• Journal of Microbiology and Biotechnology
• /
• 제26권10호
• /
• pp.1746-1754
• /
• 2016

Recently, spherical beads entrapping quorum quenching (QQ) bacteria have been reported as effective moving QQ-media for biofouling control in MBRs for wastewater treatment owing to their combined effects of biological (i.e., quorum quenching) and physical washing. Taking into account both the mass transfer of signal molecules through the QQ-medium and collision efficiencies of the QQ-medium against the filtration membranes in a bioreactor, a cylindrical medium (QQ-cylinder) was developed as a new shape of moving QQ-medium. The QQ-cylinders were compared with previous QQ-beads in terms of the QQ activity and the physical washing effect under identical loading volumes of each medium in batch tests. It was found that the QQ activity of a QQ-medium was highly dependent on its specific surface area, regardless of the shape of the medium. In contrast, the physical washing effect of a QQ-medium was greatly affected by its geometric structure. The enhanced anti-biofouling property of the QQ-cylinders relative to QQ-beads was confirmed in a continuous laboratory-scale MBR with a flat-sheet membrane module.

• Bulletin of the Korean Chemical Society
• /
• 제11권6호
• /
• pp.552-557
• /
• 1990

Luminescence quenching reactions of photoexcited tris(2,2'-bipyridine)ruthenium (Ⅱ) complex cation, $Ru(bpy)_3\;^{2+}$, by dialkylviologens (dimethyl, dioctyl, dibenzyl, methyloctyl, methyldodecyl, and methylbenzyl) were studied in sodium dodecylsulfate (SDS), poly(styrenesulfonate) (PSS), and poly(vinylsulfonate) (PVS) solutions. The relative quenching rate varies widely with the microheterogeneous media employed: the highest quenching rate is observed for methyldodecylviologen in homogeneous aqueous medium, dibenzylviologen in SDS and PVS solutions, and dimethylviologen in PSS solution; the lowest rate is found for dimethylviologen in homogeneous medium and SDS solution, methyldodecylviologen in PSS and PVS solutions. These results were interpreted in terms of reduction potential of viologens, affinity of $Ru(bpy)_3\;^{2+}$ and viologens to the microparticles, and the structures of the viologen-colloid complexes.

• Bulletin of the Korean Chemical Society
• /
• 제16권12호
• /
• pp.1184-1189
• /
• 1995

The rapid quenching dynamics of F center excitation by OH- defects in KCl crystals are investigated by monitoring ground state absorption bleach recovery, using a picosecond streak camera absorption spectrometer. F center absorption bleach in OH--doped crystals shows three distinguishable recovery components with the current temporal resolution, designated as slow, medium and fast components. The slow one is due to the normal relaxation process of F* centers as found in OH--free crystals. The others are consequent on energy transfer from electronically excited F centers to OH--vibrational levels. The fast component is a minor energy transfer process and resulting from the relaxation of somewhat distant, not the closest, associated pairs of F* and OH- defects. The energy transfer between widely separated F* and OH- defects opens up a recovery process via the medium component which is assisted by OH- librations, lattice vibrations and OH- dipole reorientations. The quenching behaviors of F* luminescence and photoionization by OH- are explained well by the relaxation process of the medium component.

• Journal of Photoscience
• /
• 제9권3호
• /
• pp.75-79
• /
• 2002

Solubility of carbon tetrachloride ($CCl_4$) in water increases appreciably in presence of $\beta$-cyclodextrin ($\beta$CD). $CCl_4$ is a very good quencher of 1-naphthol (1ROH) fluorescence. By studying the quenching of fluorescence of 1ROH included in $\beta$CD cavity, it was found that there is an increase in the availability of $CCl_4$ around $\beta$CD in the aqueous medium. This could help to rationalize the enhanced solubility of $CCl_4$.

• 오토저널
• /
• 제4권3호
• /
• pp.24-39
• /
• 1982

It has already been known that quenching effect is influenced greatly by stirring and changing coolant's temperature on quenching. But according to the past investigations its effect has not been taken into consideration quantitatively in the cooling process. The purpose of this study is that the influence of flow rate and temperature on the quenching effect of cooling water as quenching medium is quantitatively examined by using the open channel. The stream of water in this study is turbulent flow. The temperature of the specimen made of pure copper is measured by CA thermocouple in the vicinity of the surface and recorded by an automatic recorder during the quenching process in city water. The results obtained are as follows; 1. The quenching effect of cooling water generally increases with Reynolds Number(characteristic length; specimen diameter)as shown in the experimental formula; but at the realm of Reynolds Number from 1.2 * 10$^{4}$ to 9.2 * 10$^{4}$, the increasing rate of quenching effect shows little increase. 2. The increasing rate of quenching effect was increased under the flow rate of 221 cm/sec. On the other hand, it was decreased below this flow rate. 3. The quenching effect was influenced by the water temperature and the flow rate. But it was rather dependent upon the former than the latter. 4. Although the quenching effect appeared loosely in the water temperature of 50.deg. C, it was shown that the quenching effect increased in the low flow rate of 31 cm/sec. comparing with the still water. 5. It is desirable to design the quenching system to be over 1.2 * 10$^{4}$ in Reynolds Number or over, 3000$cm^{-1}$ / in V/v in order to increase the quenching effect of the system using open channel.annel.

• 열처리공학회지
• /
• 제21권3호
• /
• pp.137-143
• /
• 2008

Effect of quenching medium on the mechanical properties of ductil iron GCD 50 has been investigated using ADI treated specimens. The specimens have been austenitized at $900^{\circ}C$ for 2 hours, followed by controlled cooling to $800^{\circ}C$ under the cooling rate of $0.05^{\circ}C/sec$, then austempered at $380^{\circ}C$, $330^{\circ}C$, $280^{\circ}C$ and $230^{\circ}C$ for 1 hour. The specimens treated in the salt of 5% water were found to have higher tensile strength than that of the normal salt bath. Elongation and impact energy increased in proportion to the increase of retained austenite volume fraction. The increase of cooling rate of the salt by the addition of 5% water to the salt resulted in the increase of retained austenite volume fraction and the formation of fine bainitic ferrite.

• 열처리공학회지
• /
• 제3권4호
• /
• pp.10-22
• /
• 1990

A study has been investigated on the effect of mechanical properties (tension strength, rotary bending fatigue strength, wear resistance, hardness) according to the carbide particle size variation by the treatment of 1) quenching tempering, and 2) quenching, subzero treatment and tempering. The material used in this investigation was a typical bearing steel, high C high Cr, AISI E 52100. The result obtained in this study were as follows : (1) Finer the carbide particle size increasing the hardness and retained austenite in same quenching condition. (2) Finer the carbide particle size reduced the tension and rotary bending fatigue which were resulted from austenite grain growth and carbide precipitation on grain boundry that induced by carbide refine heat treatment. (3) Finer the carbide particel size increasing the wear resistance which were resulted by uniform distribution of carbide and increased hardness induced by microstructural uniform hardenability of matrix. (4) When the carbide particles were refinded, subzero treatment is effective only wear resistance and hardness.

• 대한화학회지
• /
• 제8권4호
• /
• pp.158-163
• /
• 1964

10 種의 N,N-dimethylaniline에 對하여 electronic spectra와 消光常數를 결정하였다. DMA의 $250m{\mu}$ (C) banp가 소광의 주원인이 되고 있음을 밝혔고 이 band가 $n{\to}{\pi}^{\ast}$ band임을 치환기 효과와 용매 효과를 通하여 밝힐 수 있었다. 이 band에 依하여 흡수된 energy는 삼중항 상태로 전이되고 결국은 가장 적은 energy의 삼중항 상태, $^{3}La$로 떨어져 여기서 無복사 충돌에 依하여 energy를 상실케된다.

• 한국재료학회지
• /
• 제30권1호
• /
• pp.8-13
• /
• 2020

Effect of heat treatment on microstructure and mechanical properties of an Fe-6.5Mn-0.08C medium-manganese steel is investigated in this study. Three kinds of medium-manganese steel specimens are fabricated by varying heat treatments of intermediate quenching (IQ), step quenching (SQ), and intercritical annealing (IA). Hardness and tensile tests are performed to examine the correlation of microstructure and mechanical properties for the Fe-6.5Mn-0.08C medium-manganese steel specimens. The IQ and SQ specimens have microstructures of martensite matrix with ferrite, whereas IA specimen exhibits microstructure of acicular ferrite matrix with martensite. The tensile test results show that the SQ specimen with martensite matrix has the highest yield strength and the lowest elongation. On the other hand, the SQ specimen has the highest hardness due to the relatively lower reduction of carbon content in martensite during intercritical annealing. According to the fractography of tensile tested specimens, the SQ specimen exhibits a dimple and quasi-cleavage fracture appearance while the IQ and IA specimens have fully ductile fracture appearance with fine-sized dimples caused by microvoid coalescence at ferrite and martensite interface.

• Journal of Microbiology and Biotechnology
• /
• 제27권3호
• /
• pp.552-560
• /
• 2017

Quorum quenching (QQ) bacteria entrapped in a polymeric composite hydrogel (QQ medium) have been successfully applied in membrane bioreactors (MBRs) for effective biofouling control. However, in order to bring QQ technology closer to practice, the physical strength and lifetime of QQ media should be improved. In this study, enforcement of physical strength, as well as an extension of the lifetime of a previously reported QQ bacteria entrapping hollow cylinder (QQ-HC), was sought by adding a dehydration procedure following the cross-linking of the polymeric hydrogel by inorganic compounds like $Ca^{2+}$ and boric acid. Such prepared medium demonstrated enhanced physical strength possibly through an increased degree of physical cross-linking. As a result, a longer lifetime of QQ-HCs was confirmed, which led to improved biofouling mitigation performance of QQ-HC in an MBR. Furthermore, QQ-HCs stored under dehydrated condition showed higher QQ activity when the storage time lasted more than 90 days owing to enhanced cell viability. In addition, the dormant QQ activity after the dehydration step could be easily restored through reactivation with real wastewater, and the reduced weight of the dehydrated media is expected to make handling and transportation of QQ media highly convenient and economical in practice.