• Journal of the Korea Convergence Society
• /
• v.10 no.7
• /
• pp.87-92
• /
• 2019

This study was to investigate the convergence relationship of self-esteem, empathy ability and interpersonal relationship ability of 351 dental hygiene students in Jeollabuk-do area. The data were analyzed using SPSS software program 22.0. In case of interpersonal relationship ability, there were significantly different means with health state(p=0.005) and major satisfaction(p=0.004). Self-esteem, empathy ability and interpersonal relationship ability was positive correlated(r=0.600, p<0.01). The factors influencing interpersonal relationship ability were self-esteem and empathy ability(p<0.001). The explanatory power of the study was 38.0%. It is necessary to develop a dental hygiene education program for improving self-esteem, empathy ability and interpersonal relationship ability.

• Journal of the Korean Society of Radiology
• /
• v.16 no.3
• /
• pp.265-271
• /
• 2022

This study retrospectively analyzed the test results of 441 patients who visited Hospital I in Busan from October 2021 to December 2021 and conducted both mid-term ultrasound and fibroscan tests. The purpose of the study was to investigate the usefulness of fibroscan in inter-fat evaluation by conducting correlation analysis and chi-squared test of inter-fat evaluation using liver ultrasound and fibroscan. As a result of analyzing the correlation between the fatty liver reading result of abdominal ultrasound and Fibroscan UAP, the correlation was found to be r=0.600 and p=0.000. In the inter-provincial evaluation, Fibroscan showed high validity in predicting objective results using inter-provincial values.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1999.06a
• /
• pp.51-67
• /
• 1999

The growth of crystals with high melting points tfus$\geq$1$600^{\circ}C$ faces the researcher with experimental problems, as the choice of materials that withstand such high t is rather limited. Many metallic construction materials are in this high t range already molten or exhibit at least a drastically reduced mechanical strength. The very few materials with tfus》1$600^{\circ}C$ as e.g. W, Mo, and partially even Ir are more or less sensitive against oxygen upon heating. Whenever possible, high t crystal growth is performed under inert atmosphere (noble gases). Unfortunately, any oxides are not thermodynamically stable under such conditions, as reduction takes place within such atmosphere. A thoroughly search for suitable growth conditions has to be performed, that are on the one side "oxidative enough" to keep the oxides stable and on the other side "reductive enough" to avoid destruction of constructive parts of the crystal growth assembly. The relevant parameters are t and the oxygen partial pressure pO2. The paper discusses quantitatively relevant properties of interesting oxides and construction materials and ways to forecast their behavior under growth conditions.r growth conditions.

• Korean Journal of Microbiology
• /
• v.30 no.4
• /
• pp.322-331
• /
• 1992

In order to understand the transfer and behavior of R gene in water environments. the Kmr gene in the genetically modified microorganisms(GMMs) w,is studied by conjugation. The plasmid variously rearranged in the conjugants were comparatively analyzied by agarosc gel electrophoresis and the specific Km' genes in the gel were tletected with DNA probe. The Kmr genes of the GMM strains(DKC600 and DKC601) were transferred at higher rate than those of natural isola~e(DKI)b, ut the ratc was a little diflurent depending upon the recipient strains. Rearrangement of the plasmids appeared morc drastic in GMM strains than in IIKI as donor. The transfer frequencies of the Km' genes in LR broth were remarkably higher than in the water of AW and FW without regards to the strains. In LA breth. the frequencies of Kmr genes were higher at 25'C-30$^{\circ}$C than at 10$^{\circ}$C and at pH - 7 than pH 9, but temperature and pH of the FW did n,,t affect to the frequency. And the conjugants from GMM strains in FW did not showed any plasmids. except tor 43 kb plasmiil. As results of Southern analysis of the plasmid, variously rearranged in eonjugant cells obtained in LB broth, the Kmr genes were detected at the same position of Km' plasrnids of the donor cell(DK1 and GMM strains). But Km' plasmid disappeared in the conjugants obtained in F'W and their chronlosomes showed strong signal of hybridization. The Kmr plasmid of DKl in the conjugants obtained in FW water was transferred and maintained its size, but the Kmr plasinids of the GMM strains were all integrated into chromosome. Therefore, the Kmr plasmids of DKI anit GMM strains in LH were intactly transferred and other plasmitls were variously rearranged. but Km' gene of DKC600 in FW water was integrated into the chromosorn: without regards to the temperature and pH of the water.

• Journal of Microbiology
• /
• v.41 no.3
• /
• pp.252-258
• /
• 2003

The carbon utilizations of Bacillus species and Pythium species were investigated by using a Biolog$^{(R)}$ microplate assay to determine if there are differences in the carbon utilizations of selected strains of these species. It may be possible to afford a competitive advantage to bacterial biological control agents by providing them with a substrate that they can readily use as a carbon source, for example, in a seed coating formulation. Microplates, identified as SFP, SFN and YT were used to identify spore-forming bacteria, nonspore-forming bacteria, and yeast, respectively. Bacterial and mycelial suspensions were adjusted to turbidities of 0.10 to 0.11 at 600 nm. One hundred microliters of each of the bacterial and mycelial suspension were inoculated into each well of each of the three types of microplates. L-arabinose, D-galactose, D-melezitose and D-melibiose of the 147 carbohydrates tested were found to be utilized only by bacteria, and not by Pythium species, by Biolog$^{(R)}$ microplate assay, and this was confirmed by traditional shake flask culture. Thus, it indicated that the Biolog$^{(R)}$ microplate assay could be readily used to search for specific carbon sources that could be utilized to increase the abilities of bacterial biological control agents to adapt to contrived environments.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1528-1535
• /
• 2009

Characteristics of R-22 and R-134a two-phase vaporization in horizontal small tubes were investigated experimentally. In order to obtain the local heat transfer coefficients, the test was ran under heat flux range of 10 to $40\;kW/m^2$, mass flux range of 200 to $600\;kg/m^2s$, saturation temperature range of 5 to $10^{\circ}C$, and quality up to 1.0. The test section, which was made of stainless steel tube and heated uniformly by applying an electric current to the tube directly, have inner tube diameters of 0.5, 1.5 and 3.0 mm, and lengths of 0.33 and 2.0 m. The effects on heat transfer coefficient of mass flux, heat flux and inner tube diameter were presented. The experimental heat transfer coefficients were compared with the predictions using existing heat transfer coefficient correlations. A new boiling heat transfer coefficient correlation based on the superposition model, with considering the laminar flow, was developed.

• Korean Journal of Materials Research
• /
• v.8 no.10
• /
• pp.956-960
• /
• 1998

The interfacial reaction between the CoINb bilayer and the $SiO_2$ substrate in the temperature range of $330^{\circ}C$-$800^{\circ}C$ in a vacuum has been investigated by X-ray photoelectron spectroscopy, glancing angle XRD, Auger Electron Spectroscopy and Atomic force microscopy. The Co and Nb were actively interdiffused at $600^{\circ}C$, and the layer inversion completed at $700^{\circ}C$. NbO was formed by interfacial reaction between the Nb interlayer and the $SiO_2$ substrate, while $Nb_20_5$ was formed on the surface by reaction of Nb with oxygen in the ambients. Free Si atoms obtained by the reaction between Nb and $SiO_2$ formed silicides like CoSi and $Nb_5Si_3$ by reacting with Co and Nb remnants. The sheet resistance of the Co/Nb bilayer increased substantially after annealing at $800^{\circ}C$. which is due to the agglomeration of the Co layer to reduce its surface energy.

• Structural Engineering and Mechanics
• /
• v.72 no.2
• /
• pp.245-256
• /
• 2019

The experimentally determined mechanical behavior of the material under the prescribed service conditions is the basis of advanced engineering optimum design. To allow experimental data on the behavior of the material considered, uniaxial stress tests were made. The aforementioned tests have enabled the determination of mechanical properties of material at different temperatures, then, the material's resistance to creep at various temperatures and stress levels, and finally, insight into the uniaxial high cyclic fatigue of the material under different applied stresses for prescribed stress ratio. Based on fatigue tests, using modified staircase method, fatigue limit was determined. All these data contributes the reliability of the use of material in mechanical structures. Data representing mechanical properties are shown in the form of engineering stress-strain diagrams; creep behavior is displayed in the form of creep curves while fatigue of the material is presented in the form of S-N (maximum applied stress versus number of the cycles to failure) curve. Material under consideration was 18CrNi8 (1.5920) steel. Ultimate tensile strength and yield strength at room temperature and at temperature of $600^{\circ}C$: [${\sigma}_{m,20/600}=(613/156)MPa$; ${\sigma}_{0.2,20/600}=(458/141)MPa$], as well as endurance (fatigue) limit at room temperature and stress ratio of R = -1 : (${\sigma}_{f,20,R=-1}=285.1MPa$).

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2006.04a
• /
• pp.600-601
• /
• 2006

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.272-273
• /
• 2005

전력선 통신을 위한 커플러용 자심재료의 열처리 온도증가에 따라 결정이 성장하여 인덕턴스는 증가 하였고, $550^{\circ}C$ 이상에서는 포화점을 나타내었다. 커플러는 자심재료의 투자율이 높을수록 커플러의 저주파 대역의 신호전승 특성이 우수하게 나타났지만, 주파수 증가에 따라 급격히 저하하는 불안정한 특성을 나타내었다. 그리고 절단면 사이의 Air gap 증가에 따라 10 MHz이하의 주파수 대역에서 신호전승특성이 급격히 감소하였고, 허용전류는 직선적으로 증가하였으며 Air gap이 $600{\mu}m$이상일 때 300A의 전류에서 특성을 발휘하였다.