline only.