• The Korean Journal of Community Living Science
• /
• v.27 no.3
• /
• pp.509-520
• /
• 2016

This study was carried out to investigate the effects of adding rosemary extract powder (REP) to pork teokgalbi on its quality and storage characteristics. Five types of teokgalbi were tested, viz. with no REP added (normal, N), with 0.05% ascorbic acid added (control, C) and with 0.05% (R1), 0.1% (R2) and 0.2% (R3) of REP added. The proximate composition, calorific value, water holding capacity and cooking loss were not significantly different among the different types of pork teokgalbi. The L and a values of the teokgalbi containing REP were significantly lower than those of the N and C groups. As regards the textural characteristics, the addition of 0.2% REP increased the springiness value. In the sensory evaluation, the teokgalbi with the addition of 0.1% REP had higher scores in flavor and total acceptability. The 2-thiobarbituric acid (TBA) value, total microbial count and volatile basic nitrogen content of the teokgalbi containing 0.2% REP were lower than those of the N group. In conclusion, R3 was significantly more effective in delaying lipid peroxidation than the other treatment groups. Therefore, rosemary extract could be used as a natural antioxidant in meat products.

• Journal of Life Science
• /
• v.34 no.2
• /
• pp.86-93
• /
• 2024

Since replication of plasmids must be strictly controlled, plasmids that generally perform rolling circle replication generally maintain a constant copy number by strictly controlling the replication initiator Rep at the transcriptional and translational levels. Plasmid pJB01 contains three orfs (copA, repB, repC or repABC) consisting of a single operon. From analysis of amino acid sequence, pJB01 CopA was homologous to the Cops, as a copy number control protein, of other plasmids. When compared with a CopG of pMV158, CopA seems to form the RHH (ribbon-helix-helix) known as a motif of generalized repressor of plasmids. The result of gel mobility shift assay (EMSA) revealed that the purified fusion CopA protein binds to the operator region of the repABC operon. To examine the functional role of CopA on transcriptional level, 3 point mutants were constructed in coding frame of copA such as CopA R16M, K26R and E50V. The repABC mRNA levels of CopA R16M, K26R and E50V mutants increased 1.84, 1.78 and 2.86 folds more than that of CopA wt, respectively. Furthermore, copy numbers owing to mutations in three copA genes also increased 1.86, 1.68 and 2.89 folds more than that of copA wt, respectively. These results suggest that CopA is the transcriptional repressor, and lowers the copy number of pJB01 by reducing repABC mRNA and then RepB, as a replication initiator.

• Korean Journal of Microbiology
• /
• v.31 no.1
• /
• pp.44-47
• /
• 1993

A replication initiation gene was identified and its nucleotide sequence has been determined from a 3.8 kb, chloramphenicol acethyltransferase conferring R-plasmid pSBK203 of Staphylococcus aures. Location of the replication related region of pSBK 203 was determined by interuption with pUC 119 at XBaI and MspI sites which resulted in inactivation of replication in Bacilius subtilis. Base sequence of this region revealed on open reading frame of 942 base pairs, which encoded a 314 amino acid protein. Base sequence homology with other rep of pT181 family plasmids such as pT181, pC221, pC223, pS194, pU112, and pCW7 was ranged from 78% to 97% and the predicted amino acid sequence homology was from 72% to 95%.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.3
• /
• pp.220-232
• /
• 2007

Current geometric modeling and analysis are commonly based on B-Rep modeling and a finite elements method respectively. Furthermore, it is difficult to represent an object whose material property is heterogeneous using the B-Rep method because the B-Rep is basically used for homogeneous models. In addition, meshes are required to analyze a property of a model when the finite elements method is applied. However, the process of generating meshes from B-Rep is cumbersome and sometimes difficult especially when the model is deformed as time goes by because the topology of deforming meshes are changed. To overcome those problems in modeling and analysis including homogeneous and heterogeneous materials, we suggest a unified modeling and analysis method based on implicit representation of the model using R-function which is suggested by Rvachev. For implicit modeling of an object a distance field is approximated and blended for a complex object. Using the implicit function mesh-free analysis is possible where meshes are not necessary. Generally mesh-free analysis requires heavy computational cost compared to a finite elements method. To improve the computing time of function evaluation, we utilize GPU programming. Finally, we give an example of a simple pipe design problem and show modeling and analysis process using our unified modeling and analysis method.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.10
• /
• pp.1778-1782
• /
• 2017

To identify and discriminate the bacterial species at the subspecific level, rep-PCR is a reliable genomic fingerprinting tool. Fourteen strains of bacteria were isolated from different food sources, identified as Leuconostoc citreum using 16S rRNA gene sequencing, and amplified using rep-primers (REP, ERIC, and $(GTG)_5$). Fingerprinting patterns generated bands in the range of 300-6,000 bp with REP, 150-6,000 bp with ERIC, and 200-1,700 bp with $(GTG)_5$ primers. In UPGMA dendrogram analysis, 14 strains were clustered into three clades (I, II, and III) with all the primers, thus differentiating them at the molecular level. The present study revealed the differentiation of L. citreum strains using rep-PCR.

• Korean Journal of Microbiology
• /
• v.32 no.3
• /
• pp.186-191
• /
• 1994

The origin of the leading strand replication (ori) and of lagging strand replication (M-O) of R-plasmid pSBK203 was identified and its base sequence was determined. About 50 bp of ori sequence residues overlapped with the structural gene of rep. Sequence comparison reveals that pSBK-ori shares obvious identities with those of pT181 family and consists of two regions, one is conserved and the other is variable region. Of two palindrome sequence located one after another in upstream region of rep gene, palA' instead of palA which shares sequence homology with diverse family of plasmids such as pOX6, pC194, and pE194 seems to act as a signal for conversion of primarily replicated ssDNA to dsDNA (minus origin (M-O)).

• BMB Reports
• /
• v.29 no.1
• /
• pp.63-67
• /
• 1996

In order to elucidate the molecular mechanism of plasmid incompatibility of broad host-range plasmid R1162, the plasmid-encoded replication protein RepIB was purified and tested for binding to the 20 bp direct repeat (DR) DNA sequence which is reiterated 3 and 1/2 times within the replicative origin of the plasmid. The RepIB protein specifically binds to the DR DNA. Point mutations in the DR which affect expression of plasmid incompatibility also coordinately affect binding. These results indicate that the incompatibility of broad host-range plasmid R1162 is exerted by the DR DNA by titrating the essential replication protein RepIB.

• YAKHAK HOEJI
• /
• v.39 no.6
• /
• pp.676-680
• /
• 1995

The nucleotide sequence of Xbal-Mbol fragment of pKH7, a chloramphenicol-resistant($Cm^{r}$) plasmid isolated from multidrug-resistant S. aureus SA2, has been determined. Xbal-Mbol fragment of pKH7 was found to contain two ORFs. One ORF encoded Rap and the other encoded CAT protein. The deduced amino acid sequences of Rep and CAT of pKH7 were compared to those of pUB112 and pC221. Comparisons revealed that there was one amino acid difference in CAT between pKH7 and pUB112. CAT of pKH7 exhibited 98.6% amino acid identity to that of pC221. In case of Rep proteins, a slightly lower homology of 96.4% and 86.7% in amino acid sequences was observed between pKH7 and pUB112 and between pKH7 and pC221, respectively.

• Korean Journal of Food Science and Technology
• /
• v.37 no.4
• /
• pp.611-617
• /
• 2005

Dispersed repetitive DNA elements in genomes of microorganisms differ among and within species. Because distances between repetitive sequences vary depending on bacterial strains, genomic fingerprinting with interspersed repetitive sequence-based probes can be used to distinguish unrelated organisms. Among well-known bacterial repetitive sequences, Repetitive Extragenic Palindromic (REP) sequence has been used to identify environmental bacterial species and strains. We applied REP-PCR to detect and differentiate four major Gram-negative food-borne bacterial pathogens, E. coli, Salmonella, Shigella, and Vibrio. Target DNA fragments of these pathogens were amplified by REP-PCR method. PCR-generated DNA fragments were separated on 1.5% agarose gel. Dendrograms for PCR products of each strain were constructed using photo-documentation system. REP-PCR reactions with primer pairs REP1R-I and REP2-I revealed distinct REP-PCR-derived genomic fingerprinting patterns from E. coli, Salmonella, Shigella, and Vibrio. REP-PCR method provided clear distinctions among different bacterial species containing REP-repetitive elements and can be widely used for typing food-borne Gram-negative strains. Results showed established REP-PCR reaction conditions and generated dendrograms could be used with other supplementary genotyping or phenotyping methods to identify isolates from outbreak and to estimate relative degrees of genetic similarities among isolates from different outbreaks to determine whether they are clonally related.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.3
• /
• pp.599-606
• /
• 2004

Gram-positive antagonistic bacilli were isolated from agricultural soils for possible use in biocontrol of plant pathogenic fungi, Fusarium oxysporum, Rhizoctonia solani, and/or Pythium ultimum. Among the 65 antagonistic Gram-positive soil isolates, 22 strains were identified as Bacillus species by 16S rDNA sequence analyses. Four strains, including DF14, especially exhibited multiple antagonistic properties against the three damping-off fungi. Genotypic properties of the Bacillus isolates were characterized by rapid molecular fingerprinting methods using repetitive extragenic palindromic-PCR (REP-PCR), ribosomal intergenic spacer-length polymorphisms (RIS-LP), 16S rDNA PCR-restriction fragment length polymorphisms (PCR-RFLP), and strain-specific PCR assays. The results indicated that the REP-PCR method was more valuable than the RIS-LP and 16S rDNA PCR-RFLP analyses as a rapid and reliable approach for bacilli typing and identification. The use of strain-specific primers designed based on 16S rDNA sequence comparisons enabled it to be possible to selectively detect a strain, DF14, which is being used as a biocontrol agent against damping-off fungi.