• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1150-1155
• /
• 2008

Parameter analysis has been performed for an equal channel angular process. The processing variables such as channel configuration, friction coefficient, and ram speed were investigated by means of the magnitudes and distributions of effective plastic strain analysis through the deformation. The materials considered were pure aluminum and titanium. Here firstly, a finite element implementation by using the commercial ABAQUS software was carried out for both the aluminum and titanium materials based on the L-channel configuration. The experimental investigation then has been conducted using the obtained data. Finally, the ability of robust metals which can be produced by the optimized ECAP has been discussed by the appropriate parameter analysis.

• 한국정보통신학회논문지
• /
• 제21권11호
• /
• pp.2206-2212
• /
• 2017

현대 해상전에서 함정의 피탐지율은 생존성에 직접적인 요소이며, 레이다 반사면적(RCS; Radar Cross Section)은 피탐지율에 있어서 주요 변수 중 하나이다. 본 논문에서는 RCS 감소기법 중 하나인 레이다 신호를 흡수하는 특수 재질을 통한 RCS 감소 기법인 RAM(Radar Absorbing Materials) 방법을 이용하여 위협 주파수 대역의 RCS 해석을 수행하였다. 해석 모델은 모형선 모델을 이용하였고, RAM 기법에 적용될 전파흡수체는 최신 전파흡수체 기술인 광대역 메타물질을 적용하였다. 광대역 메타물질은 광대역에서 공진주파수를 갖는 MIK 공진구조와 유연성 기판을 이용하여 모델링을 수행하였고, 광대역 메타물질의 성능 분석을 위하여 전자기파의 흡수율과 반사율에 대한 모의실험을 수행하였다. 또한, 광대역 메타물질 적용에 따른 레이다 반사면적 감소효과를 분석하기 위하여 기존 전파흡수체와의 비교를 통하여 RCS 감소 효과를 분석하였다.

• Journal of Computational Design and Engineering
• /
• 제3권4호
• /
• pp.330-336
• /
• 2016

The present work is concerned with heat and mass transfer of an electrically conducting second grade MHD fluid past a semi-infinite stretching sheet with convective surface heat flux. The analysis accounts for thermophoresis and thermal radiation. A similarity transformations is used to reduce the governing equations into a dimensionless form. The local similarity equations are derived and solved using Nachtsheim-Swigert shooting iteration technique together with Runge-Kutta sixth order integration scheme. Results for various flow characteristics are presented through graphs and tables delineating the effect of various parameters characterizing the flow. Our analysis explores that the rate of heat transfer enhances with increasing the values of the surface convection parameter. Also the fluid velocity and temperature in the boundary layer region rise significantly for increasing the values of thermal radiation parameter.

• 대한인간공학회지
• /
• 제21권2호
• /
• pp.59-70
• /
• 2002

This paper is about the evaluation of stress response and recovery using biosignals and fuzzy theory. We caused mental stress by means of a coin-stacking task. During the experiment, 4 kinds of biosignals, including frontalis EMG, ECG, peripheral skin temperature and skin conductance level, were acquired. Then, the degree of stress was assessed by synthetically those signals using fuzzy inference. From the fuzzy inference result, the parameters (amount of physiological change / amount of imposed stress) and (time to 25% recovery), which represent response and recovery respectively, were derived. We made a two-dimensional point graph using the response parameter as an abscissa and the recovery parameter as an ordinate for each subject.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.348-350
• /
• 2006

In this paper, we design a new controller for an ultra-precision positioning system. In general, time optimal control enables to reach a target position faster than others. However it shows a weakness to chattering effect. In order to solve the problem, a new control algorithm based on sliding mode control is proposed. The suggested controller is composed of LQR control and sliding mode control. By performing some simulations, we prove that the proposed controller is more robust than time optimal control under the circumstance of parameter uncertainties and external disturbances.

• Journal of Electrical Engineering and Technology
• /
• 제5권2호
• /
• pp.276-281
• /
• 2010

The switched reluctance motor (SRM) is an older member of the electric machines family. Its simple structure, ruggedness and inexpensive manufacturing potential make it extremely attractive for industrial applications. However, these merits are overshadowed by its inherent high torque ripple, acoustic noise and difficulty to control. In this paper, a control strategy of the angle position control for the SRM drive based on fuzzy logic is illustrated. The input control parameter, the output control parameter and fuzzy control with FAM table formulation strategy are described and simulated with control patterns, and the decision form of the fuzzy control is illustrated and simulated, and the scope of implementing in a Fuzzy based ASIC chip is enlightened with literature support.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.1009-1012
• /
• 1999

Recently, there is a strong need of DVD (Digital Versatile Disk) system of high density. high speed, and high accuracy System performances mostly depend on not only optical system, but also servo technology to drive it. Therefore, we investigate main technology concerned with optical pick-up unit based on 4.7GB DVD-RAM and analyzes technology of optical and servo systems that are required for high density high speed and high accuracy from the viewpoint of control. And then, we design a linear controller based on specification of 4.7GB DVD-RAM that is commercially available now. We analyze the dynamic characteristics of optical system that is coupled with control system and verify effect on performance indices of servo due to Parameter variation of pick-up by simulation. Finally, we will propose controller design specifications and provide direction of technical development for servo system and problems coupled with high capacity for 15GB level in the future.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2005년도 제7회 특별심포지움 논문집
• /
• pp.3-9
• /
• 2005

In order to obtain more reliable data for the information on the ground, a new site Investigation method is proposed, in which seismic waves (S-waves) generated by the Swedish Ram Sounding Test (SRS) are used. It is indicated that the energy transferred from the hammer to the rod in SRS's is much more stable, compared to SPT's. A series of SRS with measurements of seismic waves at the ground surface were carried out to clarify the characteristics of seismic wave propagation in the ground. As the results of comparison between seismic S-wave amplitudes and $N_d$ (blow count for 20 cm penetration in SRS), it was found that amplitudes of S-waves generated by SRS correlate well with $N_d$. The amplitude of the S-wave is thought to be more adequate parameter for the soil strength and rigidity than $N_d$.

• 대한수학회보
• /
• 제54권6호
• /
• pp.1951-1967
• /
• 2017

We aim to introduce a further extension of a family of the extended Hurwitz-Lerch Zeta functions of two variables. We then systematically investigate several interesting properties of the extended function such as its integral representations which provide extensions of various earlier corresponding results of two and one variables, its summation formula, its Mellin-Barnes type contour integral representations, its computational representation and fractional derivative formulas. A multi-parameter extension of the extended Hurwitz-Lerch Zeta function of two variables is also introduced. Relevant connections of certain special cases of the main results presented here with some known identities are pointed out.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권10호
• /
• pp.727-732
• /
• 2004

TCXO is one of the most important component in communication systems. We present a analytic method approach to design the Temperature Compensated Circuit. The conventional method for extracting the circuit parameters, which are for thermistor, Colpitts and frequency control circuit is the trial and error correction. In this paper, we analyse the temperature compensating circuit to extract TCXO circuit parameter. In order to show the validity of this paper, we have designed and implemented the 10MHz TCXO. The fabricated TCXO shows 1ppm frequency drift characteristic over the temperature range of -40℃∼85℃.