• Bulletin of the Korean Chemical Society
• /
• v.33 no.12
• /
• pp.4028-4034
• /
• 2012

Tris(2-phenylphenoxo)aluminum ($(2-PhC_6H_4O)_3Al$) exists as a dimeric form in toluene. When toluene-insoluble anhydrous cobalt acetate is treated with tris(2-phenylphenoxo)aluminum in toluene, the toluene-soluble adduct $(2-PhC_6H_4O)_3Al{\cdot}Co(OAc)_2$ is formed. The 2-phenylphenoxo ligand in the adduct can be replaced with another aryloxo ligand to give (aryloxo)$(2-PhC_6H_4O)_2Al{\cdot}Co(OAc)_2$ (aryloxo = 2-methylphenoxo, 2-isopropylphenoxo, 4-methylphenoxo, 4-isopropylphenoxo, or 4-tert-butylphenoxo). These complexes are active for butadiene polymerization without gel formation when activated with an equivalent amount of $(2-PhC_6H_4O)AlEt_2$ for 2 h. The highest activity, 175 kg/mol-Co (turnover number, 3200) was achieved with $(2-PhC_6H_4O)_3Al{\cdot}Co(OAc)_2$ at $65^{\circ}C$ for 2 h. The microstructure of the polymer chains is mostly trans-1,4-configuration (70-75%) with the remaining being 1,2-vinyl. The cis-1,4-configuration observed by IR is minimal (1-5%). By replacing the 2-phenylpheoxo with a 4-alkylphenoxo ligand, the amount of 1,4-configuration slightly increases, resulting in increase in the endothermic melting signal at $-30{\sim}50^{\circ}C$ in the DSC curve. The molecular weights of the polymers are high ($M_n$: 300000~800000) with a fairly narrow molecular weight distribution ($M_w/M_n$, 2.0-2.7).

• Korean Journal of Food Science and Technology
• /
• v.44 no.6
• /
• pp.680-685
• /
• 2012

The effects of chlorophyll (0.33 mg/kg) and ${\beta}$-carotene (3.3, 9.9, 19.8 mg/kg) addition to a mixture of roasted perilla seeds, rice, and water (30:45:225, w/w/w) on the lipid oxidation and tocopherol contents were studied during heating at $100^{\circ}C$ for 120 min to simulate cooking of perilla and rice porridge. Lipid oxidation was evaluated with peroxide values (POV) and conjugated dienoic acid (CDA) values, and chlorophyll, ${\beta}$-carotene, and tocopherols were determined by HPLC, POV, and CDA values were increased during heating, indicating the occurrence of lipid oxidation in the perilla and rice porridge. ${\beta}$-Carotene decreased the POV and CDA values of the samples in a concentration-dependent manner, while the addition of chlorophyll did not affect them. Chlorophyll and ${\beta}$-carotene which were added, and tocopherols naturally present in samples were degraded, following the first order kinetics during heating, and ${\beta}$-carotene protected tocopherols from degradation.

• Korean Journal of Materials Research
• /
• v.26 no.3
• /
• pp.154-159
• /
• 2016

A roll-bonding process was applied to fabricate an AA1050/AZ91/AA1050 laminate complex sheet. Two AA1050 and one AZ91 magnesium sheets of 2 mm thickness, 30 mm width and 200 mm length were stacked up after surface treatment that included degreasing and wire brushing; material was then reduced to a thickness of 3 mm by one-pass cold rolling. The laminate sheet bonded by the rolling was further reduced to 2 mm in thickness by conventional rolling. The rolling was performed at 623K without lubricant using a 2-high mill with a roll diameter of 210 mm. The rolling speed was 15.9 m/min. The AA1050/AZ91/AA1050 laminate complex sheet fabricated by roll bonding was then annealed at 373~573K for 0.5h. The microstructure of the complex sheets was revealed by electron back scatter diffraction (EBSD) measurement; the mechanical properties were investigated by tensile testing and hardness testing. The strength of the complex sheet was found to increase by 11 % and the tensile elongation decreased by 7%, compared to those values of the starting material. In addition, the hardness of the AZ91 Mg region was slightly higher than those of the AA1050 regions. Both AA1050 and AZ91 showed a typical deformation structure in which the grains were elongated in the rolling direction; however, the mis-orientation distribution of grain boundaries varied greatly between the two materials.

• Journal of Korean Society for Quality Management
• /
• v.44 no.1
• /
• pp.95-108
• /
• 2016

Purpose: This study aims to investigate the effect of product creativity on the financial performance of new product in the food industry. In addition, the applicability of creative thinking method for the development of creative new food product is examined. Methods: In this study, OPA(Originality-Practicality Analysis) method is applied to evaluate the creativity of 32 new food products of 'H' food company in Korea. Effects of product creativity on the financial performance are analyzed using t-test and logistic regression analysis. In order to examine the applicability of SIT(Systematic Inventive Thinking) for the new product development process, each subject are classified according to five SIT tools. Results: The product group belongs to creative area(CA) shows the highest financial performance among the quadrants of OPA matrix. The products are divided into two groups whether the product can be classified by SIT tools or not. The products belonged to SIT group show higher creativity than non-SIT group. Conclusion: From the result, it can be concluded that product creativity has effect on the financial performance of the new food products, and SIT can be used as a powerful tool in developing creative new food products.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.9
• /
• pp.753-760
• /
• 2016

This study was undertaken to develop a bed-type cycling system of lower limbs for rehabilitation. This system consists of two modes of cycling: active and passive. Different velocity and loads are provided for improving the muscle function recovery and increasing the muscular strength. To analyze the muscle activity pattern, we measured muscular activity of lower limbs in the rectus femoris (RF), biceps femoris (BF), tibialis anterior (TA), medial gastrocnemius (MG), and soleus (SOL), while cycling in the supine position, and based on the pedaling direction. A total of 18 young and 23 elderly, healthy subjects participated in this study. Muscle activity of MG muscles was significantly different in the two age groups. This study could provide the reference data to develop cycling exercises for lower limbs during rehabilitation of the elderly patients.

• Analytical Science and Technology
• /
• v.32 no.5
• /
• pp.173-184
• /
• 2019

As the size of semiconductors becomes smaller, it is necessary to perform high precision polishing of nanoscale. Ceria, which is generally used as an abrasive, is widely used because of its uniform quality, but its stability is not high because it has a high molecular weight and causes agglomeration and rapid precipitation. Such agglomeration and precipitation causes scratches in the polishing process. Therefore, it is important to accurately analyze the size distribution of ceria particles. In this study, a study was conducted to select dispersants useful for preventing coagulation and sedimentation of ceria. First, a dispersant was synthesized and a ceria slurry was prepared. The defoamer selection experiment was performed in order to remove the air bubbles which may occur in the production of ceria slurry. Dynamic light scattering (DLS) and asymmetrical flow field-flow fractionation (AsFlFFF) were used to determine the size distribution of ceria particles in the slurry. AsFlFFF is a technique for separating nanoparticles based on sequential elution of samples as in chromatography, and is a useful technique for determining the particle size distribution of nanoparticle samples. AsFlFFF was able to confirm the presence of a little quantities of large particles in the vicinity of 300 nm, which DLS can not detect, besides the main distribution in the range of 60-80 nm. AsFlFFF showed better accuracy and precision than DLS for particle size analysis of a little quantities of large particles such as ceria slurry treated in this study.

• Analytical Science and Technology
• /
• v.32 no.3
• /
• pp.77-87
• /
• 2019

High viscosity carbon black dispersions are used in various industrial fields such as color cosmetics, rubber, tire, plastic and color filter ink. However, carbon black particles are unstable to heat due to inherent characteristics, and it is very difficult to keep the quality of the product constant due to agglomeration of particles. In general, particle size analysis is performed by dynamic light scattering (DLS) during the dispersion process in order to select the optimum dispersant in the carbon black dispersion process. However, the existing low viscosity analysis provides reproducible particle distribution analysis results, but it is difficult to select the optimum dispersant because it is difficult to analyze the reproducible particle distribution at high viscosity. In this study, dynamic light scattering (DLS) and asymmetrical flow field-flow fractionation (AsFlFFF) analysis methods were compared for reproducible particle size analysis of high viscosity carbon black. First, the stability of carbon black dispersion was investigated by particle size analysis by DLS and AsFlFFF according to milling time, and the validity of analytical method for the selection of the optimum dispersant useful for carbon black dispersion was confirmed. The correlation between color and particle size of particles in high viscosity carbon black dispersion was investigated by using colorimeter. The particle size distribution from AsFlFFF was consistent with the colorimetric results. As a result, the correlation between AsFlFFF and colorimetric results confirmed the possibility of a strong analytical method for determining the appropriate dispersant and milling time in high viscosity carbon black dispersions. In addition, for nanoparticles with relatively broad particle size distributions such as carbon black, AsFlFFF has been found to provide a more accurate particle size distribution than DLS. This is because AsFlFFF, unlike DLS, can analyze each fraction by separating particles by size.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.2
• /
• pp.329-333
• /
• 2021

V2G (Vehicle to Grid) technology for an EV (Electric Vehicle) has been assumed as so promising in a near future for its useful energy resource concept but still yet to be developed around the world for specific service purposes through various R&BD projects. Basically, V2G returns power stored in vehicle at a cheaper or unused time to the grid at more expensive or highly peaked time, and is accordingly supposed to provide such roles like peak shaving or load levelling according to customer load curve, frequency regulation or ancillary reserves, and balancing power fluctuation to grid from the weather-sensitive renewable sources like wind or solar generations. However, it has recently been debated over its prominent usage as diffusing EVs and the required charging/discharging infrastructure, partially for its addition of EV ownership costs with more frequent charging/discharging events and user inconvenience with a relative long-time participation in the previously engaged V2G program. This study suggests that a Korean DR (Demand Response) service integrated V2G system especially based upon a dynamic charge/pause/discharge scheme newly proposed to ISO/IEC 15118 rev. 2 can deal with these concerns with more profitable business model, while fully making up for the additional component (ex. battery) and service costs. It also indicates that the optimum economic, environmental, and grid impacts can be simulated for this V2G-DR service particularly designed for EV aggregators (V2G service providers) by proposing a specific V2G engagement program for the mediated DR service providers and the distributed EV owners.

• The Korea Journal of Herbology
• /
• v.37 no.1
• /
• pp.51-59
• /
• 2022

Objectives : The process through which mesenchymal cells condense and differentiate into chondrocytes to form new bone is known as endochondral bone formation. Chondrogenic differentiation and hypertrophy are essential steps in bone formation and are influenced by various factors. The stem bark and root bark of Eleutherococcus sessiliflorus (ES) have been widely used to treat growth retardation and arthritis in traditional Korean Medicine. In this study, we aimed to investigate the possible role of the stem bark of ES in the stimulation of chondrogenic differentiation in clonal murine chondrogenic ATDC5 cells. Methods : In ATDC5 cells treated with ES extract, cell viability and extracellular matrix production were determined using CCK-8 assay and Alcian blue staining, respectively, and alkaline phosphatase activity was measured. We also examined mRNA and protein expression levels of genes related to chondrogenic expression in ATDC5 cells using reverse transcription-polymerase chain reaction and western blot analyses. Results : ES extract increased the accumulation of Alcian blue-stained cartilage nodules and alkaline phosphatase activity in ATDC5 cells. It increased the mRNA expressions of chondrogenic markers including bone sialoprotein (BSP), cartilage collagens, Runt-related transcription factor-2 (RUNX-2), osteocalcin (OCN), β-catenin, and bone morphogenetic protein-2 (BMP-2), as well as the protein expressions of β-catenin, RUNX-2, BMP-2, and alkaline phosphatase (ALP). Conclusion : Taken together, these results suggest that ES extract exhibits a chondromodulating activity and therefore may be a possible agent for the treatment of bone growth disorders.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.2
• /
• pp.178-183
• /
• 2022

For enhancing the flame-retardant properties of wallpapers, we developed an organic-inorganic hybrid solution with ZrSiO₄ as a functional ceramic powder, coated on non-woven fabric using dip coating, spray coating, and slot-die coating methods. Their flame retardant properties were characterized by a 45° combustion tester, which is manufactured according to the flame-retardant performance standard (KOFEIS 1001 and KS F 2819). In organic-inorganic hybrid solution, with increasing the concentration of acid-catalyst (acetic acid), the precipitation of ZrSiO₄ powders increased, and the flame retardant properties decreased. The highest flame retardant result was obtained for the solution adding 5 wt% acetic acid. The optimization of the coating method and coating number resulted in the most excellent flame-retardant properties being obtained for the non-woven fabric coated for 5 or 7 times by dip coating method, and their flame-retardant properties corresponded to class 2 flame-retardant performance of wallpapers.