• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.436-437
• /
• 2010

전력전자공학의 목적은 전자적인 스위치를 이용하여 전력을 원하는 대로 변환하는 것이다. 전력전자시스템을 제어하려면 스위치 동작과 교류회로의 동적특성을 이해해야 한다. 본 논문에서는 전력전자의 핵심이 되는 기술사상(技術思想)을 다음 2가지로 정리하였다. 1) 모든 전자 스위치는 등가적으로 정확히 시변 선형 또는 비선형 전자변압기다. 2) 모든 교류회로의 정적 또는 동적 특성은 페이저변환으로 해석가능하다. 이번 논문에서 일반화된 전자변압기 모델을 제시하고, 단상 및 다상을 통합하고 D-Q회로변환과 양자회로변환(quantum circuit transformation)을 모두 포용하는 일반화된 페이저변환을 제시한다.

• 반도체디스플레이기술학회지
• /
• 제19권3호
• /
• pp.73-76
• /
• 2020

The physics-based compact gate leakage current noise models in nanoscale MOSFETs are developed in such a way that the models incorporate important physical effects and are suitable for circuit simulators, including QM (quantum-mechanical) effects. An emphasis on the trap-related parameters of noise models is laid to make the models adaptable to the variations in different process technologies and to make its parameters easily extractable from measured data. With the help of an accurate and generally applicable compact noise models, the compact noise models are successfully implemented into BSIM (Berkeley Short-channel IGFET Model) format. It is shown that the noise models have good agreement with measurements over the frequency, gate-source and drain-source bias ranges.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.368-370
• /
• 1995

A new three-level push-pull type quantum series resonant rectifier for the power factor correction is proposed. The proposed single phase rectifier enables a zero-current switching operation of all the power devices allowing the circuit to operate at high switching frequencies and high power levels. With the proposed control technique, an unity power factor and greatly reduced line current harmonics can be obtained.

• 반도체디스플레이기술학회지
• /
• 제16권2호
• /
• pp.15-18
• /
• 2017

In this study, we have studied the characteristics of the organic photodiode varying due to the blending conditions of the quantum dots (QDs). The active layer of the photodiode was formed with poly (3-hexylthiophene) and phenyl-C61-butyric acid methyl ester, and CdSe QDs with and without ZnS shell were blended in the active layer. The photodiode with CdSe/ZnS QDs showed the highest power conversion efficiency (PCE) and short-circuit current (Jsc). The performance change of the organic photodiode by X-ray irradiation was also measured. Regardless of X-ray irradiation conditions, the photodiode with CdSe/ZnS QDs showed better stability than other cases.

• Progress in Superconductivity
• /
• 제6권1호
• /
• pp.7-12
• /
• 2004

Due to the very fast switching speed of Josephson junctions, superconductive digital circuit has been a very good candidate fur future electronic devices. High-speed and Low-power microprocessor can be developed with Josephson junctions. As a part of an effort to develop superconductive microprocessor, we have designed an RSFQ 4-bit ALU (Arithmetic Logic Unit) in a pipelined structure. To make the circuit work faster, we used a forward clocking scheme. This required a careful design of timing between clock and data pulses in ALU. The RSFQ 1-bit block of ALU used in this work consisted of three DC current driven SFQ switches and a half-adder. We successfully tested the half adder cell at clock frequency up to 20 GHz. The switches were commutating output ports of the half adder to produce AND, OR, XOR, or ADD functions. For a high-speed test, we attached switches at the input ports to control the high-speed input data by low-frequency pattern generators. The output in this measurement was an eye-diagram. Using this setup, 1-bit block of ALU was successfully tested up to 40 GHz. An RSFQ 4-bit ALU was fabricated and tested. The circuit worked at 5 GHz. The circuit size of the 4-bit ALU was 3 mm ${\times}$ 1.5 mm, fitting in a 5 mm ${\times}$ 5 mm chip.

• 대한기계학회논문집A
• /
• 제38권12호
• /
• pp.1421-1426
• /
• 2014

소듐냉각고속로(Sodium-cooled Fast Reactor, SFR)의 안전성 향상을 위해 고온 증기 Rankine 싸이클 대신 초임계 이산화탄소(Supercritical $CO_2$, $S-CO_2$) Brayton 싸이클을 전력변환 시스템에 사용하는 방안이 제시되고 있다. 이 경우, 중간 열교환기로는 확산 접합(Diffusion Bonding)에 의해 제작되는 미소채널형 열교환기인 PCHE(Printed Circuit Heat Exchanger)가 고려되고 있다. 따라서 본 연구에서는 PCHE 형 열교환기 후보재료인 다양한 오스테나이트계 합금의 확산접합 특성을 평가하였다. 후보재료별로 다양한 조건에서 확산접합부를 제작하고 상온에서 $650^{\circ}C$까지의 인장 특성을 평가하였다. 평가 결과 SS 316H와 SS 347H는 $550^{\circ}C$까지 모재와 유사한 특성을 보였지만 Fe-Ni-Cr 합금인 Incoloy 800HT는 모든 온도에서 인장특성이 감소하였다. 연신율 저하의 원인을 이해하기 위해 접합부 부근의 미세조직을 분석하였다.

• Progress in Superconductivity
• /
• 제3권2호
• /
• pp.172-177
• /
• 2002

Superconductive digital to analog converters (DAC) based on Josephson effect produce the voltage steps with high precision and good stability Therefore, they can be applied to obtain a very accurate ac voltage standard. In this paper, we made a simulation study of Rapid Single Flux Quantum (RSFQ) DAC. RSFQ DAC was composed of Non-destructive Head Out (NDRO) cells, T flip-flops, D flip-flops, Splitters, and Confluence Buffers. Confluence Buffer was used in resetting the DACs. We also obtained operating margins of the important circuit parameters in simulations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2300-2302
• /
• 2005

Metal-Semiconductor-Metal type photodetector was fabricated with AlGaAs/InGaAs Quantum Well FET structures using simplified processing steps. The DC and RF responses were measured by 850nm wavelength injection laser. A DC responsivity in the quasisaturated regime was 0.45 A/W in CW measurements, and a bandwidth measured using a 850nm 40 ps pulsed laser was 16GHz. An electrical equivalent circuit model was extracted from measured S-parameter.

• Progress in Superconductivity
• /
• 제5권1호
• /
• pp.21-25
• /
• 2003

We have designed and simulated an 1-bit ALU (Arithmetic Logic Unit) by using a half adder. An ALU is the part of a computer processor that carries out arithmetic and logic operations on the operands in computer instruction words. The designed ALU had limited operation functions of OR, AND, XOR, and ADD. It had a pipeline structure. We constructed an 1-bit ALU by using only one half adder and three control switches. We designed the control switches in two ways, dc switch and NDRO (Non Destructive Read Out) switch. We used dc switches because they were simple to use. NDRO pulse switches were used because they can be easily controlled by control signals of SET and RESET and show fast response time. The simulation results showed that designed circuits operate correctly and the circuit minimum margins were ＋/-27%. In this work, we used simulation tools of XIC and WRSPICE. The circuit layouts were also performed. The circuits are being fabricated.

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권1호
• /
• pp.17-20
• /
• 2005

We has designed, fabricated, and measured a Single flux quantum (SFQ) toggle flip-flop (TFF). The TFF is widely used in superconductive digital electronics circuits. Many digital devices, such as frequency counter, counting ADC and program counter be used TFF Specially, a program counter may be constructed based on TFF We have designed the newly TFF and obtained high bias margins on test. In this work, we used two circuit simulation tools, WRspice and Julia, as circuit optimization tools. We used XIC for a layout tool. Newly designed TFF had minimum bias margins of +/- $37\%$ and maximum bias margins of +/-$37\%$(enhanced from +/- $37\%$). The designed circuits were fabricated by using Nb technology The test results showed that the re-optimized TFF operated correctly on 100kHz and had a very wide bias margins of +/- $53\%$.