• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.4
• /
• pp.361-367
• /
• 2010

The use of antifouling(AF) paints is the effective method for the protection of underwater structures from the development of marine fouling organisms. The ban on harmful substances in antifouling paints requires the development of new antifouling strategies although Tributyitin (TBT) compound had been used extensively as an active ingredient Alternatives should be as effective as conventional paints but have lower toxicity. In the present study, a TBT-free self-polishing (Cu SPC) AF paint containing $Cu_2O$, a Cu free SPC AF paint, and a Foul-release silicone AF paint, which were commercially available, were examined to investigate environmental erects of leakage waters employing Sebastes shlegeli and Artemia. Survival rates were inversely proportional to the concentration of leakage waters from AF paints and the acute toxicity of SPC AF paints was relatively higher than that of foul release AF paints.

• Journal of Biomedical Engineering Research
• /
• v.25 no.4
• /
• pp.243-251
• /
• 2004

This study was to quantitative analysis compare to dynamic characteristic change of the regional cerebral blood volume (rCBV) after development of cerebral fat embolism in cats using perfusion MR Imaging. Forty-four adult rats were used. Triolein (n = 15), oleic acid (n = 9) and linoleic acid (n = 11) were injected into the internal carotid artery using microcatheter through the transfemoral approach. Polyvinyl alcohol (Ivalon) (n = 9) was injected as a control group. Perfusion MR images were obtained at 30 minutes and 2 hours after embolization, based on T2 and diffusion-weighted images. The data was time-to-signal intensity curve and ΔR$_2$＊ curve were obtained continuously with the aid of home-maid image proc in.leased significantly at 2 hours compared with those of 30 minutes (P＜0.005). In conclusion, cerebral blood flow decreased in cerebral fat embolism immediately after embolization and recovered remarkably in time course. It is thought that clinically informations to dynamic characteristic change of the cerebral hemodynamics to the early finding in cerebral infarction by DWI and PWI

• Journal of the Korea Computer Industry Society
• /
• v.2 no.2
• /
• pp.157-164
• /
• 2001

This paper studies on the processing of spatial joins. The spatial join operation is divided into filters and refinement steps in general. The processing of spatial joins can be greatly improved by the use of filters that reduce the polygons in order to find the intersecting ones. As a result, three possible sets of answers are identified: the positive one, the negative one and the inconclusive one. To identify all the interesting pairs of polygons with inconclusive answers, it is necessary to have access to the representation of polygons so that an exact geometry test can take place. We introduce a bit-map approximation technique to drastically reduce the computation required by the refinement step during refinement processing. Bit-map representation are used for the description of the internal, the external and the boundary regions of the polygon objects. The proposed scheme increases the chance of trivial acceptance and rejection of data objects, and reduces unnecessary disk accesses in query processing. It has been shown that the reference to the object data file can be cut down by as much as 60%.

• 월간 기계설비
• /
• no.11 s.184
• /
• pp.57-71
• /
• 2005

SHOP DWG의 현주소 어디까지 왔는가? 설계에서 제조에 이르는 전 과정을 컴퓨터로 제어하고 관리하는 기술. 캐드(CAD)와 캠(CAM)은 각각 computer-aided design,computer-aided manufacturing의 약칭으로 컴퓨터보조설계와 컴퓨터보조생산을 뜻한다. CAD는 설계도면을 한 장씩 수작업으로 제도하지 않고 설계 데이터베이스의 정보를 CRT(cathode ray tube)에서 화상을 보고 합성하면서 설계하므로 작업을 최적화 할 수 있다. CAD로 설계된 설계도의 내용은 CAM을 통해 NC(수치제어)공작기계에 정확한 작업동작을 지시하게 되며, 작업관리∙가공∙조립∙검사 등의 제조과정을 컴퓨터로 관리하여 작업속도와 제품의 정밀성을 높이게 된다. 최근에는 건축현장의 2D system이 보편화되어 있지만 건축현장의 핵심이라고 할 수 있는 기계설비의 기계실, 또는 조립화 공법 등에는 3차원 CAD∙CAM시스템이 개발되어 입체형상을 화면에 3차원으로 재현할 수 있고, 대상물의 표면적∙부피∙무게∙강도 등의 물리적 성질도 자동 계산하여 최적상태에서 현장의 시공에 적용할 수 있게 되었다. 1960년대 초 미국에서 자동차 모델∙엔진, 항공기 부품 등 의 설계에 수작업의 한계를 느껴 개발되었으며, 한국에서는 70년대 중반에 도입되어 운용되고 있다. 이에 따라 프로그램 회사들은 다양한 방법 등을 SHOP DWG에 적용하여 판매경쟁이 치열하다. (주)우진아이엔에스는 급속한 산업경제의 변화와 무한경쟁시대에 보다 나은 기술개발 투자에도 노력을 기울여, 2000년 11월 용인공장, 생산라인을 천안으로 이전, 확장 하여 배관 및 닥트의 CAD-CAM SYSTEM, P.F.P공법, 기계실3D, 블럭화배관, 닥트자동화 시스템, 설계, 용접공정을 공장화시켰으며, 신 개발품인 S.C.D(SEMI-CON DUCT)를 신설하여 모든 건축물에 맞는 필수적인 제품을 생산함으로써 선택의 폭을 넓히고, 현장 시공능력 효율을 높이고 있다. 이번 호에서는 (주)우진아이엔에스가 95년 설계팀을 발족하여 제로시스템의 3D공법을 공장 및 현장의 SHOP DWG에 적용해왔고 최근에는“서초 프로젝트A”현장에 SHOP DWG의 최대 결집체인 3D활용의 조립화 공법을 적용하여 초고층 오피스텔현장을 시공한 사례를 게재한다. 우진아이엔에스는 30여년의 기술 축척을 바탕으로 최고의 기술력과 풍부한 경험을 통해 아셈무역센타, 타워팰리스1차, 3차 및 목동트라팰리스, 분당트리폴리스, 수원삼성전자 R4, 등 국내굴지의 초고층빌딩 시공을 근거로 초고층의 기본설계를 이해하고 SHOP DWG을 통해서 기계설비공사의 향후 나아갈 지표를 제시하고 있다.

• YAKHAK HOEJI
• /
• v.46 no.5
• /
• pp.313-319
• /
• 2002

Synthesis of 7$\beta$-[(Z)-2-(2-aminothiazol-4-yl)-2-(1-carboxy-1-methylethoxyimino)acetamido]-3-[[(3S, 5S)-5-[4-phenyl-5-(4-methylphenyl or 2-thiophenyl)-4H-l, 2, 4- triazol-3-yl]thiomethylpyrrolidin-3-yl]]thiomethyl-3-cephem-4-carboxylic acids (7a, 7b) were described. (2S, 4S)-4-acethylthio-2-[4-phenyl-5-(4-methylphenyl or 2-thiophenyl)-4 H-1, 2, 4-triazol-3-yl]thiomethyl-1-tert-butoxycarbonylpyrrolidines (4a, 4b) were prepared from trans-4-hydroxy-L-proline with (2S, 4R)-absolute configuration as starting material. 4-Phenyl-5-(4-methylphenyl or 2-thiophenyl)-4 H-l, 2, 4-triazol-3-thiols (2a, 2b) were prepared from p-toluic anhydride and 2-thiophene carboxylic acid hydrazide, respectively. p-Methoxybenzyl 7$\beta$-(Z)-2-(2-for-mamidothiazol-4-yl)-2-(1-tert-butoxycarbonylisopropylimino]acetamido-3-[[ (3S, 5S)-5-[4-phenyl-5-(4-methylphenyl or 2-thio phenyl)-4H-1, 2, 3-triazol-3-yl]thiomethyl-1- tert-butoxycarbonylpyrrolidin-3-yl]]thiomethyl-3-cephem-4-carboxylates (6a, 6b) were achieved by using p-methoxybenzyl ]7P-(Z)-2-(2-formamidothiazol-4-yl)-2-(tert-butoxycarbonylisopropylimino] acetamido-3-chloromethyl-3-cephem-4-carboxylate (5) and (2S, 4S)-4-acethylthio-2-[4-phenyl-5-(4-methyl phenyl or 2-thiophenyl)-4H-1, 2, 4-triazol-3-yl]thiomethyl-1-tert-butoxycarbonyl pyrrolidines (4a, 4b). Removal of formyl, Boc, and p-methoxybenzyl protecting groups were carried out by triflu oroacetic acid and anisole to give the target compounds.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.6
• /
• pp.223-234
• /
• 1996

The purpose of this paper is to present an analysis method by using the finite element method which can exactly analyze load-deflection relationships, crack propagations. and stresses and strains of reinforcements, tendons, and concrete in behaviors of elastic. inelastic and ultimate ranges of reinforced and prestressed concrete slabs under monotonically increasing loads. For t h i s purpose, the m a t e r i a l and geometric nonlinearities are taken into account in this study. The total Lagrangian formulation based upon the simplified Von Karman strain expressions is used to take into account the geometric nonlinearities of the structure. The material nonlinearities are taken into account by comprising the tension, compression. and shear models of cracked concrete and models for reinforcements and tendons in the concrete : and also a so-called smeared crack model is incorporated. The reinforcements and t,endons are assumed to be in a uniaxial stress state and are modelled as smeared layers of equivalent thickness. For the verification of application and validity of the method proposed in this paper, several numerical examples are analyzcd and compared with experimental results. As a result, this method can successfully predict the nonlinear and inelastic behaviors throughout the fracture of reinforced and prestressed concrete slabs.

• Polymer(Korea)
• /
• v.35 no.4
• /
• pp.342-349
• /
• 2011

The effect of the amount of vinyltriethoxysilane (VTEOS) in precipitated silica filled silicone rubbers was extensively investigated in terms of the change of mechanical properties, heat resistance, oil resistance, compression set, resilience, and curing characteristics. As the content of VTEOS increased from 0 to 2.0 phr, the hardness of the silicone rubber increased, however, tensile strength, elongation at break, and tear strength decreased. From heat resistance test, the change of mechanical properties was pronounced for silicone rubber treated with more VTOES. The best heat resistance was achieved at 2.0 phr VTOES. In addition, oil resistance was proportionally improved with VTEOS content. From oil resistance test. it was found that the decrease in hardness and maximum elongation was reduced for VTEOS-added systems. Finally, resilience, compression set, degree of cure and crosslink density were significantly enhanced with the amount of VTEOS.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.3
• /
• pp.67-78
• /
• 2008

With the rapid development of wireless communication and mobile equipment, many applications for location-based services have been emerging. Moving objects such as vehicles and ships change their positions over time. Moving objects have their moving path, called the trajectory, because they move continuously. To monitor the trajectory of moving objects in a large scale database system, an efficient Indexing scheme to processed queries related to trajectories is required. In this paper, we focus on the issues of minimizing the dead space of index structures. The Minimum Bounding Boxes (MBBs) of non-leaf nodes in trajectory-preserving indexing schemes have large amounts of dead space since trajectory preservation is achieved at the sacrifice of the spatial locality of trajectories. In this thesis, we propose entry relocating techniques to reduce dead space and overlaps in non-leaf nodes. we present performance studies that compare the proposed index schemes with the TB-tree and the R*-tree under a varying set of spatio-temporal queries.

• Journal of radiological science and technology
• /
• v.44 no.4
• /
• pp.335-342
• /
• 2021

Studies on the side effects of contrast agents are being discussed based on various cases, but studies analyzing the chemical structure of the underlying contrast agents are difficult to understand as the manufacturers have not disclosed them. Therefore, in this study, the chemical structure of the contrast medium was analyzed using ¹H-NMR spectrometer for Omnipaque contrast medium prepared from Iohexol, which is a nonionic iodide contrast medium, Xenetix contrast medium from Iobitridol, and Iomeron contrast medium from Iomeprol. As a result, it was found that the Omnipaque contrast medium of Iohexol had 6 carboxyl groups, 3 carbonyl groups, 4 amine groups, 1 methyl group, and 2 cyano groups. It was found that the Xenetix contrast medium of the iobitridol formulation had 6 carboxyl groups, 3 carbonyl groups, 2 amine groups, and 4 cyano groups. It was found that the Iomeron contrast agent of the Iomeprol formulation had 5 carboxyl groups, 3 carbonyl groups, 4 amine groups, 1 methyl group, and 2 cyano groups. As shown in this study, the chemical structure of the non-ionic monomer contrast agent increases its affinity with water by binding a number of hydroxyl groups (OH) to the carboxyl group. It is necessary to accurately identify each of these factors and analyze the physical and chemical changes of the contrast medium according to various environmental factors.

• Journal of Internet of Things and Convergence
• /
• v.7 no.4
• /
• pp.1-7
• /
• 2021

Recently, technological differentiation(sensor, AI) of products using IoT technology to satisfy consumer needs in the mature market for smart home appliances has received a lot of positive responses. However, air conditioner products are in the early stages of convergence technology. Therefore, air conditioner products are fields that require ICT technologies for information production, collection, processing, storage, and service development beyond IoT. In this paper, we collect and store contactless bio-signal using IR-UWB radar technology. The blowing direction of the air conditioning is controlled according to bio-signal and user's sleep is monitored to provide an optimal sleep environment. In addition, we propose a service algorithm that can provide comfort with changes in the optimal conditions of air conditioning and emotional lighting depending on the discomfort index environment. Through this study, we developed an intelligent smart air conditioning service platform with ICT technology of bio-signal, discomfort index, and emotional lighting.