• 한국임상수의학회지
• /
• 제22권3호
• /
• pp.244-248
• /
• 2005

This study was conducted to survey the relationship between the somatic cell count (SCC), and California mastitis test (CMT) & mastitis. A total of 328 quarter milk samples were collected from 211 cows suspected to have mastitis; Both SCC and CMT were performed on the samples. Milk smear was stained with Broadhurst and Paley stain and the cells were classified into either epithelial or blood cells. Bacterial isolation was made and antimicrobial susceptibility was tested. Of the 328 quarters, 78 ($23.8{\%}$) were CMT negative with SCC <750,000/ml. As expected, CMT score increased with the increase of SCC. The number of epithelial cells decreased with the increasing number of somatic cells, while the opposite was the case with the number of blood cells. The critical point was when the SCC reached 1,000,000/ml. Up to 1,000,000 cells/ml, the number of epithelial cells was greater than that of blood cells. The results indicate that when epithelia:blood cell ratio is 58.1:41.9, the milking line should be checked and bacterial isolation be performed on the samples in order to identity mastitis.

• 한국환경과학회지
• /
• 제31권5호
• /
• pp.447-456
• /
• 2022

This study was conducted to propose a way to increase the accuracy and precision of 𝛽-ray measurement equipment. Statistical processing results of equivalent evaluation data from 2016 to 2021 confirmed that the concentration of micro dust measured by 𝛽-ray measurement equipment was higher than that of micro dust sampler. According to quarterly data, it was confirmed that the data from the third quarter (July to September) showed a different trend from other periods, which is assumed to be due to weather conditions. This study indicates that automatic micro-dust measurement equipment evaluation at air pollution measuring stations during the third quarter should be excluded. The evaluation cycle should be changed from once every two years to quarterly. In addition, when the criterion for determining equivalence evaluation falls within the range of the slope and intercept values of the existing trend line, it is necessary to evaluate the R² value together and reduce the slope from 0.9-1.1 to 0.9-1.0.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.415-418
• /
• 1995

This paper describes a new technique for thickness measurement of a very thin layer less than one-quarter of the wavelength of ultrasonic wave using ultrasonic pulse-echo method. The technique determines the thickness of a thin layer in a layered medium form the amplitudes of the total reflected waves from the back side layer of interst. Thickness of a very thin layer few inch deep inside the media can be measured without using a very high frequency ultrasonic transducer over 100MHz which must be used in the conventional techniques for the precision measurement of a thin layer. The method also requires no inversion process to extract the thickness from the waveform of the reflected waves, so that it makes possible on-line measurement of the thickness of the layer.

• ETRI Journal
• /
• 제28권1호
• /
• pp.84-86
• /
• 2006

This letter presents a small-sized, high-power single-pole double-throw (SPDT) switch with defected ground structure (DGS) for wireless broadband Internet application. To reduce the circuit size by using a slow-wave characteristic, the DGS is used for the quarter-wave (${\lambda}$/4) transmission line of the switch. To secure a high degree of isolation, the switch with DGS is composed of shunt-connected PIN diodes. It shows an insertion loss of 0.8 dB, an isolation of 50 dB or more, and power capability of at least 50 W at 2.3 GHz. The switch shows very similar performance to the conventional shunt-type switch, but the circuit size is reduced by about 50% simply with the use of DGS patterns.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1103-1107
• /
• 1990

This paper describes a new method of noise-canceling in an instrumentation using a pair of identical Potential Transformers (PT). This method allows us to get reliable signals without any noise, not only on the transmission line, but also on the sensors; even if we do not have a reference noise or a specific noise. In this case "any noise" means normal mode noise (NMN), under a quarter frequency of the switching. We proposed to call this method alternating noise-canceling (ANC). The accuracy of this new method has been verified by experimentations.entations.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.476-481
• /
• 1999

This paper describes a new technique for measurement of the displacement less than one-quarter of the wavelength of ultrasonic wave using ultrasonic pulse-echo method. The technique determines the displacement of a journal bearing from the amplitudes of the total reflected waves from the surface of journal inside the bearing. Vibration of journal bearing can be measured without using a very high frequency ultrasonic transduce over 100MHz which must be used in the conventional techniques for the precision measurement of a small displacement. The method also requires no inversion process to extract the thickness from the waveforms of the reflected waves, so that it makes possible on-line measurement of the vibration of journal bearing.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.968-973
• /
• 2006

Although Gyeonggi-do is the core area which has a quarter of the population of Korea, it has poor railway network and then it have got serious traffic problem. So in this paper, it is introduced the improving methods of railways on Gyeonggi-do. In first, it was showed a fast and effective railway route implementation according to the characteristics with the similar population but the 17 times bigger area than that of Seoul. And it was explained multipurpose using method of the railways of Gyeonggi-do whit subway, commuter, express and high speed train etc. Finally unlike Seoul subway focusing on approachability, it was proposed 'express train paradigm' focusing on implementing the high movability which railways of Gyeonggi-do must have. So with 'Bundang-line' metropolitan railway, the case study in applying to southern metropolitan area with those suggestion was showed.

• 한국산학기술학회논문지
• /
• 제5권5호
• /
• pp.403-408
• /
• 2004

We suggest new attenuator design and formula using quad spiral shaped defected ground structure (DGS). Series resistors and quarter wavelength transmission line that has a role of inverter have been synthesized for attenuator design and novel attenuator structure using quad spiral shaped DGS is fabricated, the measurements show good agreement with theoretical anticipations. The suggested attenuator could remove peak of insertion loss graph through various attenuation method. The various attenuations are obtained by attached pin-diodes, 10-15dB attenuation leveling is realized for validity of suggested design.

• 한국통신학회논문지
• /
• 제37권8C호
• /
• pp.637-644
• /
• 2012

본 논문에서는 새로운 소형 전력 분배기를 제안한다. 기존의 Wilkinson 전력 분배기에서 ${\lambda}/4$ 길이의 분기선로 대신 ${\lambda}/12$ 길이의 CRLH 전송선 0차 공진 대역통과 여파기를 사용하여 전체구조의 물리적 크기를 줄였다. 분기 선로의 위상을 만족하면서 원하는 주파수를 중심으로 대역을 형성하고 전력 분배가 이뤄지는 기능을 가진다. 설계방법의 타당성 확인을 위해 군위성 통신 시스템의 L-대역을 적용예로 선택하여 등가 모델과 3차원 모의실험의 성능과 함께 분산도와 ZOR 전계분포로써 CRLH의 특성이 제시된다. 모의실험 결과는 측정결과와 비교하였으며 제안기법의 소형화 효과가 논의된다.

• 한국시뮬레이션학회논문지
• /
• 제16권2호
• /
• pp.65-74
• /
• 2007

가상생산기술은 신제품의 개발, 새로운 장비 개발 및 새로운 제조시스템 개발에 유용한 도구이며, 특히 3D 시뮬레이션 기술은 가상생산의 핵심기술이다. 3D 시뮬레이션 기술은 기계적 시뮬레이션 기술과 이산사건 시뮬레이션 기술로 구분할 수 있다. 본 논문에서는 휴대폰 카메라에 장착되는 렌즈모듈 조립을 생산하는 국내 회사의 사례를 소개한다. 이 회사에서는 렌즈모듈 조립공정을 현재 수작업으로 하고 있는데 자동화시스템을 개발하기로 결정하였으며 이를 위해 3D 시뮬레이션 기술을 도입하기로 하였다. 3D 시뮬레이션 기술은 시스템 개념설계단계에서부터 적용이 되었는데, 단위 장비 개발을 위해서는 $CATIA^{(R)}$와 $IGRIP^{(R)}$이 활용되었으며, 시스템 설계를 위해서는 이산사건 시뮬레이션 도구인 $QUEST^{(R)}$가 활용되었다. 논문의 목적은 새로운 자동화 설비의 기술적. 경제적 타당성을 검증하는 것이다. 개발결과 takt time 이 기존의 수작업에 비해 4분의 1 수준으로 감소되었으며, 이에 따른 작업자 인원도 대폭 감소되었다.