• 제목/요약/키워드: Quantity Limitation

검색결과 108건 처리시간 0.024초

IFC활용 BIM기반 공정/원가 통합관리 프레임워크 (A Framework Integrating Cost and Schedule based on BIM using IFC)

  • 이진강;이현수;박문서;정민혁
    • 한국건설관리학회논문집
    • /
    • 제14권3호
    • /
    • pp.53-64
    • /
    • 2013
  • 건설프로젝트 관리 과정에는 수많은 정보가 존재한다. BIM(Building Information Modelling)은 정보전달의 매개체로써 공정 및 원가 정보를 관리하여 4D(3D+Time), 5D(4D+Cost) 시뮬레이션 등 다양한 이익을 얻을 것으로 예상되었다. 그러나 BIM 활용과정에 따른 정보의 연계 문제, BIM 객체기반 공정/원가 정보의 한계, BIM 소프트웨어 호환성 문제 등으로 인해 BIM을 활용한 공정 및 원가정보의 관리는 적극적으로 활용되지 못하고 있다. 이에 본 연구에서는 위의 문제점들을 개선하고자 IFC(Industry Foundation Classes)활용 BIM기반 공정/원가 통합관리 프레임워크를 제안하였다. 먼저, 정보 입력 문제와 정보 표현의 한계점을 개선하기 위해 공간을 최소단위로 공정 및 원가정보를 통합 관리하는 데이터베이스를 구축하고, 데이터 호환성 문제를 해결하기 위해 국제 표준 데이터 포맷인 IFC를 활용하여 앞서 구축한 데이터베이스의 정보와 BIM 소프트웨어를 연계하여 BIM을 기반으로 한 공정/원가 정보의 통합관리를 시도하였다. 이는 BIM기반 공정/원가 통합관리를 위한 정보 처리 프로세스의 기초를 제공하며, 정보 요구에 대한 정확한 이해를 도와 의사소통의 정확성을 향상시켜 BIM기반 공정/원가관리의 효율성을 높일 것으로 예상된다.

Non Breathe Hold Technique를 이용한 MR 담도계조영술에 대한 고찰 : Prospective Acquisition Correction(PACE)기법과 Respiration Trigger Gating(RTG) 기법의 비교 (A Study on MR Cholangiography using Breathing Hold Target Techniqu by Prospective Acquisition Correction and Respiration Trigger Gating)

  • 구은희;정홍량;임청환;권대철;조정근;이만구
    • 대한디지털의료영상학회논문지
    • /
    • 제10권1호
    • /
    • pp.45-50
    • /
    • 2008
  • Recently, MR Cholangiography used mainly bu controlling of patient's breathing. There is breathing hold techniques to get images within shopt time and gating technique adjusted to respiration cycle for high resolution image. In this study, the aim of this experiment is to know on clinical usefulness compared with PACE and RTG thchniques. This study's period is from 2006 in November to 2007 in January. A total of 21 patients investigated at MAGNETOM Sonata 1.5T (SIEMENS Erlangen) with use of 12ch body coil. MR acquisition protocol used 3D turbo spin echo coronal sequence. Scan parameters applied to potimal setting in use as gating techniques, respectively. Analysis of consuming timing evaluated with rapidness. As analysis of quantity, the common bile duct, gall bladder measured in signal intensities, then these data were calculated by signal to noise ratio and contrast to noise ratio. Qualitative analysis, experienced 2radiologists and 3 RTs were evaluated into 3groups about artifact, accuracy of lesions, sharpness of the common bile duct or gall bladder. As a result of analysis, when compared to PACE, consuming time of the RTG took less than PACE, On both CNRs and SNRs, PACE technique was slightly high values than RTG(p<0.05). Qualitative analysis' results, discrimination of lesions in the common bile duct, gall bladder get a significance level in both RTG and PACE techniques but presence's artifact of breathing and pulsation highly demonstrate in PACE techniques. In conclusion, both PACE and RTG methods at MRCP provided prominently clinical information for the common bile duct, gall bladder. If machines have not limitation with performance, induction of breathing holding also will help getting diagnistic quality.

  • PDF

식재료 아웃소싱이 경제적 주방에 미치는 영향에 관한 연구 - 특1급호텔 양식조리를 중심으로 - (Study on economic effects of outsourcing of food materials on the hotel kitchen - Focus on cooking Western food in the first class hotel -)

  • 성태종
    • 한국관광식음료학회지:관광식음료경영연구
    • /
    • 제13권2호
    • /
    • pp.45-69
    • /
    • 2002
  • This study is designed to examine feasibility and limitation of outsourcing in cooking Western food in a hotel, to interpret importance of outsourcing(eg. outside order, outside procurement, outside supply) in a broad sense in order to reinforce the core capacity in the cooking department, and to know whether the cooking human power is efficiently used and how much the chefs recognize outsourcing of food materials. As many companies conduct restructuring to cut down its size, the reduction of human power led the Western food cooking in the hotel to lower core capacities, lower quality, and lower efficiency. In addition, the sagging morale of chefs undermined creativity. To change from the traditional kitchen to an economic kitchen needs to look into importance of outsourcing, cognitive attitude of chefs, relation with outside suppliers. Here suggests performance of positive changes in the structure The study examined feasibility and limitation of outsourcing in the hotel kitchen as well as chefs' cognitive attitude toward outsourcing of food materials to reinforce core capabilities of the hotel kitchen. 1. Companies of outsourcing are selected according to variability of price conditions, flexibility of contract conditions, popularity of the outsourcing company, and reputation of the outsourcing company. 2. The importance of outsourcing in the Western food cooking is divided into 4 factors such as standard of selecting outsourcing companies, policies of cooking manu, quality of cooking, and quantity of cooking. 3. The most feasible section in outsourcing of food materials is a process of kneading flour for bread, which shows that many Western-food chefs expect to put higher possibility of outsourcing on the kneading. In other words, when it comes to confectionery and bakery, there are many outside expert processing companies supplying high quality products. In the order of outsourcing feasibility, sauce is followed by processed vegetable, garnish of main dish, and soup. The least feasible section in outsourcing of food materials is appetize. Appetize includes a concept of a improvised dish and needs speed. Due to its color, freshness, and sensibility of taste, the appetize plays a key role in the Western food cooking. 4. When outsourcing is taken in place, the highest risk is to lower the inner cooking skills. Therefore chefs in charge of the Western food sequently recognize both internal problems including storage of cooking skills, unstability of layoffs, and loss of cooperation between departments, and external problems including inferior goods, difficulty of differentiating manu, delay of delivery, and expiration date. It shows that most of the Western food chefs consider risks of the internal problems at first. 5. A effective outsourcing needs appropriate selection of outsourcing companies, maintenance of credibility, active communication, check and management of hygiene. However regardless of their position or career, chefs in charge of the Western food have the same cognitive attitude toward selecting successful outsourcing companies after the outsourcing system is enforced. The core of cooking, or a final stage in the full process of so-called artistic cooking, should be treated with insourcing. Reduction of several cooking processes resulted in shortened cooking time, increased efficiency, faster cooking, cutting the waiting-lines, and finally more room for customers. The outsourcing system can reduce or eliminate the following processes in cooking: buying various food materials, checking, storing, preparing, and processing. Especially in the Western food cooking department of a hotel, the outsourcing system should be enforced to make an economic kitchen and to efficiently manage it. Wow it's time to change from the traditional kitchen to an economic kitchen in the hotel cooking department. For that, the cooking department should become a small but strong organization by outsourcing except its core work.

  • PDF

도입주체에 따른 인터넷경로의 도입효과 (The Impact of the Internet Channel Introduction Depending on the Ownership of the Internet Channel)

  • 유원상
    • 마케팅과학연구
    • /
    • 제19권1호
    • /
    • pp.37-46
    • /
    • 2009
  • The Census Bureau of the Department of Commerce announced in May 2008 that U.S. retail e-commerce sales for 2006 reached $ 107 billion, up from $ 87 billion in 2005 - an increase of 22 percent. From 2001 to 2006, retail e-sales increased at an average annual growth rate of 25.4 percent. The explosive growth of E-Commerce has caused profound changes in marketing channel relationships and structures in many industries. Despite the great potential implications for both academicians and practitioners, there still exists a great deal of uncertainty about the impact of the Internet channel introduction on distribution channel management. The purpose of this study is to investigate how the ownership of the new Internet channel affects the existing channel members and consumers. To explore the above research questions, this study conducts well-controlled mathematical experiments to isolate the impact of the Internet channel by comparing before and after the Internet channel entry. The model consists of a monopolist manufacturer selling its product through a channel system including one independent physical store before the entry of an Internet store. The addition of the Internet store to this channel system results in a mixed channel comprised of two different types of channels. The new Internet store can be launched by the independent physical store such as Bestbuy. In this case, the physical retailer coordinates the two types of stores to maximize the joint profits from the two stores. The Internet store also can be introduced by an independent Internet retailer such as Amazon. In this case, a retail level competition occurs between the two types of stores. Although the manufacturer sells only one product, consumers view each product-outlet pair as a unique offering. Thus, the introduction of the Internet channel provides two product offerings for consumers. The channel structures analyzed in this study are illustrated in Fig.1. It is assumed that the manufacturer plays as a Stackelberg leader maximizing its own profits with the foresight of the independent retailer's optimal responses as typically assumed in previous analytical channel studies. As a Stackelberg follower, the independent physical retailer or independent Internet retailer maximizes its own profits, conditional on the manufacturer's wholesale price. The price competition between two the independent retailers is assumed to be a Bertrand Nash game. For simplicity, the marginal cost is set at zero, as typically assumed in this type of study. In order to explore the research questions above, this study develops a game theoretic model that possesses the following three key characteristics. First, the model explicitly captures the fact that an Internet channel and a physical store exist in two independent dimensions (one in physical space and the other in cyber space). This enables this model to demonstrate that the effect of adding an Internet store is different from that of adding another physical store. Second, the model reflects the fact that consumers are heterogeneous in their preferences for using a physical store and for using an Internet channel. Third, the model captures the vertical strategic interactions between an upstream manufacturer and a downstream retailer, making it possible to analyze the channel structure issues discussed in this paper. Although numerous previous models capture this vertical dimension of marketing channels, none simultaneously incorporates the three characteristics reflected in this model. The analysis results are summarized in Table 1. When the new Internet channel is introduced by the existing physical retailer and the retailer coordinates both types of stores to maximize the joint profits from the both stores, retail prices increase due to a combination of the coordination of the retail prices and the wider market coverage. The quantity sold does not significantly increase despite the wider market coverage, because the excessively high retail prices alleviate the market coverage effect to a degree. Interestingly, the coordinated total retail profits are lower than the combined retail profits of two competing independent retailers. This implies that when a physical retailer opens an Internet channel, the retailers could be better off managing the two channels separately rather than coordinating them, unless they have the foresight of the manufacturer's pricing behavior. It is also found that the introduction of an Internet channel affects the power balance of the channel. The retail competition is strong when an independent Internet store joins a channel with an independent physical retailer. This implies that each retailer in this structure has weak channel power. Due to intense retail competition, the manufacturer uses its channel power to increase its wholesale price to extract more profits from the total channel profit. However, the retailers cannot increase retail prices accordingly because of the intense retail level competition, leading to lower channel power. In this case, consumer welfare increases due to the wider market coverage and lower retail prices caused by the retail competition. The model employed for this study is not designed to capture all the characteristics of the Internet channel. The theoretical model in this study can also be applied for any stores that are not geographically constrained such as TV home shopping or catalog sales via mail. The reasons the model in this study is names as "Internet" are as follows: first, the most representative example of the stores that are not geographically constrained is the Internet. Second, catalog sales usually determine the target markets using the pre-specified mailing lists. In this aspect, the model used in this study is closer to the Internet than catalog sales. However, it would be a desirable future research direction to mathematically and theoretically distinguish the core differences among the stores that are not geographically constrained. The model is simplified by a set of assumptions to obtain mathematical traceability. First, this study assumes the price is the only strategic tool for competition. In the real world, however, various marketing variables can be used for competition. Therefore, a more realistic model can be designed if a model incorporates other various marketing variables such as service levels or operation costs. Second, this study assumes the market with one monopoly manufacturer. Therefore, the results from this study should be carefully interpreted considering this limitation. Future research could extend this limitation by introducing manufacturer level competition. Finally, some of the results are drawn from the assumption that the monopoly manufacturer is the Stackelberg leader. Although this is a standard assumption among game theoretic studies of this kind, we could gain deeper understanding and generalize our findings beyond this assumption if the model is analyzed by different game rules.

  • PDF

온라인 상품 판매 성과에 영향을 미치는 상품 소개글 효과 측정 기법 (Measuring the Economic Impact of Item Descriptions on Sales Performance)

  • 이동원;박성혁;문송천
    • 지능정보연구
    • /
    • 제18권4호
    • /
    • pp.1-17
    • /
    • 2012
  • 온라인 상에서 판매되는 상품은 매우 다양하지만, 소비자에게 판매 가격을 제시하거나 소개글을 통해서 상품에 대한 구체적인 설명을 제공한다는 점은 모든 상품에 있어서 가장 기본이 되는 공통적인 특징이다. 만약, 상품의 실제 품질이나 가격과는 독립적으로 상품 소개글이 판매에 미치는 영향력을 파악할 수 있다면 어떠한 소개글이 상품의 판매를 촉진하는 측면에서 더 좋은 글인지 분별할 수 있게 된다. 이런 관점에서 본 연구는 상품 소개글과 판매 성과의 관계를 파악하기 위한 목적으로 수행되었으며, 구체적으로는 온라인 시장에서 한글로 작성된 상품 소개글에 쓰인 각각의 표현 별로 소비자가 구매를 결정하는 데에 어떤 영향을 미치는지를 분석하고자 하였다. 한글 형태소 분석기를 사용하여 국내 앱 시장에서 수집된 앱 소개글 및 판매이력 데이터로부터 상품을 설명하는 주요 속성과 그 속성에 대한 평가를 추출하였으며, 추출된 키워드를 입력 변수로 구성한 계량경제학 모형을 구축하였고, 구체적으로 특정 표현들이 판매 성과에 미치는 영향을 구축된 모형을 사용하여 계량적으로 측정하였다. 앱의 카테고리 별로 표현의 종류가 상이하게 나타남이 관찰됨에 따라, 분석은 각 카테고리 별로 수행되었다. 유료 앱과 무료 앱에 대해서 데이터 분석을 수행한 결과, 판매 성과에 영향을 미치는 '속성과 평가' 키워드를 그 영향력의 크기 별로 파악할 수 있었으며, 특히 무료 앱의 경우는 무료로 이용할 수 있음에도 불구하고 품질이 좋다는 것을 강조했을 때 판매량을 더 높일 수 있다는 것이 확인되었다. 본 연구는 모바일 앱에 대해 수행되었으나, 온라인에서 거래되는 다양한 상품에 대해서도 소개글이 판매 성과에 미치는 영향을 분석할 수 있는 모형으로 활용될 수 있다. 마지막 장에서는 기업의 마케팅 매니저가 본 연구에서 제시하는 연구 방법론과 분석 결과를 활용할 수 있는 방안을 제시하였다.

GIS를 이용한 태양광시설 설치를 위한 적정지역 선정에 관한 연구 (A Study for Planning Optimal Location of Solar Photovoltaic Facilities using GIS)

  • 윤성욱;백이;장재경;최덕규;강동현;손진관;박민정;강석원;권진경
    • 생물환경조절학회지
    • /
    • 제28권3호
    • /
    • pp.243-254
    • /
    • 2019
  • 본 연구에서는 전국을 대상으로 태양광에너지와 관련된 기상 및 지형 대리변수를 고려하여 태양광발전 시설에 대한 취약지역을 분석하였으며, GIS를 이용하여 공간분석을 통해 태양광발전 시설의 적정입지에 대한 평가용 지도를 개발하였다. 본 연구에서 최종적으로 개발된 태양광발전 시설에 대한 취약지도에서는 '취약단계 5(매우 취약)' 지역과 '취약단계 1(매우좋음)' 지역은 나타나지 않았다. '취약단계 4(취약)' 지역은 전라남도가 가장 크게 나타났으며, '취약단계3(보통)' 지역은 광주광역시, 전라북도, 충청북도 및 강원도 등 다수의 행정구역에서 높은 것으로 나타났다. '취약단계 2(좋음)' 지역은 대구광역시, 울산광역시 및 인천광역시 등이 높은 것으로 나타났다. 현재 운영되고 있는 태양광발전소 30곳을 비교 검토한 결과, 대부분 취약단계 2 및 3단계 지역에 위치하며, 상대적으로 태양광에너지가 적합한 지역에 위치함을 나타냈다. 하지만 본 연구의 한계점인 태양광발전소의 제한적인 자료량으로 인해 본 연구결과의 정확성을 명확하게 평가하기는 어렵다. 그럼에도 불구하고 본 연구에서는 GIS 공간분석 기법을 이용하여 다양한 기상 및 지형요소들을 고려하여 전국을 대상으로 태양광발전시설에 대한 취약지도 평가를 시도하였으며, 국내 전 지역에 대한 자료를 제시함으로써 태양광발전과 관련된 부분에 기초자료로 활용할 수 있을 것이다.

기계학습을 이용한 단일 관련자극 P300기반 숨김정보검사 (One-probe P300 based concealed information test with machine learning)

  • 김혁;김현택
    • 인지과학
    • /
    • 제35권1호
    • /
    • pp.49-95
    • /
    • 2024
  • 국내 형사소송절차에서 진술의 진위여부 확인을 위해 사용하는 도구는 폴리그래프검사, 진술타당도분석, P300 기반 숨김정보검사 등이 있고, 이 중에서 폴리그래프검사의 사용빈도가 다른 도구들에 비하여 높다. 하지만, 검사결과를 뒷받침해 줄 수 있는 근거의 부족으로 인하여 재판과정에서 증거채택 가능성이 낮다. 폴리그래프검사를 뒷받침해 줄 수 있는 방법으로, 사전연구가 풍부한 P300기반 숨김정보검사가 주목을 받아 왔지만, 기존의 검사기법은 두 가지 제한점이 있어 실제 사건에서의 활용도는 낮은 편이다. 첫째, 검사에 필요한 관련자극만 3개 또는 6개 등, 사전에 노출되지 않은 정보가 다수 필요하기 때문에 실제 사건에서 사용 가능성이 낮다. 둘째, 기존의 P300기반 숨김정보검사 프로토콜에서는 관련자극과 무관련자극에 대한 P300요소 전위값을 명확하게 구분하기 위하여 오드볼패러다임을 사용하기 때문에 무관련자극에 대한 P300요소 전위값이 과소 추정될 가능성이 있다. 본 연구에서는 검사의 사용 가능성을 높이기 위하여 사전에 노출되지 않은 정보가 단 하나만 있어도 검사가 가능한 단일 관련자극을 사용하는 수정된 P300기반 숨김정보검사 프로토콜을 탐색하였고, 오드볼패러다임 사용으로 인한 무관련자극에 대한 P300요소 전위값이 과소 추정되는 문제를 보완하기 위하여 다양한 기계학습의 분류 알고리즘을 비교하였다. 연구결과 단일 관련자극으로 여성과 남성의 얼굴자극을 사용할 경우, 자극은 400ms 지속시간으로 60회 제시하고, 절단값을 유죄집단은 90%로 무죄집단은 30%로 하여 정점-정점 방법으로 P300요소 전위값을 분석하는 것이 적합함을 확인하였다. 단어자극의 경우, 지속시간을 300ms로 60회 제시하고, P300요소 전위값 분석방법은 얼굴자극과 동일하게 시행하는 것이 적합하다는 것을 확인하였다. 또한 관련자극과 무관련자극에 대한 정점-정점 P300요소 전위값을 6가지 기계학습 분류 알고리즘을 사용하여 분석한 결과, 로지스틱 회귀(LR), 선형 판별 분석(LDA), K-최근접 이웃(KNN) 알고리즘이 관련자극과 무관련자극의 분류에 적합하다는 것을 확인하였다.

국산 유용 수종재의 인공건조 특성에 관한 연구 (Studies on the Kiln Drying Characteristics of Several Commercial Woods of Korea)

  • 정병재
    • Journal of the Korean Wood Science and Technology
    • /
    • 제2권2호
    • /
    • pp.8-12
    • /
    • 1974
  • 한국의 목재 인공 건조법을 개발하기 위하여 필자의 전직 대학인 전북대학교 전 김두헌 총장님, 동농대전 백남혁학장 및 동농대교수 제위의 각별한 협조를 얻어 1956년 고액을 지불하고 미국 More Dry Kiln Co.에서 최신의 목재 인공 건조 장치를 도입하여 전북 농대 임학과에 설치하게된 것이다. 그러나 이 건조 시설을 활용하는데는 많은 지장이 있었으므로 1959년 전기 More Dry Kiln의 온, 습도 조절장치만을 이용한 소형 Dry kiln을 제작하여 본 시험을 실시한 것이다. 공시수종은 소나무, 낙엽송, 은행나무, 전나무, 밤나무 및 감나무등이며, 공시목의 크기는 것이 60cm, 넓이 10cm 및 두께 15-35mm이다. 실험한 건조 조건은 건조 온도를 일정히 ($170^{\circ}F$)하고, 관계습도를 각종으로 변화할때 얻어지는 건조 속도를 측정하는 동시에 각 건조조건에 의하여 유발되는 건조결함을 조사하여 공시목의 초기 함수율과 건조 최경함수율 특히 shell의 함수율과의 비가 이들의 결함 형성 특히 표면경화(casehardening) 형성에 미치는 영향을 구명하였으며 또한 casehardening 계산식을 유도하였다. 1. 목재내부에 형성된 응력 즉 prong이 개주할 때의 응력은 prong이 서로 접합할 때의 응력을 100으로 하는 백분율에 의하여 다음식으로 표시할 수 있다. 단, 응력 측정에 사용한 prong은 그림 1과 같이 작성하여야 한다. $CH=\frac{(A-B') (4W+A) (4W-A)}{2A[(2W+(A-B')][2W-(A-B')]}{\times}100%$ 상식은 다음과 같은 간이식을 사용할 수 있다. $CH=\frac{A-B'}{A}{\times}200%$ 2. 일정 한 건조 조건하에 건조하여 항중에 달하고, 또한 normal casehardening을 형성하는 경우에 는, 그 sample board의 shell 의 함수율은 특히 얇은 sample board에 있어서 US Dep. Agr., Forest Products Laboratory에서 발표한 EMC 보다 낮다. 3. 본 실험에서 측정한 1시간당 목재 건조 표면적 $1cm^2$ 당 증발하는 증발량 즉 건조속도를 비교 검토한 결과 다음과 같은 순위로 되었으며, 비교 검토한 5수 종중 최대치를 유하는 은행나무 MC 20% 에 있어서 최저치를 표시한 밤나무의 3.8배가 된다. (표 1 참조) (1) 은행나무 (2) 감나무 (3) 소나무 (4) 낙엽송 (5) 밤나무 특히 함수율 26% 이하에 있어서 각 함수율에 대한 증발속도치는 다음과 같은 일차식으로 표시 할 수 있으며, 그 회귀계수 유의성 검정에 있어서의 T치는 다음과 같이 각각 고율의 유의성을 표시하였다. (표2 참조) 상기중 Y는 증발속도($g/cm^2hr$.), X는 함수율을 각각표시한다. 이들 회귀직선을 도시하면 그림 2와 같다. 4. 초기함수율과 건조 최종기에 있어서의 목재의 표층 함수율 즉 shell의 함수율과의 비(SR)가 casehar dening 형성에 미치는 영향은 다음과 같다. 어떤 SR 값에 관하여 그 SR 값 이하를 유하는 총개제수(N) 중 CH 제4급이 출현하는 수(D)의 확율 즉 N에 대한 D의 출현확율 P%는 표 3과 같다. (D의 출현확율 P%를 위험확율이라고 가칭한다.) 표 4에 있어서 종란의 1,2,3의 숫자는 각각 다음과 같은 사항을 표시한다. (1) CH 값 제 4급이 출현하지 아니 하는 안전한 최소 SF 값 (2) 위험을 30%를 허용하는 경우에 있어서의 SF 값의 한계 (3) CH 값 제 4급 이하가 발생하지 아니하는 위험율 100%의 값의 범위 상기한 실측 결과에 의하여 밤나무, 낙엽송등은 내부응력 형성이 용이한데 비하여 감나무, 소나무등은 내부응력 형성이 용이하지 아니하여, 특히 전나무, 은행나무등은 타수종과 동일한 건조조건에 있어서 reverse casehardening을 초래함에 비추워 타수종에 비하여 현저히 내부응력 특히 normal casehardening이 잘 형성되지 아니한다는 것을 알 수 있다. 5. casehardening을 제외한 각종의 drying defects는 long time loading에 있어서 그 내부응력이 ultimate stress를 초과할 때 나타나는 것인데 건조조건 온도 $170^{\circ}F$에 대하여 습도를 낮게하여도 그렇게 심하지 아니하나, 온도 $200^{\circ}CF$의 저습에 있어서 end coating을 하지 아니하는 경우에는 용이하게 발생한다. 특히 밤나무는 실험한 타수종에 비하여 casehardening 및 활열성 defects가 강한 것을 지적할 수 있다.

  • PDF