• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제5권10호
• /
• pp.471-476
• /
• 2016

설계 단계에서 소프트웨어 아키텍처는 소프트웨어 품질을 좌우한다. 아키텍처 연동은 소프트웨어 품질에 영향을 주게 된다. 그 결과 소프트웨어 만족도가 낮아진다. 따라서 아키텍처에서 유연한 아키텍처와 품질을 위하여 구성요소 확인이 필요하게 된다. 본 논문에서는 아키텍처 연동의 구성 요소들을 제안하고자 한다.

• 한국항해항만학회지
• /
• 제43권6호
• /
• pp.353-360
• /
• 2019

Technology-driven development of a new system makes it difficult for users and stakeholders to identify or intervene in the development process, resulting in systems with unnecessary functions and poor quality services. Applying the software architecture design process to the initial design of the navigation system platform of autonomous ships enables the development of a system that reflects the required functions and service quality of the stakeholders. The design, which includes all of the subsystems that make up an autonomous ship platform, is close to an enterprise architecture. Thus, we strived to design a navigation system platform suitable for the design range of the software architecture. This study analyzed the definition of functional requirements, and quality attributes by applying the software architecture design procedure. This study was conducted to identify the characteristics of the navigation system and platform needs, and the stakeholders were identified. To derive the functional requirements and constraints of the platform, a quality attributes workshop was held engaging stakeholders, and the results of the analysis of functional requirements and quality attributes were listed. Based on the results of this study, the architect can establish the evidence and technical solutions that are integral for the architecture development, and will facilitate the creation of quality attribute scenarios.

• 건축역사연구
• /
• 제13권4호
• /
• pp.35-54
• /
• 2004

Perception of architectural experience is different in different culture. This paper aims to identify how the experience of architecture is understood to be different in Eastern and Western culture. The discussion is based on the idea that the Western architecture placed more emphasis on visual perception, while the Eastern, on mutual responsiveness between man and built environment. The fact that the Western culture is more visually oriented than other culture, and therefore visual aspect of architecture, too, is considered to be very important, is already widely agreed among scholars. But, then, what had been considered to be important in the architectural experience in the East? It is the degree and quality of mutual responsiveness between man and architectural environment. This fact influenced much on the making of architecture of course, and the same fact played the key role in making the Eastern architecture different from that of the West. We are so used to the way of architecture of the West, that the quality of responsiveness is unknown if not forgotten. However, it is not the quality that was useful only in traditional society of the East, but necessary in our modem period as well. The quality for responsiveness, therefore, should be rediscovered and restored as the prime value and quality of architecture in the future architecture.

• 한국디지털건축인테리어학회논문집
• /
• 제11권1호
• /
• pp.15-22
• /
• 2011

The purpose of this study is to develop design quality indicator for improvement of public architecture in Korea. The spatial scope of the study which sees limited at 'domestic public buildings'. The study contents scope is to develop design quality indicator to use design phase and evaluation of 'public buildings'. For this design quality indicator, we have analysed various domestic and international institutions associated with architecture design. And, design indicator for the possibility of application in public buildings were extracted. Through this work design quality indicator specific and objective was drawn. The results of this study 8 category were drawn 'Public', 'Harmony', 'Impact', 'Access', 'Landscape', 'Use', 'Sustainable', 'Technology'. Also, 29 Design quality Indicator were suggested. Finally, this study was developed by utilizing Design Quality Indicator can be utilized in the design phase, the evaluation process should be developed.

• 한국가구학회지
• /
• 제24권1호
• /
• pp.70-78
• /
• 2013

Indoor air quality control has been strengthened within childcare facilities and welfare communities for the elderly and infirm. I have researched the indoor air quality of kids caf$\acute{e}$s. The quality was determined by the measurement of $CO_2$ and HCHO, and the result was used in understanding of the current status of indoor air quality control. The higher level of $CO_2$ and HCHO were found in the playground area where children use compared to the area for guardians in kids caf$\acute{e}$s. And the more people in the caf$\acute{e}$s, the more $CO_2$ and HCHO were generated. It is judged that kids furniture produce harmful substances for children. Hence, the government regulations for kids caf$\acute{e}$s should be improved by reinforcing the indoor air quality control, considering that the main customers are children not adults.

• 시스템엔지니어링학술지
• /
• 제8권1호
• /
• pp.21-28
• /
• 2012

Development of the system that has required performance is the most important figure and that is the key of project succeed. In order to perform that, systems engineering has come to the fore as a solution. In each step of system engineering process, particularly, requirement analysis and derivation, logical solution, architecture design step are known to affect many of the function and efficiency. Of these, this paper focus on architecture design. We introduce methodology for physical architecture design by applying DSM(Design Structure Matrix) methodology which is based on result of logical solution from MBSE methodology.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.284-288
• /
• 2015

Recently, the mandate on utilizing BIM implemented by public institutions of many countries has great impact on the significantly increasing practices of BIM. The improvement of work efficiency and productivity, which is occurred by BIM adoption, depends on the consistency and accuracy of data. To maximize the benefit of BIM, the interests in BIM data quality have been enlarging all over the world. The BIM data quality pre-check, which is conducted by designer in the design phase, offers opportunities for quality improvement by continuously assessing BIM data. However, BIM quality pre-check is being conducted under arbitrary interpretation of users because of the absence of specific review factors and assessment methods for checking BIM quality. The purpose of this study is to establish an automated BIM quality pre-checking system to improve BIM design quality effectively and efficiently. It could be expected to meet the owner's requirements and to minimize the cost and time occurred additionally from revising and reproducing data by constructing consistency and accuracy of it.

• 한국가구학회지
• /
• 제26권1호
• /
• pp.71-76
• /
• 2015

It is important thing that air quality affects human health. And It is more important thing that Indoor Air Quality more affects human health than Outdoor Air Quality. The cause of that is indoor air pollutants are more absorbed than outdoor air pollutants. By the way, in case of Multi-use facility for example office, department store, school etc., it has a feature that there are more people than any other buildings. therethrough, effects of Indoor Air Quality of Multi-use facility affect more people's health than Indoor Air Quality of any other buildings. However, in multi-use facility, specifically retail store, chemical treated materials are used for interior finishing, showcase finishing and product finishing because esthetic element is more added for detention of customer. Consequently, in place where demands brisk sales, possibility that indoor air is polluted by VOCs is high. This study considered retail store's Indoor Air Quality. as result of experiment, figure of department store's air pollution exceed about 5~20 times in guideline of multi-use facility's Indoor Air Quality in any kind of shop of department store (guideline : $500{\mu}g/m^3$).

• 품질경영학회지
• /
• 제44권4호
• /
• pp.735-749
• /
• 2016

Purpose: This study is addressing the establishment of the knowledge information system supplying the quality management of weapon system. It is going to support the continuous quality management through the linkages and integration between the product structure and the quality information. Methods: The interrelated relationship of the product structure information and quality information of weapon system would be expressed explicitly by taking advantage of the ontology concept. The quality information of distributed systems would be integrated through the SOA(Service Oriented Architecture)-based Web services. After defining the inference rules, which could be utilized in the quality management, in the constructed knowledge information system, the quality information would be inferred through the queries. Results: By building the integrated quality information knowledge system through the ontology and SOA, the connectivity between the product structures and dispersed quality information was enhanced. The utility and applicability of this study were checked up through the inferences on the products and quality information by using the information built by the semantic relationship of facts. Conclusion: We established the knowledge and information system as a systematic approach to support the quality management of weapon system. This is not affected by the organizations and systems, and it seems that it could be utilized across the quality management as the efficient knowledge sharing architecture supporting the quality management of weapon systems in the aspect of the product integration.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권7호
• /
• pp.2455-2475
• /
• 2021

Patient Navigation Program (PNP) is considered as an important implementation of health care systems that can assist in patient's treatment. Due to the feasibility of PNP implementation, a systematic reuse is needed for a wide adoption of PNP computerized system. SPL is one of the promising systematic reuse approaches for creating a reusable architecture to enabled reuse in several similar applications of PNP systems which has its own variations with other applications. However, stakeholder decision making which result from the imprecise, uncertain, and subjective nature of architecture selection based on quality attributes (QA) further hinders the development of the product line architecture. Therefore, this study aims to propose a quality-driven approach using Multi-Criteria Decision Analysis (MCDA) techniques for Software Product Line Architecture (SPLA) to have an objective selection based on the QA of stakeholders in the domain of PNP. There are two steps proposed to this approach. First, a clear representation of quality is proposed by extending feature model (FM) with QA feature to determine the QA in the early phase of architecture selection. Second, MCDA techniques were applied for architecture selection based on objective preference for certain QA in the domain of PNP. The result of the proposed approach is the implementation of the PNP system with SPLA that had been selected using MCDA techniques. Evaluation for the approach is done by checking the approach's applicability in a case study and stakeholder validation. Evaluation on ease of use and usefulness of the approach with selected stakeholders have shown positive responses. The evaluation results proved that the proposed approach assisted in the implementation of PNP systems.